linux-stable.git/drivers/md, branch v6.4.8

dm cache policy smq: ensure IO doesn't prevent cleaner policy progress

2023-08-03T08:26:13+00:00

commit 1e4ab7b4c881cf26c1c72b3f56519e03475486fb upstream.

When using the cleaner policy to decommission the cache, there is
never any writeback started from the cache as it is constantly delayed
due to normal I/O keeping the device busy. Meaning @idle=false was
always being passed to clean_target_met()

Fix this by adding a specific 'cleaner' flag that is set when the
cleaner policy is configured. This flag serves to always allow the
cleaner's writeback work to be queued until the cache is
decommissioned (even if the cache isn't idle).

Reported-by: David Jeffery 
Fixes: b29d4986d0da ("dm cache: significant rework to leverage dm-bio-prison-v2")
Cc: stable@vger.kernel.org
Signed-off-by: Joe Thornber 
Signed-off-by: Mike Snitzer 
Signed-off-by: Greg Kroah-Hartman

dm raid: protect md_stop() with 'reconfig_mutex'

2023-08-03T08:25:58+00:00

[ Upstream commit 7d5fff8982a2199d49ec067818af7d84d4f95ca0 ]

__md_stop_writes() and __md_stop() will modify many fields that are
protected by 'reconfig_mutex', and all the callers will grab
'reconfig_mutex' except for md_stop().

Also, update md_stop() to make certain 'reconfig_mutex' is held using
lockdep_assert_held().

Fixes: 9d09e663d550 ("dm: raid456 basic support")
Signed-off-by: Yu Kuai 
Signed-off-by: Mike Snitzer 
Signed-off-by: Sasha Levin

dm raid: clean up four equivalent goto tags in raid_ctr()

2023-08-03T08:25:58+00:00

[ Upstream commit e74c874eabe2e9173a8fbdad616cd89c70eb8ffd ]

There are four equivalent goto tags in raid_ctr(), clean them up to
use just one.

There is no functional change and this is preparation to fix
raid_ctr()'s unprotected md_stop().

Signed-off-by: Yu Kuai 
Signed-off-by: Mike Snitzer 
Stable-dep-of: 7d5fff8982a2 ("dm raid: protect md_stop() with 'reconfig_mutex'")
Signed-off-by: Sasha Levin

dm raid: fix missing reconfig_mutex unlock in raid_ctr() error paths

2023-08-03T08:25:58+00:00

[ Upstream commit bae3028799dc4f1109acc4df37c8ff06f2d8f1a0 ]

In the error paths 'bad_stripe_cache' and 'bad_check_reshape',
'reconfig_mutex' is still held after raid_ctr() returns.

Fixes: 9dbd1aa3a81c ("dm raid: add reshaping support to the target")
Signed-off-by: Yu Kuai 
Signed-off-by: Mike Snitzer 
Signed-off-by: Sasha Levin

md/raid10: prevent soft lockup while flush writes

2023-07-27T06:56:45+00:00

[ Upstream commit 010444623e7f4da6b4a4dd603a7da7469981e293 ]

Currently, there is no limit for raid1/raid10 plugged bio. While flushing
writes, raid1 has cond_resched() while raid10 doesn't, and too many
writes can cause soft lockup.

Follow up soft lockup can be triggered easily with writeback test for
raid10 with ramdisks:

watchdog: BUG: soft lockup - CPU#10 stuck for 27s! [md0_raid10:1293]
Call Trace:
 
 call_rcu+0x16/0x20
 put_object+0x41/0x80
 __delete_object+0x50/0x90
 delete_object_full+0x2b/0x40
 kmemleak_free+0x46/0xa0
 slab_free_freelist_hook.constprop.0+0xed/0x1a0
 kmem_cache_free+0xfd/0x300
 mempool_free_slab+0x1f/0x30
 mempool_free+0x3a/0x100
 bio_free+0x59/0x80
 bio_put+0xcf/0x2c0
 free_r10bio+0xbf/0xf0
 raid_end_bio_io+0x78/0xb0
 one_write_done+0x8a/0xa0
 raid10_end_write_request+0x1b4/0x430
 bio_endio+0x175/0x320
 brd_submit_bio+0x3b9/0x9b7 [brd]
 __submit_bio+0x69/0xe0
 submit_bio_noacct_nocheck+0x1e6/0x5a0
 submit_bio_noacct+0x38c/0x7e0
 flush_pending_writes+0xf0/0x240
 raid10d+0xac/0x1ed0

Fix the problem by adding cond_resched() to raid10 like what raid1 did.

Note that unlimited plugged bio still need to be optimized, for example,
in the case of lots of dirty pages writeback, this will take lots of
memory and io will spend a long time in plug, hence io latency is bad.

Signed-off-by: Yu Kuai 
Signed-off-by: Song Liu 
Link: https://lore.kernel.org/r/20230529131106.2123367-2-yukuai1@huaweicloud.com
Signed-off-by: Sasha Levin

md: fix data corruption for raid456 when reshape restart while grow up

2023-07-27T06:56:45+00:00

[ Upstream commit 873f50ece41aad5c4f788a340960c53774b5526e ]

Currently, if reshape is interrupted, echo "reshape" to sync_action will
restart reshape from scratch, for example:

echo frozen > sync_action
echo reshape > sync_action

This will corrupt data before reshape_position if the array is growing,
fix the problem by continue reshape from reshape_position.

Reported-by: Peter Neuwirth 
Link: https://lore.kernel.org/linux-raid/e2f96772-bfbc-f43b-6da1-f520e5164536@online.de/
Signed-off-by: Yu Kuai 
Signed-off-by: Song Liu 
Link: https://lore.kernel.org/r/20230512015610.821290-3-yukuai1@huaweicloud.com
Signed-off-by: Sasha Levin

dm: verity-loadpin: Add NULL pointer check for 'bdev' parameter

2023-07-23T11:54:08+00:00

commit 47f04616f2c9b2f4f0c9127e30ca515a078db591 upstream.

Add a NULL check for the 'bdev' parameter of
dm_verity_loadpin_is_bdev_trusted(). The function is called
by loadpin_check(), which passes the block device that
corresponds to the super block of the file system from which
a file is being loaded. Generally a super_block structure has
an associated block device, however that is not always the
case (e.g. tmpfs).

Cc: stable@vger.kernel.org # v6.0+
Fixes: b6c1c5745ccc ("dm: Add verity helpers for LoadPin")
Signed-off-by: Matthias Kaehlcke 
Link: https://lore.kernel.org/r/20230627202800.1.Id63f7f59536d20f1ab83e1abdc1fda1471c7d031@changeid
Signed-off-by: Kees Cook 
Signed-off-by: Greg Kroah-Hartman

md/raid0: add discard support for the 'original' layout

2023-07-23T11:54:01+00:00

commit e836007089ba8fdf24e636ef2b007651fb4582e6 upstream.

We've found that using raid0 with the 'original' layout and discard
enabled with different disk sizes (such that at least two zones are
created) can result in data corruption. This is due to the fact that
the discard handling in 'raid0_handle_discard()' assumes the 'alternate'
layout. We've seen this corruption using ext4 but other filesystems are
likely susceptible as well.

More specifically, while multiple zones are necessary to create the
corruption, the corruption may not occur with multiple zones if they
layout in such a way the layout matches what the 'alternate' layout
would have produced. Thus, not all raid0 devices with the 'original'
layout, different size disks and discard enabled will encounter this
corruption.

The 3.14 kernel inadvertently changed the raid0 disk layout for different
size disks. Thus, running a pre-3.14 kernel and post-3.14 kernel on the
same raid0 array could corrupt data. This lead to the creation of the
'original' layout (to match the pre-3.14 layout) and the 'alternate' layout
(to match the post 3.14 layout) in the 5.4 kernel time frame and an option
to tell the kernel which layout to use (since it couldn't be autodetected).
However, when the 'original' layout was added back to 5.4 discard support
for the 'original' layout was not added leading this issue.

I've been able to reliably reproduce the corruption with the following
test case:

1. create raid0 array with different size disks using original layout
2. mkfs
3. mount -o discard
4. create lots of files
5. remove 1/2 the files
6. fstrim -a (or just the mount point for the raid0 array)
7. umount
8. fsck -fn /dev/md0 (spews all sorts of corruptions)

Let's fix this by adding proper discard support to the 'original' layout.
The fix 'maps' the 'original' layout disks to the order in which they are
read/written such that we can compare the disks in the same way that the
current 'alternate' layout does. A 'disk_shift' field is added to
'struct strip_zone'. This could be computed on the fly in
raid0_handle_discard() but by adding this field, we save some computation
in the discard path.

Note we could also potentially fix this by re-ordering the disks in the
zones that follow the first one, and then always read/writing them using
the 'alternate' layout. However, that is seen as a more substantial change,
and we are attempting the least invasive fix at this time to remedy the
corruption.

I've verified the change using the reproducer mentioned above. Typically,
the corruption is seen after less than 3 iterations, while the patch has
run 500+ iterations.

Cc: NeilBrown 
Cc: Song Liu 
Fixes: c84a1372df92 ("md/raid0: avoid RAID0 data corruption due to layout confusion.")
Cc: stable@vger.kernel.org
Signed-off-by: Jason Baron 
Signed-off-by: Song Liu 
Link: https://lore.kernel.org/r/20230623180523.1901230-1-jbaron@akamai.com
Signed-off-by: Greg Kroah-Hartman

dm integrity: reduce vmalloc space footprint on 32-bit architectures

2023-07-23T11:53:58+00:00

commit 6d50eb4725934fd22f5eeccb401000687c790fd0 upstream.

It was reported that dm-integrity runs out of vmalloc space on 32-bit
architectures. On x86, there is only 128MiB vmalloc space and dm-integrity
consumes it quickly because it has a 64MiB journal and 8MiB recalculate
buffer.

Fix this by reducing the size of the journal to 4MiB and the size of
the recalculate buffer to 1MiB, so that multiple dm-integrity devices
can be created and activated on 32-bit architectures.

Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka 
Signed-off-by: Mike Snitzer 
Signed-off-by: Greg Kroah-Hartman

md/raid1-10: fix casting from randomized structure in raid1_submit_write()

2023-07-19T14:36:59+00:00

commit b5a99602b74bbfa655be509c615181dd95b0719e upstream.

Following build error triggered while build with clang version 17.0.0
with W=1(this can't be reporduced with gcc 13.1.0):

drivers/md/raid1-10.c:117:25: error: casting from randomized structure
pointer type 'struct block_device *' to 'struct md_rdev *'
     117 |         struct md_rdev *rdev = (struct md_rdev *)bio->bi_bdev;
         |                                ^

Fix this by casting 'bio->bi_bdev' to 'void *', as it used to be.

Reported-by: kernel test robot 
Closes: https://lore.kernel.org/oe-kbuild-all/202306142042.fmjfmTF8-lkp@intel.com/
Fixes: 8295efbe68c0 ("md/raid1-10: factor out a helper to submit normal write")
Signed-off-by: Yu Kuai 
Signed-off-by: Song Liu 
Link: https://lore.kernel.org/r/20230616012136.3047071-1-yukuai1@huaweicloud.com
Signed-off-by: Greg Kroah-Hartman