linux-stable.git/drivers/md, branch v5.4.211 Linux kernel stable tree drivers:md:fix a potential use-after-free bug 2022-08-25T09:18:35+00:00 Wentao_Liang Wentao_Liang_g@163.com 2022-07-28T11:39:19+00:00 f5d46f1b47f65da1faf468277b261eb78c8e25b5 [ Upstream commit 104212471b1c1817b311771d817fb692af983173 ] In line 2884, "raid5_release_stripe(sh);" drops the reference to sh and may cause sh to be released. However, sh is subsequently used in lines 2886 "if (sh->batch_head && sh != sh->batch_head)". This may result in an use-after-free bug. It can be fixed by moving "raid5_release_stripe(sh);" to the bottom of the function. Signed-off-by: Wentao_Liang <Wentao_Liang_g@163.com> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 104212471b1c1817b311771d817fb692af983173 ]

In line 2884, "raid5_release_stripe(sh);" drops the reference to sh and
may cause sh to be released. However, sh is subsequently used in lines
2886 "if (sh->batch_head && sh != sh->batch_head)". This may result in an
use-after-free bug.

It can be fixed by moving "raid5_release_stripe(sh);" to the bottom of
the function.

Signed-off-by: Wentao_Liang <Wentao_Liang_g@163.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
dm writecache: set a default MAX_WRITEBACK_JOBS 2022-08-25T09:18:14+00:00 Mikulas Patocka mpatocka@redhat.com 2022-07-13T11:09:04+00:00 2c7e93e33832180893fb88f2b06b02694bddf988 commit ca7dc242e358e46d963b32f9d9dd829785a9e957 upstream. dm-writecache has the capability to limit the number of writeback jobs in progress. However, this feature was off by default. As such there were some out-of-memory crashes observed when lowering the low watermark while the cache is full. This commit enables writeback limit by default. It is set to 256MiB or 1/16 of total system memory, whichever is smaller. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ca7dc242e358e46d963b32f9d9dd829785a9e957 upstream.

dm-writecache has the capability to limit the number of writeback jobs
in progress. However, this feature was off by default. As such there
were some out-of-memory crashes observed when lowering the low
watermark while the cache is full.

This commit enables writeback limit by default. It is set to 256MiB or
1/16 of total system memory, whichever is smaller.

Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dm thin: fix use-after-free crash in dm_sm_register_threshold_callback 2022-08-25T09:18:14+00:00 Luo Meng luomeng12@huawei.com 2022-07-14T11:28:25+00:00 05cef0999b3208b5a6ede1bfac855139e4de55ef commit 3534e5a5ed2997ca1b00f44a0378a075bd05e8a3 upstream. Fault inject on pool metadata device reports: BUG: KASAN: use-after-free in dm_pool_register_metadata_threshold+0x40/0x80 Read of size 8 at addr ffff8881b9d50068 by task dmsetup/950 CPU: 7 PID: 950 Comm: dmsetup Tainted: G W 5.19.0-rc6 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_address_description.constprop.0.cold+0xeb/0x3f4 kasan_report.cold+0xe6/0x147 dm_pool_register_metadata_threshold+0x40/0x80 pool_ctr+0xa0a/0x1150 dm_table_add_target+0x2c8/0x640 table_load+0x1fd/0x430 ctl_ioctl+0x2c4/0x5a0 dm_ctl_ioctl+0xa/0x10 __x64_sys_ioctl+0xb3/0xd0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 This can be easily reproduced using: echo offline > /sys/block/sda/device/state dd if=/dev/zero of=/dev/mapper/thin bs=4k count=10 dmsetup load pool --table "0 20971520 thin-pool /dev/sda /dev/sdb 128 0 0" If a metadata commit fails, the transaction will be aborted and the metadata space maps will be destroyed. If a DM table reload then happens for this failed thin-pool, a use-after-free will occur in dm_sm_register_threshold_callback (called from dm_pool_register_metadata_threshold). Fix this by in dm_pool_register_metadata_threshold() by returning the -EINVAL error if the thin-pool is in fail mode. Also fail pool_ctr() with a new error message: "Error registering metadata threshold". Fixes: ac8c3f3df65e4 ("dm thin: generate event when metadata threshold passed") Cc: stable@vger.kernel.org Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Luo Meng <luomeng12@huawei.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3534e5a5ed2997ca1b00f44a0378a075bd05e8a3 upstream.

Fault inject on pool metadata device reports:
  BUG: KASAN: use-after-free in dm_pool_register_metadata_threshold+0x40/0x80
  Read of size 8 at addr ffff8881b9d50068 by task dmsetup/950

  CPU: 7 PID: 950 Comm: dmsetup Tainted: G        W         5.19.0-rc6 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
  Call Trace:
   <TASK>
   dump_stack_lvl+0x34/0x44
   print_address_description.constprop.0.cold+0xeb/0x3f4
   kasan_report.cold+0xe6/0x147
   dm_pool_register_metadata_threshold+0x40/0x80
   pool_ctr+0xa0a/0x1150
   dm_table_add_target+0x2c8/0x640
   table_load+0x1fd/0x430
   ctl_ioctl+0x2c4/0x5a0
   dm_ctl_ioctl+0xa/0x10
   __x64_sys_ioctl+0xb3/0xd0
   do_syscall_64+0x35/0x80
   entry_SYSCALL_64_after_hwframe+0x46/0xb0

This can be easily reproduced using:
  echo offline > /sys/block/sda/device/state
  dd if=/dev/zero of=/dev/mapper/thin bs=4k count=10
  dmsetup load pool --table "0 20971520 thin-pool /dev/sda /dev/sdb 128 0 0"

If a metadata commit fails, the transaction will be aborted and the
metadata space maps will be destroyed. If a DM table reload then
happens for this failed thin-pool, a use-after-free will occur in
dm_sm_register_threshold_callback (called from
dm_pool_register_metadata_threshold).

Fix this by in dm_pool_register_metadata_threshold() by returning the
-EINVAL error if the thin-pool is in fail mode. Also fail pool_ctr()
with a new error message: "Error registering metadata threshold".

Fixes: ac8c3f3df65e4 ("dm thin: generate event when metadata threshold passed")
Cc: stable@vger.kernel.org
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dm raid: fix address sanitizer warning in raid_status 2022-08-25T09:18:14+00:00 Mikulas Patocka mpatocka@redhat.com 2022-07-24T18:31:35+00:00 cb583ca6125ac64c98e9d65128e95ebb5be7d322 commit 1fbeea217d8f297fe0e0956a1516d14ba97d0396 upstream. There is this warning when using a kernel with the address sanitizer and running this testsuite: https://gitlab.com/cki-project/kernel-tests/-/tree/main/storage/swraid/scsi_raid ================================================================== BUG: KASAN: slab-out-of-bounds in raid_status+0x1747/0x2820 [dm_raid] Read of size 4 at addr ffff888079d2c7e8 by task lvcreate/13319 CPU: 0 PID: 13319 Comm: lvcreate Not tainted 5.18.0-0.rc3.<snip> #1 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Call Trace: <TASK> dump_stack_lvl+0x6a/0x9c print_address_description.constprop.0+0x1f/0x1e0 print_report.cold+0x55/0x244 kasan_report+0xc9/0x100 raid_status+0x1747/0x2820 [dm_raid] dm_ima_measure_on_table_load+0x4b8/0xca0 [dm_mod] table_load+0x35c/0x630 [dm_mod] ctl_ioctl+0x411/0x630 [dm_mod] dm_ctl_ioctl+0xa/0x10 [dm_mod] __x64_sys_ioctl+0x12a/0x1a0 do_syscall_64+0x5b/0x80 The warning is caused by reading conf->max_nr_stripes in raid_status. The code in raid_status reads mddev->private, casts it to struct r5conf and reads the entry max_nr_stripes. However, if we have different raid type than 4/5/6, mddev->private doesn't point to struct r5conf; it may point to struct r0conf, struct r1conf, struct r10conf or struct mpconf. If we cast a pointer to one of these structs to struct r5conf, we will be reading invalid memory and KASAN warns about it. Fix this bug by reading struct r5conf only if raid type is 4, 5 or 6. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1fbeea217d8f297fe0e0956a1516d14ba97d0396 upstream.

There is this warning when using a kernel with the address sanitizer
and running this testsuite:
https://gitlab.com/cki-project/kernel-tests/-/tree/main/storage/swraid/scsi_raid

==================================================================
BUG: KASAN: slab-out-of-bounds in raid_status+0x1747/0x2820 [dm_raid]
Read of size 4 at addr ffff888079d2c7e8 by task lvcreate/13319
CPU: 0 PID: 13319 Comm: lvcreate Not tainted 5.18.0-0.rc3.<snip> #1
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Call Trace:
 <TASK>
 dump_stack_lvl+0x6a/0x9c
 print_address_description.constprop.0+0x1f/0x1e0
 print_report.cold+0x55/0x244
 kasan_report+0xc9/0x100
 raid_status+0x1747/0x2820 [dm_raid]
 dm_ima_measure_on_table_load+0x4b8/0xca0 [dm_mod]
 table_load+0x35c/0x630 [dm_mod]
 ctl_ioctl+0x411/0x630 [dm_mod]
 dm_ctl_ioctl+0xa/0x10 [dm_mod]
 __x64_sys_ioctl+0x12a/0x1a0
 do_syscall_64+0x5b/0x80

The warning is caused by reading conf->max_nr_stripes in raid_status. The
code in raid_status reads mddev->private, casts it to struct r5conf and
reads the entry max_nr_stripes.

However, if we have different raid type than 4/5/6, mddev->private
doesn't point to struct r5conf; it may point to struct r0conf, struct
r1conf, struct r10conf or struct mpconf. If we cast a pointer to one
of these structs to struct r5conf, we will be reading invalid memory
and KASAN warns about it.

Fix this bug by reading struct r5conf only if raid type is 4, 5 or 6.

Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dm raid: fix address sanitizer warning in raid_resume 2022-08-25T09:18:14+00:00 Mikulas Patocka mpatocka@redhat.com 2022-07-24T18:33:52+00:00 71f601c779b3cc1baf497796f5b922c3fe5d2a1e commit 7dad24db59d2d2803576f2e3645728866a056dab upstream. There is a KASAN warning in raid_resume when running the lvm test lvconvert-raid.sh. The reason for the warning is that mddev->raid_disks is greater than rs->raid_disks, so the loop touches one entry beyond the allocated length. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7dad24db59d2d2803576f2e3645728866a056dab upstream.

There is a KASAN warning in raid_resume when running the lvm test
lvconvert-raid.sh. The reason for the warning is that mddev->raid_disks
is greater than rs->raid_disks, so the loop touches one entry beyond
the allocated length.

Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dm: return early from dm_pr_call() if DM device is suspended 2022-08-25T09:17:37+00:00 Mike Snitzer snitzer@kernel.org 2022-07-22T19:31:23+00:00 08cc3995fb6bdbbdb8423e361d73457e94b07ad9 [ Upstream commit e120a5f1e78fab6223544e425015f393d90d6f0d ] Otherwise PR ops may be issued while the broader DM device is being reconfigured, etc. Fixes: 9c72bad1f31a ("dm: call PR reserve/unreserve on each underlying device") Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e120a5f1e78fab6223544e425015f393d90d6f0d ]

Otherwise PR ops may be issued while the broader DM device is being
reconfigured, etc.

Fixes: 9c72bad1f31a ("dm: call PR reserve/unreserve on each underlying device")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
md-raid10: fix KASAN warning 2022-08-25T09:17:25+00:00 Mikulas Patocka mpatocka@redhat.com 2022-07-26T08:33:12+00:00 ce839b9331c11780470f3d727b6fe3c2794a4620 commit d17f744e883b2f8d13cca252d71cfe8ace346f7d upstream. There's a KASAN warning in raid10_remove_disk when running the lvm test lvconvert-raid-reshape.sh. We fix this warning by verifying that the value "number" is valid. BUG: KASAN: slab-out-of-bounds in raid10_remove_disk+0x61/0x2a0 [raid10] Read of size 8 at addr ffff889108f3d300 by task mdX_raid10/124682 CPU: 3 PID: 124682 Comm: mdX_raid10 Not tainted 5.19.0-rc6 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_report.cold+0x45/0x57a ? __lock_text_start+0x18/0x18 ? raid10_remove_disk+0x61/0x2a0 [raid10] kasan_report+0xa8/0xe0 ? raid10_remove_disk+0x61/0x2a0 [raid10] raid10_remove_disk+0x61/0x2a0 [raid10] Buffer I/O error on dev dm-76, logical block 15344, async page read ? __mutex_unlock_slowpath.constprop.0+0x1e0/0x1e0 remove_and_add_spares+0x367/0x8a0 [md_mod] ? super_written+0x1c0/0x1c0 [md_mod] ? mutex_trylock+0xac/0x120 ? _raw_spin_lock+0x72/0xc0 ? _raw_spin_lock_bh+0xc0/0xc0 md_check_recovery+0x848/0x960 [md_mod] raid10d+0xcf/0x3360 [raid10] ? sched_clock_cpu+0x185/0x1a0 ? rb_erase+0x4d4/0x620 ? var_wake_function+0xe0/0xe0 ? psi_group_change+0x411/0x500 ? preempt_count_sub+0xf/0xc0 ? _raw_spin_lock_irqsave+0x78/0xc0 ? __lock_text_start+0x18/0x18 ? raid10_sync_request+0x36c0/0x36c0 [raid10] ? preempt_count_sub+0xf/0xc0 ? _raw_spin_unlock_irqrestore+0x19/0x40 ? del_timer_sync+0xa9/0x100 ? try_to_del_timer_sync+0xc0/0xc0 ? _raw_spin_lock_irqsave+0x78/0xc0 ? __lock_text_start+0x18/0x18 ? _raw_spin_unlock_irq+0x11/0x24 ? __list_del_entry_valid+0x68/0xa0 ? finish_wait+0xa3/0x100 md_thread+0x161/0x260 [md_mod] ? unregister_md_personality+0xa0/0xa0 [md_mod] ? _raw_spin_lock_irqsave+0x78/0xc0 ? prepare_to_wait_event+0x2c0/0x2c0 ? unregister_md_personality+0xa0/0xa0 [md_mod] kthread+0x148/0x180 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Allocated by task 124495: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x80/0xa0 setup_conf+0x140/0x5c0 [raid10] raid10_run+0x4cd/0x740 [raid10] md_run+0x6f9/0x1300 [md_mod] raid_ctr+0x2531/0x4ac0 [dm_raid] dm_table_add_target+0x2b0/0x620 [dm_mod] table_load+0x1c8/0x400 [dm_mod] ctl_ioctl+0x29e/0x560 [dm_mod] dm_compat_ctl_ioctl+0x7/0x20 [dm_mod] __do_compat_sys_ioctl+0xfa/0x160 do_syscall_64+0x90/0xc0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Last potentially related work creation: kasan_save_stack+0x1e/0x40 __kasan_record_aux_stack+0x9e/0xc0 kvfree_call_rcu+0x84/0x480 timerfd_release+0x82/0x140 L __fput+0xfa/0x400 task_work_run+0x80/0xc0 exit_to_user_mode_prepare+0x155/0x160 syscall_exit_to_user_mode+0x12/0x40 do_syscall_64+0x42/0xc0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Second to last potentially related work creation: kasan_save_stack+0x1e/0x40 __kasan_record_aux_stack+0x9e/0xc0 kvfree_call_rcu+0x84/0x480 timerfd_release+0x82/0x140 __fput+0xfa/0x400 task_work_run+0x80/0xc0 exit_to_user_mode_prepare+0x155/0x160 syscall_exit_to_user_mode+0x12/0x40 do_syscall_64+0x42/0xc0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 The buggy address belongs to the object at ffff889108f3d200 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 0 bytes to the right of 256-byte region [ffff889108f3d200, ffff889108f3d300) The buggy address belongs to the physical page: page:000000007ef2a34c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1108f3c head:000000007ef2a34c order:2 compound_mapcount:0 compound_pincount:0 flags: 0x4000000000010200(slab|head|zone=2) raw: 4000000000010200 0000000000000000 dead000000000001 ffff889100042b40 raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff889108f3d200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff889108f3d280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff889108f3d300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff889108f3d380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff889108f3d400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d17f744e883b2f8d13cca252d71cfe8ace346f7d upstream.

There's a KASAN warning in raid10_remove_disk when running the lvm
test lvconvert-raid-reshape.sh. We fix this warning by verifying that the
value "number" is valid.

BUG: KASAN: slab-out-of-bounds in raid10_remove_disk+0x61/0x2a0 [raid10]
Read of size 8 at addr ffff889108f3d300 by task mdX_raid10/124682

CPU: 3 PID: 124682 Comm: mdX_raid10 Not tainted 5.19.0-rc6 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
Call Trace:
 <TASK>
 dump_stack_lvl+0x34/0x44
 print_report.cold+0x45/0x57a
 ? __lock_text_start+0x18/0x18
 ? raid10_remove_disk+0x61/0x2a0 [raid10]
 kasan_report+0xa8/0xe0
 ? raid10_remove_disk+0x61/0x2a0 [raid10]
 raid10_remove_disk+0x61/0x2a0 [raid10]
Buffer I/O error on dev dm-76, logical block 15344, async page read
 ? __mutex_unlock_slowpath.constprop.0+0x1e0/0x1e0
 remove_and_add_spares+0x367/0x8a0 [md_mod]
 ? super_written+0x1c0/0x1c0 [md_mod]
 ? mutex_trylock+0xac/0x120
 ? _raw_spin_lock+0x72/0xc0
 ? _raw_spin_lock_bh+0xc0/0xc0
 md_check_recovery+0x848/0x960 [md_mod]
 raid10d+0xcf/0x3360 [raid10]
 ? sched_clock_cpu+0x185/0x1a0
 ? rb_erase+0x4d4/0x620
 ? var_wake_function+0xe0/0xe0
 ? psi_group_change+0x411/0x500
 ? preempt_count_sub+0xf/0xc0
 ? _raw_spin_lock_irqsave+0x78/0xc0
 ? __lock_text_start+0x18/0x18
 ? raid10_sync_request+0x36c0/0x36c0 [raid10]
 ? preempt_count_sub+0xf/0xc0
 ? _raw_spin_unlock_irqrestore+0x19/0x40
 ? del_timer_sync+0xa9/0x100
 ? try_to_del_timer_sync+0xc0/0xc0
 ? _raw_spin_lock_irqsave+0x78/0xc0
 ? __lock_text_start+0x18/0x18
 ? _raw_spin_unlock_irq+0x11/0x24
 ? __list_del_entry_valid+0x68/0xa0
 ? finish_wait+0xa3/0x100
 md_thread+0x161/0x260 [md_mod]
 ? unregister_md_personality+0xa0/0xa0 [md_mod]
 ? _raw_spin_lock_irqsave+0x78/0xc0
 ? prepare_to_wait_event+0x2c0/0x2c0
 ? unregister_md_personality+0xa0/0xa0 [md_mod]
 kthread+0x148/0x180
 ? kthread_complete_and_exit+0x20/0x20
 ret_from_fork+0x1f/0x30
 </TASK>

Allocated by task 124495:
 kasan_save_stack+0x1e/0x40
 __kasan_kmalloc+0x80/0xa0
 setup_conf+0x140/0x5c0 [raid10]
 raid10_run+0x4cd/0x740 [raid10]
 md_run+0x6f9/0x1300 [md_mod]
 raid_ctr+0x2531/0x4ac0 [dm_raid]
 dm_table_add_target+0x2b0/0x620 [dm_mod]
 table_load+0x1c8/0x400 [dm_mod]
 ctl_ioctl+0x29e/0x560 [dm_mod]
 dm_compat_ctl_ioctl+0x7/0x20 [dm_mod]
 __do_compat_sys_ioctl+0xfa/0x160
 do_syscall_64+0x90/0xc0
 entry_SYSCALL_64_after_hwframe+0x46/0xb0

Last potentially related work creation:
 kasan_save_stack+0x1e/0x40
 __kasan_record_aux_stack+0x9e/0xc0
 kvfree_call_rcu+0x84/0x480
 timerfd_release+0x82/0x140
L __fput+0xfa/0x400
 task_work_run+0x80/0xc0
 exit_to_user_mode_prepare+0x155/0x160
 syscall_exit_to_user_mode+0x12/0x40
 do_syscall_64+0x42/0xc0
 entry_SYSCALL_64_after_hwframe+0x46/0xb0

Second to last potentially related work creation:
 kasan_save_stack+0x1e/0x40
 __kasan_record_aux_stack+0x9e/0xc0
 kvfree_call_rcu+0x84/0x480
 timerfd_release+0x82/0x140
 __fput+0xfa/0x400
 task_work_run+0x80/0xc0
 exit_to_user_mode_prepare+0x155/0x160
 syscall_exit_to_user_mode+0x12/0x40
 do_syscall_64+0x42/0xc0
 entry_SYSCALL_64_after_hwframe+0x46/0xb0

The buggy address belongs to the object at ffff889108f3d200
 which belongs to the cache kmalloc-256 of size 256
The buggy address is located 0 bytes to the right of
 256-byte region [ffff889108f3d200, ffff889108f3d300)

The buggy address belongs to the physical page:
page:000000007ef2a34c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1108f3c
head:000000007ef2a34c order:2 compound_mapcount:0 compound_pincount:0
flags: 0x4000000000010200(slab|head|zone=2)
raw: 4000000000010200 0000000000000000 dead000000000001 ffff889100042b40
raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff889108f3d200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff889108f3d280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff889108f3d300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
                   ^
 ffff889108f3d380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff889108f3d400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dm raid: fix KASAN warning in raid5_add_disks 2022-07-07T15:36:48+00:00 Mikulas Patocka mpatocka@redhat.com 2022-06-29T17:40:57+00:00 f157bd9cf377a947fdb7035e69466b6ecdc17c17 commit 617b365872a247480e9dcd50a32c8d1806b21861 upstream. There's a KASAN warning in raid5_add_disk when running the LVM testsuite. The warning happens in the test lvconvert-raid-reshape-linear_to_raid6-single-type.sh. We fix the warning by verifying that rdev->saved_raid_disk is within limits. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 617b365872a247480e9dcd50a32c8d1806b21861 upstream.

There's a KASAN warning in raid5_add_disk when running the LVM testsuite.
The warning happens in the test
lvconvert-raid-reshape-linear_to_raid6-single-type.sh. We fix the warning
by verifying that rdev->saved_raid_disk is within limits.

Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dm raid: fix accesses beyond end of raid member array 2022-07-07T15:36:48+00:00 Heinz Mauelshagen heinzm@redhat.com 2022-06-27T22:37:22+00:00 90de15357504c8097ab29769dc6852e16281e9e8 commit 332bd0778775d0cf105c4b9e03e460b590749916 upstream. On dm-raid table load (using raid_ctr), dm-raid allocates an array rs->devs[rs->raid_disks] for the raid device members. rs->raid_disks is defined by the number of raid metadata and image tupples passed into the target's constructor. In the case of RAID layout changes being requested, that number can be different from the current number of members for existing raid sets as defined in their superblocks. Example RAID layout changes include: - raid1 legs being added/removed - raid4/5/6/10 number of stripes changed (stripe reshaping) - takeover to higher raid level (e.g. raid5 -> raid6) When accessing array members, rs->raid_disks must be used in control loops instead of the potentially larger value in rs->md.raid_disks. Otherwise it will cause memory access beyond the end of the rs->devs array. Fix this by changing code that is prone to out-of-bounds access. Also fix validate_raid_redundancy() to validate all devices that are added. Also, use braces to help clean up raid_iterate_devices(). The out-of-bounds memory accesses was discovered using KASAN. This commit was verified to pass all LVM2 RAID tests (with KASAN enabled). Cc: stable@vger.kernel.org Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 332bd0778775d0cf105c4b9e03e460b590749916 upstream.

On dm-raid table load (using raid_ctr), dm-raid allocates an array
rs->devs[rs->raid_disks] for the raid device members. rs->raid_disks
is defined by the number of raid metadata and image tupples passed
into the target's constructor.

In the case of RAID layout changes being requested, that number can be
different from the current number of members for existing raid sets as
defined in their superblocks. Example RAID layout changes include:
- raid1 legs being added/removed
- raid4/5/6/10 number of stripes changed (stripe reshaping)
- takeover to higher raid level (e.g. raid5 -> raid6)

When accessing array members, rs->raid_disks must be used in control
loops instead of the potentially larger value in rs->md.raid_disks.
Otherwise it will cause memory access beyond the end of the rs->devs
array.

Fix this by changing code that is prone to out-of-bounds access.
Also fix validate_raid_redundancy() to validate all devices that are
added. Also, use braces to help clean up raid_iterate_devices().

The out-of-bounds memory accesses was discovered using KASAN.

This commit was verified to pass all LVM2 RAID tests (with KASAN
enabled).

Cc: stable@vger.kernel.org
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dm mirror log: clear log bits up to BITS_PER_LONG boundary 2022-06-29T06:58:45+00:00 Mikulas Patocka mpatocka@redhat.com 2022-06-23T18:53:25+00:00 06a24ddba93aa0ceabf05cd91f679ba5d20d4cbd commit 90736eb3232d208ee048493f371075e4272e0944 upstream. Commit 85e123c27d5c ("dm mirror log: round up region bitmap size to BITS_PER_LONG") introduced a regression on 64-bit architectures in the lvm testsuite tests: lvcreate-mirror, mirror-names and vgsplit-operation. If the device is shrunk, we need to clear log bits beyond the end of the device. The code clears bits up to a 32-bit boundary and then calculates lc->sync_count by summing set bits up to a 64-bit boundary (the commit changed that; previously, this boundary was 32-bit too). So, it was using some non-zeroed bits in the calculation and this caused misbehavior. Fix this regression by clearing bits up to BITS_PER_LONG boundary. Fixes: 85e123c27d5c ("dm mirror log: round up region bitmap size to BITS_PER_LONG") Cc: stable@vger.kernel.org Reported-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 90736eb3232d208ee048493f371075e4272e0944 upstream.

Commit 85e123c27d5c ("dm mirror log: round up region bitmap size to
BITS_PER_LONG") introduced a regression on 64-bit architectures in the
lvm testsuite tests: lvcreate-mirror, mirror-names and vgsplit-operation.

If the device is shrunk, we need to clear log bits beyond the end of the
device. The code clears bits up to a 32-bit boundary and then calculates
lc->sync_count by summing set bits up to a 64-bit boundary (the commit
changed that; previously, this boundary was 32-bit too). So, it was using
some non-zeroed bits in the calculation and this caused misbehavior.

Fix this regression by clearing bits up to BITS_PER_LONG boundary.

Fixes: 85e123c27d5c ("dm mirror log: round up region bitmap size to BITS_PER_LONG")
Cc: stable@vger.kernel.org
Reported-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>