linux-stable.git/drivers/md, branch v3.10.89

dm thin metadata: delete btrees when releasing metadata snapshot

2015-09-13T16:07:59+00:00

commit 7f518ad0a212e2a6fd68630e176af1de395070a7 upstream.

The device details and mapping trees were just being decremented
before.  Now btree_del() is called to do a deep delete.

Signed-off-by: Joe Thornber 
Signed-off-by: Mike Snitzer 
Signed-off-by: Greg Kroah-Hartman

md/bitmap: return an error when bitmap superblock is corrupt.

2015-08-17T03:51:43+00:00

commit b97e92574c0bf335db1cd2ec491d8ff5cd5d0b49 upstream
    Use separate bitmaps for each nodes in the cluster

bitmap_read_sb() validates the bitmap superblock that it reads in.
If it finds an inconsistency like a bad magic number or out-of-range
version number, it prints an error and returns, but it incorrectly
returns zero, so the array is still assembled with the (invalid) bitmap.

This means it could try to use a bitmap with a new version number which
it therefore does not understand.

This bug was introduced in 3.5 and fix as part of a larger patch in 4.1.
So the patch is suitable for any -stable kernel in that range.

Fixes: 27581e5ae01f ("md/bitmap: centralise allocation of bitmap file pages.")
Signed-off-by: NeilBrown 
Reported-by: GuoQing Jiang

md/raid1: extend spinlock to protect raid1_end_read_request against inconsistencies

2015-08-17T03:51:41+00:00

commit 423f04d63cf421ea436bcc5be02543d549ce4b28 upstream.

raid1_end_read_request() assumes that the In_sync bits are consistent
with the ->degaded count.
raid1_spare_active updates the In_sync bit before the ->degraded count
and so exposes an inconsistency, as does error()
So extend the spinlock in raid1_spare_active() and error() to hide those
inconsistencies.

This should probably be part of
  Commit: 34cab6f42003 ("md/raid1: fix test for 'was read error from
  last working device'.")
as it addresses the same issue.  It fixes the same bug and should go
to -stable for same reasons.

Fixes: 76073054c95b ("md/raid1: clean up read_balance.")
Signed-off-by: NeilBrown 
Signed-off-by: Greg Kroah-Hartman

md: use kzalloc() when bitmap is disabled

2015-08-17T03:51:37+00:00

commit b6878d9e03043695dbf3fa1caa6dfc09db225b16 upstream.

In drivers/md/md.c get_bitmap_file() uses kmalloc() for creating a
mdu_bitmap_file_t called "file".

5769         file = kmalloc(sizeof(*file), GFP_NOIO);
5770         if (!file)
5771                 return -ENOMEM;

This structure is copied to user space at the end of the function.

5786         if (err == 0 &&
5787             copy_to_user(arg, file, sizeof(*file)))
5788                 err = -EFAULT

But if bitmap is disabled only the first byte of "file" is initialized
with zero, so it's possible to read some bytes (up to 4095) of kernel
space memory from user space. This is an information leak.

5775         /* bitmap disabled, zero the first byte and copy out */
5776         if (!mddev->bitmap_info.file)
5777                 file->pathname[0] = '\0';

Signed-off-by: Benjamin Randazzo 
Signed-off-by: NeilBrown 
Signed-off-by: Greg Kroah-Hartman

md/raid1: fix test for 'was read error from last working device'.

2015-08-10T19:20:30+00:00

commit 34cab6f42003cb06f48f86a86652984dec338ae9 upstream.

When we get a read error from the last working device, we don't
try to repair it, and don't fail the device.  We simple report a
read error to the caller.

However the current test for 'is this the last working device' is
wrong.
When there is only one fully working device, it assumes that a
non-faulty device is that device.  However a spare which is rebuilding
would be non-faulty but so not the only working device.

So change the test from "!Faulty" to "In_sync".  If ->degraded says
there is only one fully working device and this device is in_sync,
this must be the one.

This bug has existed since we allowed read_balance to read from
a recovering spare in v3.0

Reported-and-tested-by: Alexander Lyakas 
Fixes: 76073054c95b ("md/raid1: clean up read_balance.")
Signed-off-by: NeilBrown 
Signed-off-by: Greg Kroah-Hartman

md: fix a build warning

2015-08-03T16:29:46+00:00

commit 4e023612325a9034a542bfab79f78b1fe5ebb841 upstream.

Warning like this:

drivers/md/md.c: In function "update_array_info":
drivers/md/md.c:6394:26: warning: logical not is only applied
to the left hand side of comparison [-Wlogical-not-parentheses]
      !mddev->persistent  != info->not_persistent||

Fix it as Neil Brown said:
mddev->persistent != !info->not_persistent ||

Signed-off-by: Firo Yang 
Signed-off-by: NeilBrown 
Signed-off-by: Greg Kroah-Hartman

dm btree: silence lockdep lock inversion in dm_btree_del()

2015-08-03T16:29:45+00:00

commit 1c7518794a3647eb345d59ee52844e8a40405198 upstream.

Allocate memory using GFP_NOIO when deleting a btree.  dm_btree_del()
can be called via an ioctl and we don't want to recurse into the FS or
block layer.

Signed-off-by: Joe Thornber 
Signed-off-by: Mike Snitzer 
Signed-off-by: Greg Kroah-Hartman

dm btree remove: fix bug in redistribute3

2015-08-03T16:29:45+00:00

commit 4c7e309340ff85072e96f529582d159002c36734 upstream.

redistribute3() shares entries out across 3 nodes.  Some entries were
being moved the wrong way, breaking the ordering.  This manifested as a
BUG() in dm-btree-remove.c:shift() when entries were removed from the
btree.

For additional context see:
https://www.redhat.com/archives/dm-devel/2015-May/msg00113.html

Signed-off-by: Dennis Yang 
Signed-off-by: Joe Thornber 
Signed-off-by: Mike Snitzer 
Signed-off-by: Greg Kroah-Hartman

md/raid5: don't record new size if resize_stripes fails.

2015-06-06T06:19:59+00:00

commit 6e9eac2dcee5e19f125967dd2be3e36558c42fff upstream.

If any memory allocation in resize_stripes fails we will return
-ENOMEM, but in some cases we update conf->pool_size anyway.

This means that if we try again, the allocations will be assumed
to be larger than they are, and badness results.

So only update pool_size if there is no error.

This bug was introduced in 2.6.17 and the patch is suitable for
-stable.

Fixes: ad01c9e3752f ("[PATCH] md: Allow stripes to be expanded in preparation for expanding an array")
Signed-off-by: NeilBrown 
Signed-off-by: Greg Kroah-Hartman

dm: hold suspend_lock while suspending device during device deletion

2015-04-13T12:02:12+00:00

commit ab7c7bb6f4ab95dbca96fcfc4463cd69843e3e24 upstream.

__dm_destroy() must take the suspend_lock so that its presuspend and
postsuspend calls do not race with an internal suspend.

Signed-off-by: Mikulas Patocka 
Signed-off-by: Mike Snitzer 
Signed-off-by: Greg Kroah-Hartman