linux-stable.git/drivers/md/raid5.c, branch v3.13 Linux kernel stable tree md/raid5: fix a recently broken BUG_ON(). 2014-01-14T05:44:07+00:00 NeilBrown neilb@suse.de 2014-01-14T04:16:10+00:00 5af9bef72c074dbe946da8b74eabd79cd5a9ff19 commit 6d183de4077191d1201283a9035ce57a9b05254d md/raid5: fix newly-broken locking in get_active_stripe. simplified a BUG_ON, but removed too much so now it sometimes fires when it shouldn't. When the STRIPE_EXPANDING flag is set, the stripe_head might be on a special list while multiple stripe_heads are collected, or it might not be on any list, even a 'free' list when the refcount is zero. As long as STRIPE_EXPANDING is set, it will be found and added back to a list eventually. So both of the BUG_ONs which test for the ->lru being empty or not need to avoid the case where STRIPE_EXPANDING is set. The patch which broke this was marked for -stable, so this patch needs to be applied to any branch that received 6d183de4 Fixes: 6d183de4077191d1201283a9035ce57a9b05254d Cc: stable@vger.kernel.org (any release to which above was applied) Signed-off-by: NeilBrown <neilb@suse.de> 
commit 6d183de4077191d1201283a9035ce57a9b05254d
    md/raid5: fix newly-broken locking in get_active_stripe.

simplified a BUG_ON, but removed too much so now it sometimes fires
when it shouldn't.

When the STRIPE_EXPANDING flag is set, the stripe_head might be on a
special list while multiple stripe_heads are collected, or it might
not be on any list, even a 'free' list when the refcount is zero.  As
long as STRIPE_EXPANDING is set, it will be found and added back to a
list eventually.

So both of the BUG_ONs which test for the ->lru being empty or not
need to avoid the case where STRIPE_EXPANDING is set.

The patch which broke this was marked for -stable, so this patch needs
to be applied to any branch that received 6d183de4

Fixes: 6d183de4077191d1201283a9035ce57a9b05254d
Cc: stable@vger.kernel.org (any release to which above was applied)
Signed-off-by: NeilBrown <neilb@suse.de>
md/raid5: Fix possible confusion when multiple write errors occur. 2014-01-14T05:44:07+00:00 NeilBrown neilb@suse.de 2014-01-06T02:19:42+00:00 1cc03eb93245e63b0b7a7832165efdc52e25b4e6 commit 5d8c71f9e5fbdd95650be00294d238e27a363b5c md: raid5 crash during degradation Fixed a crash in an overly simplistic way which could leave R5_WriteError or R5_MadeGood set in the stripe cache for devices for which it is no longer relevant. When those devices are removed and spares added the flags are still set and can cause incorrect behaviour. commit 14a75d3e07c784c004b4b44b34af996b8e4ac453 md/raid5: preferentially read from replacement device if possible. Fixed the same bug if a more effective way, so we can now revert the original commit. Reported-and-tested-by: Alexander Lyakas <alex.bolshoy@gmail.com> Cc: stable@vger.kernel.org (3.2+ - 3.2 will need a different fix though) Fixes: 5d8c71f9e5fbdd95650be00294d238e27a363b5c Signed-off-by: NeilBrown <neilb@suse.de> 
commit 5d8c71f9e5fbdd95650be00294d238e27a363b5c
    md: raid5 crash during degradation

Fixed a crash in an overly simplistic way which could leave
R5_WriteError or R5_MadeGood set in the stripe cache for devices
for which it is no longer relevant.
When those devices are removed and spares added the flags are still
set and can cause incorrect behaviour.

commit 14a75d3e07c784c004b4b44b34af996b8e4ac453
    md/raid5: preferentially read from replacement device if possible.

Fixed the same bug if a more effective way, so we can now revert
the original commit.

Reported-and-tested-by: Alexander Lyakas <alex.bolshoy@gmail.com>
Cc: stable@vger.kernel.org (3.2+ - 3.2 will need a different fix though)
Fixes: 5d8c71f9e5fbdd95650be00294d238e27a363b5c
Signed-off-by: NeilBrown <neilb@suse.de>
md/raid5: fix newly-broken locking in get_active_stripe. 2013-11-28T00:00:15+00:00 NeilBrown neilb@suse.de 2013-11-27T23:55:27+00:00 6d183de4077191d1201283a9035ce57a9b05254d commit 566c09c53455d7c4f1 raid5: relieve lock contention in get_active_stripe() modified the locking in get_active_stripe() reducing the range protected by the (highly contended) device_lock. Unfortunately it reduced the range too much opening up some races. One race can occur if get_priority_stripe runs between the test on sh->count and device_lock being taken. This will mean that sh->lru is not empty while get_active_stripe thinks ->count is zero resulting in a 'BUG' firing. Another race happens if __release_stripe is called immediately after sh->count is tested and found to be non-zero. If STRIPE_HANDLE is not set, get_active_stripe should increment ->active_stripes when it increments ->count from 0, but as it didn't think it was 0, it doesn't. Extending device_lock to cover the test on sh->count close these races. While we are here, fix the two BUG tests: -If count is zero, then lru really must not be empty, or we've lock the stripe_head somehow - no other tests are relevant. -STRIPE_ON_RELEASE_LIST is completely independent of ->lru so testing it is pointless. Reported-and-tested-by: Brassow Jonathan <jbrassow@redhat.com> Reviewed-by: Shaohua Li <shli@kernel.org> Fixes: 566c09c53455d7c4f1 Signed-off-by: NeilBrown <neilb@suse.de> 
commit 566c09c53455d7c4f1 raid5: relieve lock contention in get_active_stripe()

modified the locking in get_active_stripe() reducing the range
protected by the (highly contended) device_lock.
Unfortunately it reduced the range too much opening up some races.

One race can occur if get_priority_stripe runs between the
test on sh->count and device_lock being taken.
This will mean that sh->lru is not empty while get_active_stripe
thinks ->count is zero resulting in a 'BUG' firing.

Another race happens if __release_stripe is called immediately
after sh->count is tested and found to be non-zero.  If STRIPE_HANDLE
is not set, get_active_stripe should increment ->active_stripes
when it increments ->count from 0, but as it didn't think it was 0,
it doesn't.

Extending device_lock to cover the test on sh->count close these
races.

While we are here, fix the two BUG tests:
 -If count is zero, then lru really must not be empty, or we've
  lock the stripe_head somehow - no other tests are relevant.
 -STRIPE_ON_RELEASE_LIST is completely independent of ->lru so
  testing it is pointless.

Reported-and-tested-by: Brassow Jonathan <jbrassow@redhat.com>
Reviewed-by: Shaohua Li <shli@kernel.org>
Fixes: 566c09c53455d7c4f1
Signed-off-by: NeilBrown <neilb@suse.de>
md/raid5: fix new memory-reference bug in alloc_thread_groups. 2013-11-28T00:00:04+00:00 NeilBrown neilb@suse.de 2013-11-25T00:12:43+00:00 0c775d5208284700de423e6746259da54a42e1f5 In alloc_thread_groups, worker_groups is a pointer to an array, not an array of pointers. So worker_groups[i] is wrong. It should be &(*worker_groups)[i] Found-by: coverity Fixes: 60aaf9338545 Reported-by: Ben Hutchings <bhutchings@solarflare.com> Cc: majianpeng <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de> 
In alloc_thread_groups, worker_groups is a pointer to an array,
not an array of pointers.
So
   worker_groups[i]
is wrong.  It should be
   &(*worker_groups)[i]

Found-by: coverity
Fixes: 60aaf9338545
Reported-by: Ben Hutchings <bhutchings@solarflare.com>
Cc: majianpeng <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Merge tag 'md/3.13' of git://neil.brown.name/md 2013-11-20T21:05:25+00:00 Linus Torvalds torvalds@linux-foundation.org 2013-11-20T21:05:25+00:00 6d6e352c80f22c446d933ca8103e02bac1f09129 Pull md update from Neil Brown: "Mostly optimisations and obscure bug fixes. - raid5 gets less lock contention - raid1 gets less contention between normal-io and resync-io during resync" * tag 'md/3.13' of git://neil.brown.name/md: md/raid5: Use conf->device_lock protect changing of multi-thread resources. md/raid5: Before freeing old multi-thread worker, it should flush them. md/raid5: For stripe with R5_ReadNoMerge, we replace REQ_FLUSH with REQ_NOMERGE. UAPI: include <asm/byteorder.h> in linux/raid/md_p.h raid1: Rewrite the implementation of iobarrier. raid1: Add some macros to make code clearly. raid1: Replace raise_barrier/lower_barrier with freeze_array/unfreeze_array when reconfiguring the array. raid1: Add a field array_frozen to indicate whether raid in freeze state. md: Convert use of typedef ctl_table to struct ctl_table md/raid5: avoid deadlock when raid5 array has unack badblocks during md_stop_writes. md: use MD_RECOVERY_INTR instead of kthread_should_stop in resync thread. md: fix some places where mddev_lock return value is not checked. raid5: Retry R5_ReadNoMerge flag when hit a read error. raid5: relieve lock contention in get_active_stripe() raid5: relieve lock contention in get_active_stripe() wait: add wait_event_cmd() md/raid5.c: add proper locking to error path of raid5_start_reshape. md: fix calculation of stacking limits on level change. raid5: Use slow_path to release stripe when mddev->thread is null 
Pull md update from Neil Brown:
 "Mostly optimisations and obscure bug fixes.
   - raid5 gets less lock contention
   - raid1 gets less contention between normal-io and resync-io during
     resync"

* tag 'md/3.13' of git://neil.brown.name/md:
  md/raid5: Use conf->device_lock protect changing of multi-thread resources.
  md/raid5: Before freeing old multi-thread worker, it should flush them.
  md/raid5: For stripe with R5_ReadNoMerge, we replace REQ_FLUSH with REQ_NOMERGE.
  UAPI: include <asm/byteorder.h> in linux/raid/md_p.h
  raid1: Rewrite the implementation of iobarrier.
  raid1: Add some macros to make code clearly.
  raid1: Replace raise_barrier/lower_barrier with freeze_array/unfreeze_array when reconfiguring the array.
  raid1: Add a field array_frozen to indicate whether raid in freeze state.
  md: Convert use of typedef ctl_table to struct ctl_table
  md/raid5: avoid deadlock when raid5 array has unack badblocks during md_stop_writes.
  md: use MD_RECOVERY_INTR instead of kthread_should_stop in resync thread.
  md: fix some places where mddev_lock return value is not checked.
  raid5: Retry R5_ReadNoMerge flag when hit a read error.
  raid5: relieve lock contention in get_active_stripe()
  raid5: relieve lock contention in get_active_stripe()
  wait: add wait_event_cmd()
  md/raid5.c: add proper locking to error path of raid5_start_reshape.
  md: fix calculation of stacking limits on level change.
  raid5: Use slow_path to release stripe when mddev->thread is null
md/raid5: Use conf->device_lock protect changing of multi-thread resources. 2013-11-19T04:19:18+00:00 majianpeng majianpeng@gmail.com 2013-11-14T04:16:20+00:00 60aaf933854511630e16be4efe0f96485e132de4 When we change group_thread_cnt from sysfs entry, it can OOPS. The kernel messages are: [ 135.299021] BUG: unable to handle kernel NULL pointer dereference at (null) [ 135.299073] IP: [<ffffffff815188ab>] handle_active_stripes+0x32b/0x440 [ 135.299107] PGD 0 [ 135.299122] Oops: 0000 [#1] SMP [ 135.299144] Modules linked in: netconsole e1000e ptp pps_core [ 135.299188] CPU: 3 PID: 2225 Comm: md0_raid5 Not tainted 3.12.0+ #24 [ 135.299214] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080015 11/09/2011 [ 135.299255] task: ffff8800b9638f80 ti: ffff8800b77a4000 task.ti: ffff8800b77a4000 [ 135.299283] RIP: 0010:[<ffffffff815188ab>] [<ffffffff815188ab>] handle_active_stripes+0x32b/0x440 [ 135.299323] RSP: 0018:ffff8800b77a5c48 EFLAGS: 00010002 [ 135.299344] RAX: ffff880037bb5c70 RBX: 0000000000000000 RCX: 0000000000000008 [ 135.299371] RDX: ffff880037bb5cb8 RSI: 0000000000000001 RDI: ffff880037bb5c00 [ 135.299398] RBP: ffff8800b77a5d08 R08: 0000000000000001 R09: 0000000000000000 [ 135.299425] R10: ffff8800b77a5c98 R11: 00000000ffffffff R12: ffff880037bb5c00 [ 135.299452] R13: 0000000000000000 R14: 0000000000000000 R15: ffff880037bb5c70 [ 135.299479] FS: 0000000000000000(0000) GS:ffff88013fd80000(0000) knlGS:0000000000000000 [ 135.299510] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 135.299532] CR2: 0000000000000000 CR3: 0000000001c0b000 CR4: 00000000000407e0 [ 135.299559] Stack: [ 135.299570] ffff8800b77a5c88 ffffffff8107383e ffff8800b77a5c88 ffff880037a64300 [ 135.299611] 000000000000ec08 ffff880037bb5cb8 ffff8800b77a5c98 ffffffffffffffd8 [ 135.299654] 000000000000ec08 ffff880037bb5c60 ffff8800b77a5c98 ffff8800b77a5c98 [ 135.299696] Call Trace: [ 135.299711] [<ffffffff8107383e>] ? __wake_up+0x4e/0x70 [ 135.299733] [<ffffffff81518f88>] raid5d+0x4c8/0x680 [ 135.299756] [<ffffffff817174ed>] ? schedule_timeout+0x15d/0x1f0 [ 135.299781] [<ffffffff81524c9f>] md_thread+0x11f/0x170 [ 135.299804] [<ffffffff81069cd0>] ? wake_up_bit+0x40/0x40 [ 135.299826] [<ffffffff81524b80>] ? md_rdev_init+0x110/0x110 [ 135.299850] [<ffffffff81069656>] kthread+0xc6/0xd0 [ 135.299871] [<ffffffff81069590>] ? kthread_freezable_should_stop+0x70/0x70 [ 135.299899] [<ffffffff81722ffc>] ret_from_fork+0x7c/0xb0 [ 135.299923] [<ffffffff81069590>] ? kthread_freezable_should_stop+0x70/0x70 [ 135.299951] Code: ff ff ff 0f 84 d7 fe ff ff e9 5c fe ff ff 66 90 41 8b b4 24 d8 01 00 00 45 31 ed 85 f6 0f 8e 7b fd ff ff 49 8b 9c 24 d0 01 00 00 <48> 3b 1b 49 89 dd 0f 85 67 fd ff ff 48 8d 43 28 31 d2 eb 17 90 [ 135.300005] RIP [<ffffffff815188ab>] handle_active_stripes+0x32b/0x440 [ 135.300005] RSP <ffff8800b77a5c48> [ 135.300005] CR2: 0000000000000000 [ 135.300005] ---[ end trace 504854e5bb7562ed ]--- [ 135.300005] Kernel panic - not syncing: Fatal exception This is because raid5d() can be running when the multi-thread resources are changed via system. We see need to provide locking. mddev->device_lock is suitable, but we cannot simple call alloc_thread_groups under this lock as we cannot allocate memory while holding a spinlock. So change alloc_thread_groups() to allocate and return the data structures, then raid5_store_group_thread_cnt() can take the lock while updating the pointers to the data structures. This fixes a bug introduced in 3.12 and so is suitable for the 3.12.x stable series. Fixes: b721420e8719131896b009b11edbbd27 Cc: stable@vger.kernel.org (3.12) Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Shaohua Li <shli@kernel.org> 
When we change group_thread_cnt from sysfs entry, it can OOPS.

The kernel messages are:
[  135.299021] BUG: unable to handle kernel NULL pointer dereference at           (null)
[  135.299073] IP: [<ffffffff815188ab>] handle_active_stripes+0x32b/0x440
[  135.299107] PGD 0
[  135.299122] Oops: 0000 [#1] SMP
[  135.299144] Modules linked in: netconsole e1000e ptp pps_core
[  135.299188] CPU: 3 PID: 2225 Comm: md0_raid5 Not tainted 3.12.0+ #24
[  135.299214] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080015  11/09/2011
[  135.299255] task: ffff8800b9638f80 ti: ffff8800b77a4000 task.ti: ffff8800b77a4000
[  135.299283] RIP: 0010:[<ffffffff815188ab>]  [<ffffffff815188ab>] handle_active_stripes+0x32b/0x440
[  135.299323] RSP: 0018:ffff8800b77a5c48  EFLAGS: 00010002
[  135.299344] RAX: ffff880037bb5c70 RBX: 0000000000000000 RCX: 0000000000000008
[  135.299371] RDX: ffff880037bb5cb8 RSI: 0000000000000001 RDI: ffff880037bb5c00
[  135.299398] RBP: ffff8800b77a5d08 R08: 0000000000000001 R09: 0000000000000000
[  135.299425] R10: ffff8800b77a5c98 R11: 00000000ffffffff R12: ffff880037bb5c00
[  135.299452] R13: 0000000000000000 R14: 0000000000000000 R15: ffff880037bb5c70
[  135.299479] FS:  0000000000000000(0000) GS:ffff88013fd80000(0000) knlGS:0000000000000000
[  135.299510] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  135.299532] CR2: 0000000000000000 CR3: 0000000001c0b000 CR4: 00000000000407e0
[  135.299559] Stack:
[  135.299570]  ffff8800b77a5c88 ffffffff8107383e ffff8800b77a5c88 ffff880037a64300
[  135.299611]  000000000000ec08 ffff880037bb5cb8 ffff8800b77a5c98 ffffffffffffffd8
[  135.299654]  000000000000ec08 ffff880037bb5c60 ffff8800b77a5c98 ffff8800b77a5c98
[  135.299696] Call Trace:
[  135.299711]  [<ffffffff8107383e>] ? __wake_up+0x4e/0x70
[  135.299733]  [<ffffffff81518f88>] raid5d+0x4c8/0x680
[  135.299756]  [<ffffffff817174ed>] ? schedule_timeout+0x15d/0x1f0
[  135.299781]  [<ffffffff81524c9f>] md_thread+0x11f/0x170
[  135.299804]  [<ffffffff81069cd0>] ? wake_up_bit+0x40/0x40
[  135.299826]  [<ffffffff81524b80>] ? md_rdev_init+0x110/0x110
[  135.299850]  [<ffffffff81069656>] kthread+0xc6/0xd0
[  135.299871]  [<ffffffff81069590>] ? kthread_freezable_should_stop+0x70/0x70
[  135.299899]  [<ffffffff81722ffc>] ret_from_fork+0x7c/0xb0
[  135.299923]  [<ffffffff81069590>] ? kthread_freezable_should_stop+0x70/0x70
[  135.299951] Code: ff ff ff 0f 84 d7 fe ff ff e9 5c fe ff ff 66 90 41 8b b4 24 d8 01 00 00 45 31 ed 85 f6 0f 8e 7b fd ff ff 49 8b 9c 24 d0 01 00 00 <48> 3b 1b 49 89 dd 0f 85 67 fd ff ff 48 8d 43 28 31 d2 eb 17 90
[  135.300005] RIP  [<ffffffff815188ab>] handle_active_stripes+0x32b/0x440
[  135.300005]  RSP <ffff8800b77a5c48>
[  135.300005] CR2: 0000000000000000
[  135.300005] ---[ end trace 504854e5bb7562ed ]---
[  135.300005] Kernel panic - not syncing: Fatal exception

This is because raid5d() can be running when the multi-thread
resources are changed via system. We see need to provide locking.

mddev->device_lock is suitable, but we cannot simple call
alloc_thread_groups under this lock as we cannot allocate memory
while holding a spinlock.
So change alloc_thread_groups() to allocate and return the data
structures, then raid5_store_group_thread_cnt() can take the lock
while updating the pointers to the data structures.

This fixes a bug introduced in 3.12 and so is suitable for the 3.12.x
stable series.

Fixes: b721420e8719131896b009b11edbbd27
Cc: stable@vger.kernel.org (3.12)
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Shaohua Li <shli@kernel.org>
md/raid5: Before freeing old multi-thread worker, it should flush them. 2013-11-19T04:19:18+00:00 majianpeng majianpeng@gmail.com 2013-11-14T04:16:19+00:00 d206dcfa9809ec3409483e93b5e362f801fa0c27 When changing group_thread_cnt from sysfs entry, the kernel can oops. The kernel messages are: [ 740.961389] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 740.961444] IP: [<ffffffff81062570>] process_one_work+0x30/0x500 [ 740.961476] PGD b9013067 PUD b651e067 PMD 0 [ 740.961503] Oops: 0000 [#1] SMP [ 740.961525] Modules linked in: netconsole e1000e ptp pps_core [ 740.961577] CPU: 0 PID: 3683 Comm: kworker/u8:5 Not tainted 3.12.0+ #23 [ 740.961602] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080015 11/09/2011 [ 740.961646] task: ffff88013abe0000 ti: ffff88013a246000 task.ti: ffff88013a246000 [ 740.961673] RIP: 0010:[<ffffffff81062570>] [<ffffffff81062570>] process_one_work+0x30/0x500 [ 740.961708] RSP: 0018:ffff88013a247e08 EFLAGS: 00010086 [ 740.961730] RAX: ffff8800b912b400 RBX: ffff88013a61e680 RCX: ffff8800b912b400 [ 740.961757] RDX: ffff8800b912b600 RSI: ffff8800b912b600 RDI: ffff88013a61e680 [ 740.961782] RBP: ffff88013a247e48 R08: ffff88013a246000 R09: 000000000002c09d [ 740.961808] R10: 000000000000010f R11: 0000000000000000 R12: ffff88013b00cc00 [ 740.961833] R13: 0000000000000000 R14: ffff88013b00cf80 R15: ffff88013a61e6b0 [ 740.961861] FS: 0000000000000000(0000) GS:ffff88013fc00000(0000) knlGS:0000000000000000 [ 740.961893] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 740.962001] CR2: 00000000000000b8 CR3: 00000000b24fe000 CR4: 00000000000407f0 [ 740.962001] Stack: [ 740.962001] 0000000000000008 ffff8800b912b600 ffff88013b00cc00 ffff88013a61e680 [ 740.962001] ffff88013b00cc00 ffff88013b00cc18 ffff88013b00cf80 ffff88013a61e6b0 [ 740.962001] ffff88013a247eb8 ffffffff810639c6 0000000000012a80 ffff88013a247fd8 [ 740.962001] Call Trace: [ 740.962001] [<ffffffff810639c6>] worker_thread+0x206/0x3f0 [ 740.962001] [<ffffffff810637c0>] ? manage_workers+0x2c0/0x2c0 [ 740.962001] [<ffffffff81069656>] kthread+0xc6/0xd0 [ 740.962001] [<ffffffff81069590>] ? kthread_freezable_should_stop+0x70/0x70 [ 740.962001] [<ffffffff81722ffc>] ret_from_fork+0x7c/0xb0 [ 740.962001] [<ffffffff81069590>] ? kthread_freezable_should_stop+0x70/0x70 [ 740.962001] Code: 89 e5 41 57 41 56 41 55 45 31 ed 41 54 53 48 89 fb 48 83 ec 18 48 8b 06 4c 8b 67 48 48 89 c1 30 c9 a8 04 4c 0f 45 e9 80 7f 58 00 <49> 8b 45 08 44 8b b0 00 01 00 00 78 0c 41 f6 44 24 10 04 0f 84 [ 740.962001] RIP [<ffffffff81062570>] process_one_work+0x30/0x500 [ 740.962001] RSP <ffff88013a247e08> [ 740.962001] CR2: 0000000000000008 [ 740.962001] ---[ end trace 39181460000748de ]--- [ 740.962001] Kernel panic - not syncing: Fatal exception This can happen if there are some stripes left, fewer than MAX_STRIPE_BATCH. A worker is queued to handle them. But before calling raid5_do_work, raid5d handles those stripes making conf->active_stripe = 0. So mddev_suspend() can return. We might then free old worker resources before the queued raid5_do_work() handled them. When it runs, it crashes. raid5d() raid5_store_group_thread_cnt() queue_work mddev_suspend() handle_strips active_stripe=0 free(old worker resources) process_one_work raid5_do_work To avoid this, we should only flush the worker resources before freeing them. This fixes a bug introduced in 3.12 so is suitable for the 3.12.x stable series. Cc: stable@vger.kernel.org (3.12) Fixes: b721420e8719131896b009b11edbbd27 Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Shaohua Li <shli@kernel.org> 
When changing group_thread_cnt from sysfs entry, the kernel can oops.

The kernel messages are:
[  740.961389] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[  740.961444] IP: [<ffffffff81062570>] process_one_work+0x30/0x500
[  740.961476] PGD b9013067 PUD b651e067 PMD 0
[  740.961503] Oops: 0000 [#1] SMP
[  740.961525] Modules linked in: netconsole e1000e ptp pps_core
[  740.961577] CPU: 0 PID: 3683 Comm: kworker/u8:5 Not tainted 3.12.0+ #23
[  740.961602] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080015  11/09/2011
[  740.961646] task: ffff88013abe0000 ti: ffff88013a246000 task.ti: ffff88013a246000
[  740.961673] RIP: 0010:[<ffffffff81062570>]  [<ffffffff81062570>] process_one_work+0x30/0x500
[  740.961708] RSP: 0018:ffff88013a247e08  EFLAGS: 00010086
[  740.961730] RAX: ffff8800b912b400 RBX: ffff88013a61e680 RCX: ffff8800b912b400
[  740.961757] RDX: ffff8800b912b600 RSI: ffff8800b912b600 RDI: ffff88013a61e680
[  740.961782] RBP: ffff88013a247e48 R08: ffff88013a246000 R09: 000000000002c09d
[  740.961808] R10: 000000000000010f R11: 0000000000000000 R12: ffff88013b00cc00
[  740.961833] R13: 0000000000000000 R14: ffff88013b00cf80 R15: ffff88013a61e6b0
[  740.961861] FS:  0000000000000000(0000) GS:ffff88013fc00000(0000) knlGS:0000000000000000
[  740.961893] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  740.962001] CR2: 00000000000000b8 CR3: 00000000b24fe000 CR4: 00000000000407f0
[  740.962001] Stack:
[  740.962001]  0000000000000008 ffff8800b912b600 ffff88013b00cc00 ffff88013a61e680
[  740.962001]  ffff88013b00cc00 ffff88013b00cc18 ffff88013b00cf80 ffff88013a61e6b0
[  740.962001]  ffff88013a247eb8 ffffffff810639c6 0000000000012a80 ffff88013a247fd8
[  740.962001] Call Trace:
[  740.962001]  [<ffffffff810639c6>] worker_thread+0x206/0x3f0
[  740.962001]  [<ffffffff810637c0>] ? manage_workers+0x2c0/0x2c0
[  740.962001]  [<ffffffff81069656>] kthread+0xc6/0xd0
[  740.962001]  [<ffffffff81069590>] ? kthread_freezable_should_stop+0x70/0x70
[  740.962001]  [<ffffffff81722ffc>] ret_from_fork+0x7c/0xb0
[  740.962001]  [<ffffffff81069590>] ? kthread_freezable_should_stop+0x70/0x70
[  740.962001] Code: 89 e5 41 57 41 56 41 55 45 31 ed 41 54 53 48 89 fb 48 83 ec 18 48 8b 06 4c 8b 67 48 48 89 c1 30 c9 a8 04 4c 0f 45 e9 80 7f 58 00 <49> 8b 45 08 44 8b b0 00 01 00 00 78 0c 41 f6 44 24 10 04 0f 84
[  740.962001] RIP  [<ffffffff81062570>] process_one_work+0x30/0x500
[  740.962001]  RSP <ffff88013a247e08>
[  740.962001] CR2: 0000000000000008
[  740.962001] ---[ end trace 39181460000748de ]---
[  740.962001] Kernel panic - not syncing: Fatal exception

This can happen if there are some stripes left, fewer than MAX_STRIPE_BATCH.
A worker is queued to handle them.
But before calling raid5_do_work, raid5d handles those
stripes making conf->active_stripe = 0.
So mddev_suspend() can return.
We might then free old worker resources before the queued
raid5_do_work() handled them.  When it runs, it crashes.

	raid5d()		raid5_store_group_thread_cnt()
	queue_work		mddev_suspend()
				handle_strips
				active_stripe=0
				free(old worker resources)
	process_one_work
	raid5_do_work

To avoid this, we should only flush the worker resources before freeing them.

This fixes a bug introduced in 3.12 so is suitable for the 3.12.x
stable series.

Cc: stable@vger.kernel.org (3.12)
Fixes: b721420e8719131896b009b11edbbd27
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Shaohua Li <shli@kernel.org>
md/raid5: For stripe with R5_ReadNoMerge, we replace REQ_FLUSH with REQ_NOMERGE. 2013-11-19T04:19:18+00:00 majianpeng majianpeng@gmail.com 2013-11-14T04:16:19+00:00 e59aa23f4c0c61b4baa5d535a2071d6666e83502 For R5_ReadNoMerge,it mean this bio can't merge with other bios or request.It used REQ_FLUSH to achieve this. But REQ_NOMERGE can do the same work. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de> 
For R5_ReadNoMerge,it mean this bio can't merge with other bios or
request.It used REQ_FLUSH to achieve this. But REQ_NOMERGE can do the
same work.

Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
md: use MD_RECOVERY_INTR instead of kthread_should_stop in resync thread. 2013-11-19T04:19:17+00:00 NeilBrown neilb@suse.de 2013-11-19T01:02:01+00:00 c91abf5a3546a4ff0838d2905f4d7eae2795f724 We currently use kthread_should_stop() in various places in the sync/reshape code to abort early. However some places set MD_RECOVERY_INTR but don't immediately call md_reap_sync_thread() (and we will shortly get another one). When this happens we are relying on md_check_recovery() to reap the thread and that only happen when it finishes normally. So MD_RECOVERY_INTR must lead to a normal finish without the kthread_should_stop() test. So replace all relevant tests, and be more careful when the thread is interrupted not to acknowledge that latest step in a reshape as it may not be fully committed yet. Also add a test on MD_RECOVERY_INTR in the 'is_mddev_idle' loop so we don't wait have to wait for the speed to drop before we can abort. Signed-off-by: NeilBrown <neilb@suse.de> 
We currently use kthread_should_stop() in various places in the
sync/reshape code to abort early.
However some places set MD_RECOVERY_INTR but don't immediately call
md_reap_sync_thread() (and we will shortly get another one).
When this happens we are relying on md_check_recovery() to reap the
thread and that only happen when it finishes normally.
So MD_RECOVERY_INTR must lead to a normal finish without the
kthread_should_stop() test.

So replace all relevant tests, and be more careful when the thread is
interrupted not to acknowledge that latest step in a reshape as it may
not be fully committed yet.

Also add a test on MD_RECOVERY_INTR in the 'is_mddev_idle' loop
so we don't wait have to wait for the speed to drop before we can abort.

Signed-off-by: NeilBrown <neilb@suse.de>
raid5: Retry R5_ReadNoMerge flag when hit a read error. 2013-11-19T04:18:24+00:00 Bian Yu bianyu@kedacom.com 2013-11-14T04:16:17+00:00 edfa1f651e93261eecb034d02284ece103dd691a Because of block layer merge, one bio fails will cause other bios which belongs to the same request fails, so raid5_end_read_request will record all these bios as badblocks. If retry request with R5_ReadNoMerge flag to avoid bios merge, badblocks can only record sector which is bad exactly. test: hdparm --yes-i-know-what-i-am-doing --make-bad-sector 300000 /dev/sdb mdadm -C /dev/md0 -l5 -n3 /dev/sd[bcd] --assume-clean mdadm /dev/md0 -f /dev/sdd mdadm /dev/md0 -r /dev/sdd mdadm --zero-superblock /dev/sdd mdadm /dev/md0 -a /dev/sdd 1. Without this patch: cat /sys/block/md0/md/rd*/bad_blocks 299776 256 299776 256 2. With this patch: cat /sys/block/md0/md/rd*/bad_blocks 300000 8 300000 8 Signed-off-by: Bian Yu <bianyu@kedacom.com> Signed-off-by: NeilBrown <neilb@suse.de> 
Because of block layer merge, one bio fails will cause other bios
which belongs to the same request fails, so raid5_end_read_request
will record all these bios as badblocks.
If retry request with R5_ReadNoMerge flag to avoid bios merge,
badblocks can only record sector which is bad exactly.

test:
hdparm --yes-i-know-what-i-am-doing --make-bad-sector 300000 /dev/sdb
mdadm -C /dev/md0 -l5 -n3 /dev/sd[bcd] --assume-clean
mdadm /dev/md0 -f /dev/sdd
mdadm /dev/md0 -r /dev/sdd
mdadm --zero-superblock /dev/sdd
mdadm /dev/md0 -a /dev/sdd

1. Without this patch:
cat /sys/block/md0/md/rd*/bad_blocks
299776 256
299776 256

2. With this patch:
cat /sys/block/md0/md/rd*/bad_blocks
300000 8
300000 8

Signed-off-by: Bian Yu <bianyu@kedacom.com>
Signed-off-by: NeilBrown <neilb@suse.de>