linux-stable.git/drivers/md/raid10.c, branch v6.3

block: remove bio_set_op_attrs

2022-12-07T16:43:12+00:00

This macro is obsolete, so replace the last few uses with open coded
bi_opf assignments.

Signed-off-by: Christoph Hellwig 
Acked-by: Coly Li >
Reviewed-by: Johannes Thumshirn 
Reviewed-by: Bart Van Assche 
Link: https://lore.kernel.org/r/20221206144057.720846-1-hch@lst.de
Signed-off-by: Jens Axboe

md/raid0, raid10: Don't set discard sectors for request queue

2022-11-14T18:15:34+00:00

It should use disk_stack_limits to get a proper max_discard_sectors
rather than setting a value by stack drivers.

And there is a bug. If all member disks are rotational devices,
raid0/raid10 set max_discard_sectors. So the member devices are
not ssd/nvme, but raid0/raid10 export the wrong value. It reports
warning messages in function __blkdev_issue_discard when mkfs.xfs
like this:

[ 4616.022599] ------------[ cut here ]------------
[ 4616.027779] WARNING: CPU: 4 PID: 99634 at block/blk-lib.c:50 __blkdev_issue_discard+0x16a/0x1a0
[ 4616.140663] RIP: 0010:__blkdev_issue_discard+0x16a/0x1a0
[ 4616.146601] Code: 24 4c 89 20 31 c0 e9 fe fe ff ff c1 e8 09 8d 48 ff 4c 89 f0 4c 09 e8 48 85 c1 0f 84 55 ff ff ff b8 ea ff ff ff e9 df fe ff ff <0f> 0b 48 8d 74 24 08 e8 ea d6 00 00 48 c7 c6 20 1e 89 ab 48 c7 c7
[ 4616.167567] RSP: 0018:ffffaab88cbffca8 EFLAGS: 00010246
[ 4616.173406] RAX: ffff9ba1f9e44678 RBX: 0000000000000000 RCX: ffff9ba1c9792080
[ 4616.181376] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9ba1c9792080
[ 4616.189345] RBP: 0000000000000cc0 R08: ffffaab88cbffd10 R09: 0000000000000000
[ 4616.197317] R10: 0000000000000012 R11: 0000000000000000 R12: 0000000000000000
[ 4616.205288] R13: 0000000000400000 R14: 0000000000000cc0 R15: ffff9ba1c9792080
[ 4616.213259] FS:  00007f9a5534e980(0000) GS:ffff9ba1b7c80000(0000) knlGS:0000000000000000
[ 4616.222298] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4616.228719] CR2: 000055a390a4c518 CR3: 0000000123e40006 CR4: 00000000001706e0
[ 4616.236689] Call Trace:
[ 4616.239428]  blkdev_issue_discard+0x52/0xb0
[ 4616.244108]  blkdev_common_ioctl+0x43c/0xa00
[ 4616.248883]  blkdev_ioctl+0x116/0x280
[ 4616.252977]  __x64_sys_ioctl+0x8a/0xc0
[ 4616.257163]  do_syscall_64+0x5c/0x90
[ 4616.261164]  ? handle_mm_fault+0xc5/0x2a0
[ 4616.265652]  ? do_user_addr_fault+0x1d8/0x690
[ 4616.270527]  ? do_syscall_64+0x69/0x90
[ 4616.274717]  ? exc_page_fault+0x62/0x150
[ 4616.279097]  entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 4616.284748] RIP: 0033:0x7f9a55398c6b

Signed-off-by: Xiao Ni 
Reported-by: Yi Zhang 
Reviewed-by: Ming Lei 
Signed-off-by: Song Liu

Merge tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux

2022-10-07T16:19:14+00:00

Pull block updates from Jens Axboe:

 - NVMe pull requests via Christoph:
      - handle number of queue changes in the TCP and RDMA drivers
        (Daniel Wagner)
      - allow changing the number of queues in nvmet (Daniel Wagner)
      - also consider host_iface when checking ip options (Daniel
        Wagner)
      - don't map pages which can't come from HIGHMEM (Fabio M. De
        Francesco)
      - avoid unnecessary flush bios in nvmet (Guixin Liu)
      - shrink and better pack the nvme_iod structure (Keith Busch)
      - add comment for unaligned "fake" nqn (Linjun Bao)
      - print actual source IP address through sysfs "address" attr
        (Martin Belanger)
      - various cleanups (Jackie Liu, Wolfram Sang, Genjian Zhang)
      - handle effects after freeing the request (Keith Busch)
      - copy firmware_rev on each init (Keith Busch)
      - restrict management ioctls to admin (Keith Busch)
      - ensure subsystem reset is single threaded (Keith Busch)
      - report the actual number of tagset maps in nvme-pci (Keith
        Busch)
      - small fabrics authentication fixups (Christoph Hellwig)
      - add common code for tagset allocation and freeing (Christoph
        Hellwig)
      - stop using the request_queue in nvmet (Christoph Hellwig)
      - set min_align_mask before calculating max_hw_sectors (Rishabh
        Bhatnagar)
      - send a rediscover uevent when a persistent discovery controller
        reconnects (Sagi Grimberg)
      - misc nvmet-tcp fixes (Varun Prakash, zhenwei pi)

 - MD pull request via Song:
      - Various raid5 fix and clean up, by Logan Gunthorpe and David
        Sloan.
      - Raid10 performance optimization, by Yu Kuai.

 - sbitmap wakeup hang fixes (Hugh, Keith, Jan, Yu)

 - IO scheduler switching quisce fix (Keith)

 - s390/dasd block driver updates (Stefan)

 - support for recovery for the ublk driver (ZiyangZhang)

 - rnbd drivers fixes and updates (Guoqing, Santosh, ye, Christoph)

 - blk-mq and null_blk map fixes (Bart)

 - various bcache fixes (Coly, Jilin, Jules)

 - nbd signal hang fix (Shigeru)

 - block writeback throttling fix (Yu)

 - optimize the passthrough mapping handling (me)

 - prepare block cgroups to being gendisk based (Christoph)

 - get rid of an old PSI hack in the block layer, moving it to the
   callers instead where it belongs (Christoph)

 - blk-throttle fixes and cleanups (Yu)

 - misc fixes and cleanups (Liu Shixin, Liu Song, Miaohe, Pankaj,
   Ping-Xiang, Wolfram, Saurabh, Li Jinlin, Li Lei, Lin, Li zeming,
   Miaohe, Bart, Coly, Gaosheng

* tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux: (162 commits)
  sbitmap: fix lockup while swapping
  block: add rationale for not using blk_mq_plug() when applicable
  block: adapt blk_mq_plug() to not plug for writes that require a zone lock
  s390/dasd: use blk_mq_alloc_disk
  blk-cgroup: don't update the blkg lookup hint in blkg_conf_prep
  nvmet: don't look at the request_queue in nvmet_bdev_set_limits
  nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all
  blk-mq: use quiesced elevator switch when reinitializing queues
  block: replace blk_queue_nowait with bdev_nowait
  nvme: remove nvme_ctrl_init_connect_q
  nvme-loop: use the tagset alloc/free helpers
  nvme-loop: store the generic nvme_ctrl in set->driver_data
  nvme-loop: initialize sqsize later
  nvme-fc: use the tagset alloc/free helpers
  nvme-fc: store the generic nvme_ctrl in set->driver_data
  nvme-fc: keep ctrl->sqsize in sync with opts->queue_size
  nvme-rdma: use the tagset alloc/free helpers
  nvme-rdma: store the generic nvme_ctrl in set->driver_data
  nvme-tcp: use the tagset alloc/free helpers
  nvme-tcp: store the generic nvme_ctrl in set->driver_data
  ...

md/raid10: convert resync_lock to use seqlock

2022-09-22T07:05:05+00:00

Currently, wait_barrier() will hold 'resync_lock' to read 'conf->barrier',
and io can't be dispatched until 'barrier' is dropped.

Since holding the 'barrier' is not common, convert 'resync_lock' to use
seqlock so that holding lock can be avoided in fast path.

Signed-off-by: Yu Kuai 
Reviewed-and-Tested-by: Logan Gunthorpe 
Signed-off-by: Song Liu

md/raid10: fix improper BUG_ON() in raise_barrier()

2022-09-22T07:05:05+00:00

'conf->barrier' is protected by 'conf->resync_lock', reading
'conf->barrier' without holding the lock is wrong.

Signed-off-by: Yu Kuai 
Reviewed-by: Logan Gunthorpe 
Acked-by: Guoqing Jiang 
Signed-off-by: Song Liu

md/raid10: prevent unnecessary calls to wake_up() in fast path

2022-09-22T07:05:05+00:00

Currently, wake_up() is called unconditionally in fast path such as
raid10_make_request(), which will cause lock contention under high
concurrency:

raid10_make_request
 wake_up
  __wake_up_common_lock
   spin_lock_irqsave

Improve performance by only call wake_up() if waitqueue is not empty
in allow_barrier() and raid10_make_request().

Signed-off-by: Yu Kuai 
Reviewed-by: Logan Gunthorpe 
Acked-by: Guoqing Jiang 
Signed-off-by: Song Liu

md/raid10: don't modify 'nr_waitng' in wait_barrier() for the case nowait

2022-09-22T07:05:05+00:00

For the case nowait in wait_barrier(), there is no point to increase
nr_waiting and then decrease it.

Signed-off-by: Yu Kuai 
Reviewed-by: Logan Gunthorpe 
Acked-by: Guoqing Jiang 
Signed-off-by: Song Liu

md/raid10: factor out code from wait_barrier() to stop_waiting_barrier()

2022-09-22T07:05:05+00:00

Currently the nasty condition in wait_barrier() is hard to read. This
patch factors out the condition into a function.

There are no functional changes.

Signed-off-by: Yu Kuai 
Acked-by: Paul Menzel 
Reviewed-by: Logan Gunthorpe 
Acked-by: Guoqing Jiang 
Signed-off-by: Song Liu

md/raid10: fix compile warning

2022-09-22T07:05:03+00:00

With W=1, compiler complains.

drivers/md/raid10.c:1983: warning: bad line:

Signed-off-by: Guoqing Jiang 
Signed-off-by: Song Liu

md/raid10: Fix the data type of an r10_sync_page_io() argument

2022-08-24T17:26:35+00:00

Fix the following sparse warning:

drivers/md/raid10.c:2647:60: sparse: sparse: incorrect type in argument 5 (different base types) @@     expected restricted blk_opf_t [usertype] opf @@     got int rw @@

This patch does not change any functionality since REQ_OP_READ = READ = 0
and since REQ_OP_WRITE = WRITE = 1.

Cc: Rong A Chen 
Cc: Jens Axboe 
Cc: Paul Menzel 
Fixes: 4ce4c73f662b ("md/core: Combine two sync_page_io() arguments")
Reported-by: kernel test robot 
Signed-off-by: Bart Van Assche 
Signed-off-by: Song Liu