md_account_bio() is not called from raid10_handle_discard(), now that we
handle bitmap inside md_account_bio(), also fix missing
bitmap_startwrite for discard.

Test whole disk discard for 20G raid10:

Before:
Device   d/s     dMB/s   drqm/s  %drqm d_await dareq-sz
md0    48.00     16.00     0.00   0.00    5.42   341.33

After:
Device   d/s     dMB/s   drqm/s  %drqm d_await dareq-sz
md0    68.00  20462.00     0.00   0.00    2.65 308133.65

Link: https://lore.kernel.org/linux-raid/20250325015746.3195035-1-yukuai1@huaweicloud.com
Fixes: 528bc2cf2fcc ("md/raid10: enable io accounting")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Coly Li <colyli@kernel.org>

Pull block updates from Jens Axboe:

 - Fixes for integrity handling

 - NVMe pull request via Keith:
      - Secure concatenation for TCP transport (Hannes)
      - Multipath sysfs visibility (Nilay)
      - Various cleanups (Qasim, Baruch, Wang, Chen, Mike, Damien, Li)
      - Correct use of 64-bit BARs for pci-epf target (Niklas)
      - Socket fix for selinux when used in containers (Peijie)

 - MD pull request via Yu:
      - fix recovery can preempt resync (Li Nan)
      - fix md-bitmap IO limit (Su Yue)
      - fix raid10 discard with REQ_NOWAIT (Xiao Ni)
      - fix raid1 memory leak (Zheng Qixing)
      - fix mddev uaf (Yu Kuai)
      - fix raid1,raid10 IO flags (Yu Kuai)
      - some refactor and cleanup (Yu Kuai)

 - Series cleaning up and fixing bugs in the bad block handling code

 - Improve support for write failure simulation in null_blk

 - Various lock ordering fixes

 - Fixes for locking for debugfs attributes

 - Various ublk related fixes and improvements

 - Cleanups for blk-rq-qos wait handling

 - blk-throttle fixes

 - Fixes for loop dio and sync handling

 - Fixes and cleanups for the auto-PI code

 - Block side support for hardware encryption keys in blk-crypto

 - Various cleanups and fixes

* tag 'for-6.15/block-20250322' of git://git.kernel.dk/linux: (105 commits)
  nvmet: replace max(a, min(b, c)) by clamp(val, lo, hi)
  nvme-tcp: fix selinux denied when calling sock_sendmsg
  nvmet: pci-epf: Always configure BAR0 as 64-bit
  nvmet: Remove duplicate uuid_copy
  nvme: zns: Simplify nvme_zone_parse_entry()
  nvmet: pci-epf: Remove redundant 'flush_workqueue()' calls
  nvmet-fc: Remove unused functions
  nvme-pci: remove stale comment
  nvme-fc: Utilise min3() to simplify queue count calculation
  nvme-multipath: Add visibility for queue-depth io-policy
  nvme-multipath: Add visibility for numa io-policy
  nvme-multipath: Add visibility for round-robin io-policy
  nvmet: add tls_concat and tls_key debugfs entries
  nvmet-tcp: support secure channel concatenation
  nvmet: Add 'sq' argument to alloc_ctrl_args
  nvme-fabrics: reset admin connection for secure concatenation
  nvme-tcp: request secure channel concatenation
  nvme-keyring: add nvme_tls_psk_refresh()
  nvme: add nvme_auth_derive_tls_psk()
  nvme: add nvme_auth_generate_digest()
  ...

Merge MD changes from Yu:

"- fix recovery can preempt resync (Li Nan)
 - fix md-bitmap IO limit (Su Yue)
 - fix raid10 discard with REQ_NOWAIT (Xiao Ni)
 - fix raid1 memory leak (Zheng Qixing)
 - fix mddev uaf (Yu Kuai)
 - fix raid1,raid10 IO flags (Yu Kuai)
 - some refactor and cleanup (Yu Kuai)"

* tag 'md-6.15-20250312' of https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux:
  md/raid10: wait barrier before returning discard request with REQ_NOWAIT
  md/md-bitmap: fix wrong bitmap_limit for clustermd when write sb
  md/raid1,raid10: don't ignore IO flags
  md/raid5: merge reshape_progress checking inside get_reshape_loc()
  md: fix mddev uaf while iterating all_mddevs list
  md: switch md-cluster to use md_submodle_head
  md: don't export md_cluster_ops
  md/md-cluster: cleanup md_cluster_ops reference
  md: switch personalities to use md_submodule_head
  md: introduce struct md_submodule_head and APIs
  md: only include md-cluster.h if necessary
  md: merge common code into find_pers()
  md/raid1: fix memory leak in raid1_run() if no active rdev
  md: ensure resync is prioritized over recovery

There is a truncation of badblocks length issue when set badblocks as
follow:

echo "2055 4294967299" > bad_blocks
cat bad_blocks
2055 3

Change 'sectors' argument type from 'int' to 'sector_t'.

This change avoids truncation of badblocks length for large sectors by
replacing 'int' with 'sector_t' (u64), enabling proper handling of larger
disk sizes and ensuring compatibility with 64-bit sector addressing.

Fixes: 9e0e252a048b ("badblocks: Add core badblock management code")
Signed-off-by: Zheng Qixing <zhengqixing@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Coly Li <colyli@kernel.org>
Link: https://lore.kernel.org/r/20250227075507.151331-13-zhengqixing@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

rdev_set_badblocks() only indicates success/failure, so convert its return
type from int to boolean for better semantic clarity.

rdev_clear_badblocks() return value is never used by any caller, convert it
to void. This removes unnecessary value returns.

Also update narrow_write_error() in both raid1 and raid10 to use boolean
return type to match rdev_set_badblocks().

Signed-off-by: Zheng Qixing <zhengqixing@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250227075507.151331-12-zhengqixing@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

raid10_handle_discard should wait barrier before returning a discard bio
which has REQ_NOWAIT. And there is no need to print warning calltrace
if a discard bio has REQ_NOWAIT flag. Quality engineer usually checks
dmesg and reports error if dmesg has warning/error calltrace.

Fixes: c9aa889b035f ("md: raid10 add nowait support")
Signed-off-by: Xiao Ni <xni@redhat.com>
Acked-by: Coly Li <colyli@kernel.org>
Link: https://lore.kernel.org/linux-raid/20250306094938.48952-1-xni@redhat.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>

If blk-wbt is enabled by default, it's found that raid write performance
is quite bad because all IO are throttled by wbt of underlying disks,
due to flag REQ_IDLE is ignored. And turns out this behaviour exist since
blk-wbt is introduced.

Other than REQ_IDLE, other flags should not be ignored as well, for
example REQ_META can be set for filesystems, clearing it can cause priority
reverse problems; And REQ_NOWAIT should not be cleared as well, because
io will wait instead of failing directly in underlying disks.

Fix those problems by keep IO flags from master bio.

Fises: f51d46d0e7cb ("md: add support for REQ_NOWAIT")
Fixes: e34cbd307477 ("blk-wbt: add general throttling mechanism")
Fixes: 5404bc7a87b9 ("[PATCH] Allow file systems to differentiate between data and meta reads")
Link: https://lore.kernel.org/linux-raid/20250227121657.832356-1-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>

Add a new field 'cluster_ops' and initialize it md_setup_cluster(), so
that the gloable variable 'md_cluter_ops' doesn't need to be exported.
Also prepare to switch md-cluster to use md_submod_head.

Link: https://lore.kernel.org/linux-raid/20250215092225.2427977-7-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Su Yue <glass.su@suse.com>

Remove the global list 'pers_list', and switch to use md_submodule_head,
which is managed by xarry. Prepare to unify registration and unregistration
for all sub modules.

Link: https://lore.kernel.org/linux-raid/20250215092225.2427977-5-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>

md-cluster is only supportted by raid1 and raid10, there is no need to
include md-cluster.h for other personalities.

Also move APIs that is only used in md-cluster.c from md.h to
md-cluster.h.

Link: https://lore.kernel.org/linux-raid/20250215092225.2427977-3-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Su Yue <glass.su@suse.com>