linux-stable.git/drivers/md/raid10.c, branch v6.14

md/raid*: Fix the set_queue_limits implementations

2025-02-13T17:29:33+00:00

queue_limits_cancel_update() must only be called if
queue_limits_start_update() is called first. Remove the
queue_limits_cancel_update() calls from the raid*_set_limits() functions
because there is no corresponding queue_limits_start_update() call.

Cc: Christoph Hellwig 
Fixes: c6e56cf6b2e7 ("block: move integrity information into queue_limits")
Signed-off-by: Bart Van Assche 
Reviewed-by: Christoph Hellwig 
Link: https://lore.kernel.org/linux-raid/20250212171108.3483150-1-bvanassche@acm.org/
Signed-off-by: Yu Kuai

block: Add common atomic writes enable flag

2025-01-17T20:13:54+00:00

Currently only stacked devices need to explicitly enable atomic writes by
setting BLK_FEAT_ATOMIC_WRITES_STACKED flag.

This does not work well for device mapper stacking devices, as there many
sets of limits are stacked and what is the 'bottom' and 'top' device can
swapped. This means that BLK_FEAT_ATOMIC_WRITES_STACKED needs to be set
for many queue limits, which is messy.

Generalize enabling atomic writes enabling by ensuring that all devices
must explicitly set a flag - that includes NVMe, SCSI sd, and md raid.

Signed-off-by: John Garry 
Reviewed-by: Mike Snitzer 
Link: https://lore.kernel.org/r/20250116170301.474130-2-john.g.garry@oracle.com
Signed-off-by: Jens Axboe

md/md-bitmap: move bitmap_{start, end}write to md upper layer

2025-01-13T16:56:11+00:00

There are two BUG reports that raid5 will hang at
bitmap_startwrite([1],[2]), root cause is that bitmap start write and end
write is unbalanced, it's not quite clear where, and while reviewing raid5
code, it's found that bitmap operations can be optimized. For example,
for a 4 disks raid5, with chunksize=8k, if user issue a IO (0 + 48k) to
the array:

┌────────────────────────────────────────────────────────────┐
│chunk 0                                                     │
│      ┌────────────┬─────────────┬─────────────┬────────────┼
│  sh0 │A0: 0 + 4k  │A1: 8k + 4k  │A2: 16k + 4k │A3: P       │
│      ┼────────────┼─────────────┼─────────────┼────────────┼
│  sh1 │B0: 4k + 4k │B1: 12k + 4k │B2: 20k + 4k │B3: P       │
┼──────┴────────────┴─────────────┴─────────────┴────────────┼
│chunk 1                                                     │
│      ┌────────────┬─────────────┬─────────────┬────────────┤
│  sh2 │C0: 24k + 4k│C1: 32k + 4k │C2: P        │C3: 40k + 4k│
│      ┼────────────┼─────────────┼─────────────┼────────────┼
│  sh3 │D0: 28k + 4k│D1: 36k + 4k │D2: P        │D3: 44k + 4k│
└──────┴────────────┴─────────────┴─────────────┴────────────┘

Before this patch, 4 stripe head will be used, and each sh will attach
bio for 3 disks, and each attached bio will trigger
bitmap_startwrite() once, which means total 12 times.
 - 3 times (0 + 4k), for (A0, A1 and A2)
 - 3 times (4 + 4k), for (B0, B1 and B2)
 - 3 times (8 + 4k), for (C0, C1 and C3)
 - 3 times (12 + 4k), for (D0, D1 and D3)

After this patch, md upper layer will calculate that IO range (0 + 48k)
is corresponding to the bitmap (0 + 16k), and call bitmap_startwrite()
just once.

Noted that this patch will align bitmap ranges to the chunks, for example,
if user issue a IO (0 + 4k) to array:

- Before this patch, 1 time (0 + 4k), for A0;
- After this patch, 1 time (0 + 8k) for chunk 0;

Usually, one bitmap bit will represent more than one disk chunk, and this
doesn't have any difference. And even if user really created a array
that one chunk contain multiple bits, the overhead is that more data
will be recovered after power failure.

Also remove STRIPE_BITMAP_PENDING since it's not used anymore.

[1] https://lore.kernel.org/all/CAJpMwyjmHQLvm6zg1cmQErttNNQPDAAXPKM3xgTjMhbfts986Q@mail.gmail.com/
[2] https://lore.kernel.org/all/ADF7D720-5764-4AF3-B68E-1845988737AA@flyingcircus.io/

Signed-off-by: Yu Kuai 
Link: https://lore.kernel.org/r/20250109015145.158868-6-yukuai1@huaweicloud.com
Signed-off-by: Song Liu

md/md-bitmap: remove the last parameter for bimtap_ops->endwrite()

2025-01-13T16:56:10+00:00

For the case that IO failed for one rdev, the bit will be mark as NEEDED
in following cases:

1) If badblocks is set and rdev is not faulty;
2) If rdev is faulty;

Case 1) is useless because synchronize data to badblocks make no sense.
Case 2) can be replaced with mddev->degraded.

Also remove R1BIO_Degraded, R10BIO_Degraded and STRIPE_DEGRADED since
case 2) no longer use them.

Signed-off-by: Yu Kuai 
Link: https://lore.kernel.org/r/20250109015145.158868-3-yukuai1@huaweicloud.com
Signed-off-by: Song Liu

md/md-bitmap: factor behind write counters out from bitmap_{start/end}write()

2025-01-13T16:56:10+00:00

behind_write is only used in raid1, prepare to refactor
bitmap_{start/end}write(), there are no functional changes.

Signed-off-by: Yu Kuai 
Reviewed-by: Xiao Ni 
Link: https://lore.kernel.org/r/20250109015145.158868-2-yukuai1@huaweicloud.com
Signed-off-by: Song Liu

Merge tag 'block-6.13-20242901' of git://git.kernel.dk/linux

2024-11-30T23:47:29+00:00

Pull more block updates from Jens Axboe:

 - NVMe pull request via Keith:
      - Use correct srcu list traversal (Breno)
      - Scatter-gather support for metadata (Keith)
      - Fabrics shutdown race condition fix (Nilay)
      - Persistent reservations updates (Guixin)

 - Add the required bits for MD atomic write support for raid0/1/10

 - Correct return value for unknown opcode in ublk

 - Fix deadlock with zone revalidation

 - Fix for the io priority request vs bio cleanups

 - Use the correct unsigned int type for various limit helpers

 - Fix for a race in loop

 - Cleanup blk_rq_prep_clone() to prevent uninit-value warning and make
   it easier for actual humans to read

 - Fix potential UAF when iterating tags

 - A few fixes for bfq-iosched UAF issues

 - Fix for brd discard not decrementing the allocated page count

 - Various little fixes and cleanups

* tag 'block-6.13-20242901' of git://git.kernel.dk/linux: (36 commits)
  brd: decrease the number of allocated pages which discarded
  block, bfq: fix bfqq uaf in bfq_limit_depth()
  block: Don't allow an atomic write be truncated in blkdev_write_iter()
  mq-deadline: don't call req_get_ioprio from the I/O completion handler
  block: Prevent potential deadlock in blk_revalidate_disk_zones()
  block: Remove extra part pointer NULLify in blk_rq_init()
  nvme: tuning pr code by using defined structs and macros
  nvme: introduce change ptpl and iekey definition
  block: return bool from get_disk_ro and bdev_read_only
  block: remove a duplicate definition for bdev_read_only
  block: return bool from blk_rq_aligned
  block: return unsigned int from blk_lim_dma_alignment_and_pad
  block: return unsigned int from queue_dma_alignment
  block: return unsigned int from bdev_io_opt
  block: req->bio is always set in the merge code
  block: don't bother checking the data direction for merges
  block: blk-mq: fix uninit-value in blk_rq_prep_clone and refactor
  Revert "block, bfq: merge bfq_release_process_ref() into bfq_put_cooperator()"
  md/raid10: Atomic write support
  md/raid1: Atomic write support
  ...

md/raid10: Atomic write support

2024-11-19T17:30:02+00:00

Set BLK_FEAT_ATOMIC_WRITES_STACKED to enable atomic writes.

For an attempt to atomic write to a region which has bad blocks, error
the write as we just cannot do this. It is unlikely to find devices which
support atomic writes and bad blocks.

Reviewed-by: Yu Kuai 
Signed-off-by: John Garry 
Reviewed-by: Martin K. Petersen 
Link: https://lore.kernel.org/r/20241118105018.1870052-6-john.g.garry@oracle.com
Signed-off-by: Jens Axboe

Merge tag 'for-6.13/block-20241118' of git://git.kernel.dk/linux

2024-11-19T00:50:08+00:00

Pull block updates from Jens Axboe:

 - NVMe updates via Keith:
      - Use uring_cmd helper (Pavel)
      - Host Memory Buffer allocation enhancements (Christoph)
      - Target persistent reservation support (Guixin)
      - Persistent reservation tracing (Guixen)
      - NVMe 2.1 specification support (Keith)
      - Rotational Meta Support (Matias, Wang, Keith)
      - Volatile cache detection enhancment (Guixen)

 - MD updates via Song:
      - Maintainers update
      - raid5 sync IO fix
      - Enhance handling of faulty and blocked devices
      - raid5-ppl atomic improvement
      - md-bitmap fix

 - Support for manually defining embedded partition tables

 - Zone append fixes and cleanups

 - Stop sending the queued requests in the plug list to the driver
   ->queue_rqs() handle in reverse order.

 - Zoned write plug cleanups

 - Cleanups disk stats tracking and add support for disk stats for
   passthrough IO

 - Add preparatory support for file system atomic writes

 - Add lockdep support for queue freezing. Already found a bunch of
   issues, and some fixes for that are in here. More will be coming.

 - Fix race between queue stopping/quiescing and IO queueing

 - ublk recovery improvements

 - Fix ublk mmap for 64k pages

 - Various fixes and cleanups

* tag 'for-6.13/block-20241118' of git://git.kernel.dk/linux: (118 commits)
  MAINTAINERS: Update git tree for mdraid subsystem
  block: make struct rq_list available for !CONFIG_BLOCK
  block/genhd: use seq_put_decimal_ull for diskstats decimal values
  block: don't reorder requests in blk_mq_add_to_batch
  block: don't reorder requests in blk_add_rq_to_plug
  block: add a rq_list type
  block: remove rq_list_move
  virtio_blk: reverse request order in virtio_queue_rqs
  nvme-pci: reverse request order in nvme_queue_rqs
  btrfs: validate queue limits
  block: export blk_validate_limits
  nvmet: add tracing of reservation commands
  nvme: parse reservation commands's action and rtype to string
  nvmet: report ns's vwc not present
  md/raid5: Increase r5conf.cache_name size
  block: remove the ioprio field from struct request
  block: remove the write_hint field from struct request
  nvme: check ns's volatile write cache not present
  nvme: add rotational support
  nvme: use command set independent id ns if available
  ...

md/raid10: Handle bio_split() errors

2024-11-11T15:35:46+00:00

Add proper bio_split() error handling. For any error, call
raid_end_bio_io() and return. Except for discard, where we end the bio
directly.

Reviewed-by: Yu Kuai 
Reviewed-by: Hannes Reinecke 
Signed-off-by: John Garry 
Link: https://lore.kernel.org/r/20241111112150.3756529-7-john.g.garry@oracle.com
Signed-off-by: Jens Axboe

md/raid10: don't wait for Faulty rdev in wait_blocked_rdev()

2024-11-06T00:08:39+00:00

Faulty rdev should never be accessed anymore, hence there is no point to
wait for bad block to be acknowledged in this case while handling write
request.

Signed-off-by: Yu Kuai 
Tested-by: Mariusz Tkaczyk 
Link: https://lore.kernel.org/r/20241031033114.3845582-7-yukuai1@huaweicloud.com
Signed-off-by: Song Liu