linux-stable.git/drivers/md/raid10.c, branch v4.14.331

md/raid10: prevent soft lockup while flush writes

2023-08-11T09:33:48+00:00

[ Upstream commit 010444623e7f4da6b4a4dd603a7da7469981e293 ]

Currently, there is no limit for raid1/raid10 plugged bio. While flushing
writes, raid1 has cond_resched() while raid10 doesn't, and too many
writes can cause soft lockup.

Follow up soft lockup can be triggered easily with writeback test for
raid10 with ramdisks:

watchdog: BUG: soft lockup - CPU#10 stuck for 27s! [md0_raid10:1293]
Call Trace:
 
 call_rcu+0x16/0x20
 put_object+0x41/0x80
 __delete_object+0x50/0x90
 delete_object_full+0x2b/0x40
 kmemleak_free+0x46/0xa0
 slab_free_freelist_hook.constprop.0+0xed/0x1a0
 kmem_cache_free+0xfd/0x300
 mempool_free_slab+0x1f/0x30
 mempool_free+0x3a/0x100
 bio_free+0x59/0x80
 bio_put+0xcf/0x2c0
 free_r10bio+0xbf/0xf0
 raid_end_bio_io+0x78/0xb0
 one_write_done+0x8a/0xa0
 raid10_end_write_request+0x1b4/0x430
 bio_endio+0x175/0x320
 brd_submit_bio+0x3b9/0x9b7 [brd]
 __submit_bio+0x69/0xe0
 submit_bio_noacct_nocheck+0x1e6/0x5a0
 submit_bio_noacct+0x38c/0x7e0
 flush_pending_writes+0xf0/0x240
 raid10d+0xac/0x1ed0

Fix the problem by adding cond_resched() to raid10 like what raid1 did.

Note that unlimited plugged bio still need to be optimized, for example,
in the case of lots of dirty pages writeback, this will take lots of
memory and io will spend a long time in plug, hence io latency is bad.

Signed-off-by: Yu Kuai 
Signed-off-by: Song Liu 
Link: https://lore.kernel.org/r/20230529131106.2123367-2-yukuai1@huaweicloud.com
Signed-off-by: Sasha Levin

md/raid10: fix io loss while replacement replace rdev

2023-08-11T09:33:33+00:00

[ Upstream commit 2ae6aaf76912bae53c74b191569d2ab484f24bf3 ]

When removing a disk with replacement, the replacement will be used to
replace rdev. During this process, there is a brief window in which both
rdev and replacement are read as NULL in raid10_write_request(). This
will result in io not being submitted but it should be.

  //remove				//write
  raid10_remove_disk			raid10_write_request
   mirror->rdev = NULL
					 read rdev -> NULL
   mirror->rdev = mirror->replacement
   mirror->replacement = NULL
					 read replacement -> NULL

Fix it by reading replacement first and rdev later, meanwhile, use smp_mb()
to prevent memory reordering.

Fixes: 475b0321a4df ("md/raid10: writes should get directed to replacement as well as original.")
Signed-off-by: Li Nan 
Reviewed-by: Yu Kuai 
Signed-off-by: Song Liu 
Link: https://lore.kernel.org/r/20230602091839.743798-3-linan666@huaweicloud.com
Signed-off-by: Sasha Levin

md/raid10: fix leak of 'r10bio->remaining' for recovery

2023-05-17T09:11:41+00:00

[ Upstream commit 26208a7cffd0c7cbf14237ccd20c7270b3ffeb7e ]

raid10_sync_request() will add 'r10bio->remaining' for both rdev and
replacement rdev. However, if the read io fails, recovery_request_write()
returns without issuing the write io, in this case, end_sync_request()
is only called once and 'remaining' is leaked, cause an io hang.

Fix the problem by decreasing 'remaining' according to if 'bio' and
'repl_bio' is valid.

Fixes: 24afd80d99f8 ("md/raid10: handle recovery of replacement devices.")
Signed-off-by: Yu Kuai 
Signed-off-by: Song Liu 
Link: https://lore.kernel.org/r/20230310073855.1337560-5-yukuai1@huaweicloud.com
Signed-off-by: Sasha Levin

md-raid10: fix KASAN warning

2022-08-25T09:11:12+00:00

commit d17f744e883b2f8d13cca252d71cfe8ace346f7d upstream.

There's a KASAN warning in raid10_remove_disk when running the lvm
test lvconvert-raid-reshape.sh. We fix this warning by verifying that the
value "number" is valid.

BUG: KASAN: slab-out-of-bounds in raid10_remove_disk+0x61/0x2a0 [raid10]
Read of size 8 at addr ffff889108f3d300 by task mdX_raid10/124682

CPU: 3 PID: 124682 Comm: mdX_raid10 Not tainted 5.19.0-rc6 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
Call Trace:
 
 dump_stack_lvl+0x34/0x44
 print_report.cold+0x45/0x57a
 ? __lock_text_start+0x18/0x18
 ? raid10_remove_disk+0x61/0x2a0 [raid10]
 kasan_report+0xa8/0xe0
 ? raid10_remove_disk+0x61/0x2a0 [raid10]
 raid10_remove_disk+0x61/0x2a0 [raid10]
Buffer I/O error on dev dm-76, logical block 15344, async page read
 ? __mutex_unlock_slowpath.constprop.0+0x1e0/0x1e0
 remove_and_add_spares+0x367/0x8a0 [md_mod]
 ? super_written+0x1c0/0x1c0 [md_mod]
 ? mutex_trylock+0xac/0x120
 ? _raw_spin_lock+0x72/0xc0
 ? _raw_spin_lock_bh+0xc0/0xc0
 md_check_recovery+0x848/0x960 [md_mod]
 raid10d+0xcf/0x3360 [raid10]
 ? sched_clock_cpu+0x185/0x1a0
 ? rb_erase+0x4d4/0x620
 ? var_wake_function+0xe0/0xe0
 ? psi_group_change+0x411/0x500
 ? preempt_count_sub+0xf/0xc0
 ? _raw_spin_lock_irqsave+0x78/0xc0
 ? __lock_text_start+0x18/0x18
 ? raid10_sync_request+0x36c0/0x36c0 [raid10]
 ? preempt_count_sub+0xf/0xc0
 ? _raw_spin_unlock_irqrestore+0x19/0x40
 ? del_timer_sync+0xa9/0x100
 ? try_to_del_timer_sync+0xc0/0xc0
 ? _raw_spin_lock_irqsave+0x78/0xc0
 ? __lock_text_start+0x18/0x18
 ? _raw_spin_unlock_irq+0x11/0x24
 ? __list_del_entry_valid+0x68/0xa0
 ? finish_wait+0xa3/0x100
 md_thread+0x161/0x260 [md_mod]
 ? unregister_md_personality+0xa0/0xa0 [md_mod]
 ? _raw_spin_lock_irqsave+0x78/0xc0
 ? prepare_to_wait_event+0x2c0/0x2c0
 ? unregister_md_personality+0xa0/0xa0 [md_mod]
 kthread+0x148/0x180
 ? kthread_complete_and_exit+0x20/0x20
 ret_from_fork+0x1f/0x30
 

Allocated by task 124495:
 kasan_save_stack+0x1e/0x40
 __kasan_kmalloc+0x80/0xa0
 setup_conf+0x140/0x5c0 [raid10]
 raid10_run+0x4cd/0x740 [raid10]
 md_run+0x6f9/0x1300 [md_mod]
 raid_ctr+0x2531/0x4ac0 [dm_raid]
 dm_table_add_target+0x2b0/0x620 [dm_mod]
 table_load+0x1c8/0x400 [dm_mod]
 ctl_ioctl+0x29e/0x560 [dm_mod]
 dm_compat_ctl_ioctl+0x7/0x20 [dm_mod]
 __do_compat_sys_ioctl+0xfa/0x160
 do_syscall_64+0x90/0xc0
 entry_SYSCALL_64_after_hwframe+0x46/0xb0

Last potentially related work creation:
 kasan_save_stack+0x1e/0x40
 __kasan_record_aux_stack+0x9e/0xc0
 kvfree_call_rcu+0x84/0x480
 timerfd_release+0x82/0x140
L __fput+0xfa/0x400
 task_work_run+0x80/0xc0
 exit_to_user_mode_prepare+0x155/0x160
 syscall_exit_to_user_mode+0x12/0x40
 do_syscall_64+0x42/0xc0
 entry_SYSCALL_64_after_hwframe+0x46/0xb0

Second to last potentially related work creation:
 kasan_save_stack+0x1e/0x40
 __kasan_record_aux_stack+0x9e/0xc0
 kvfree_call_rcu+0x84/0x480
 timerfd_release+0x82/0x140
 __fput+0xfa/0x400
 task_work_run+0x80/0xc0
 exit_to_user_mode_prepare+0x155/0x160
 syscall_exit_to_user_mode+0x12/0x40
 do_syscall_64+0x42/0xc0
 entry_SYSCALL_64_after_hwframe+0x46/0xb0

The buggy address belongs to the object at ffff889108f3d200
 which belongs to the cache kmalloc-256 of size 256
The buggy address is located 0 bytes to the right of
 256-byte region [ffff889108f3d200, ffff889108f3d300)

The buggy address belongs to the physical page:
page:000000007ef2a34c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1108f3c
head:000000007ef2a34c order:2 compound_mapcount:0 compound_pincount:0
flags: 0x4000000000010200(slab|head|zone=2)
raw: 4000000000010200 0000000000000000 dead000000000001 ffff889100042b40
raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff889108f3d200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff889108f3d280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff889108f3d300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
                   ^
 ffff889108f3d380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff889108f3d400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Signed-off-by: Mikulas Patocka 
Cc: stable@vger.kernel.org
Signed-off-by: Song Liu 
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

md/raid10: initialize r10_bio->read_slot before use.

2021-01-09T12:37:36+00:00

commit 93decc563637c4288380912eac0eb42fb246cc04 upstream.

In __make_request() a new r10bio is allocated and passed to
raid10_read_request(). The read_slot member of the bio is not
initialized, and the raid10_read_request() uses it to index an
array. This leads to occasional panics.

Fix by initializing the field to invalid value and checking for
valid value in raid10_read_request().

Cc: stable@vger.kernel.org
Signed-off-by: Kevin Vigor 
Signed-off-by: Song Liu 
Signed-off-by: Greg Kroah-Hartman

md/raid10: prevent access of uninitialized resync_pages offset

2019-12-01T08:14:17+00:00

commit 45422b704db392a6d79d07ee3e3670b11048bd53 upstream.

Due to unneeded multiplication in the out_free_pages portion of
r10buf_pool_alloc(), when using a 3-copy raid10 layout, it is
possible to access a resync_pages offset that has not been
initialized.  This access translates into a crash of the system
within resync_free_pages() while passing a bad pointer to
put_page().  Remove the multiplication, preventing access to the
uninitialized area.

Fixes: f0250618361db ("md: raid10: don't use bio's vec table to manage resync pages")
Cc: stable@vger.kernel.org # 4.12+
Signed-off-by: John Pittman 
Suggested-by: David Jeffery 
Reviewed-by: Laurence Oberman 
Signed-off-by: Song Liu 
Signed-off-by: Greg Kroah-Hartman

md: Fix failed allocation of md_register_thread

2019-03-23T13:35:30+00:00

commit e406f12dde1a8375d77ea02d91f313fb1a9c6aec upstream.

mddev->sync_thread can be set to NULL on kzalloc failure downstream.
The patch checks for such a scenario and frees allocated resources.

Committer node:

Added similar fix to raid5.c, as suggested by Guoqing.

Cc: stable@vger.kernel.org # v3.16+
Acked-by: Guoqing Jiang 
Signed-off-by: Aditya Pakki 
Signed-off-by: Song Liu 
Signed-off-by: Greg Kroah-Hartman

It's wrong to add len to sector_nr in raid10 reshape twice

2019-03-19T12:13:25+00:00

commit b761dcf1217760a42f7897c31dcb649f59b2333e upstream.

In reshape_request it already adds len to sector_nr already. It's wrong to add len to
sector_nr again after adding pages to bio. If there is bad block it can't copy one chunk
at a time, it needs to goto read_more. Now the sector_nr is wrong. It can cause data
corruption.

Cc: stable@vger.kernel.org # v3.16+
Signed-off-by: Xiao Ni 
Signed-off-by: Song Liu 
Signed-off-by: Greg Kroah-Hartman

md: fix raid10 hang issue caused by barrier

2019-02-12T18:46:06+00:00

[ Upstream commit e820d55cb99dd93ac2dc949cf486bb187e5cd70d ]

When both regular IO and resync IO happen at the same time,
and if we also need to split regular. Then we can see tasks
hang due to barrier.

1. resync thread
[ 1463.757205] INFO: task md1_resync:5215 blocked for more than 480 seconds.
[ 1463.757207]       Not tainted 4.19.5-1-default #1
[ 1463.757209] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1463.757212] md1_resync      D    0  5215      2 0x80000000
[ 1463.757216] Call Trace:
[ 1463.757223]  ? __schedule+0x29a/0x880
[ 1463.757231]  ? raise_barrier+0x8d/0x140 [raid10]
[ 1463.757236]  schedule+0x78/0x110
[ 1463.757243]  raise_barrier+0x8d/0x140 [raid10]
[ 1463.757248]  ? wait_woken+0x80/0x80
[ 1463.757257]  raid10_sync_request+0x1f6/0x1e30 [raid10]
[ 1463.757265]  ? _raw_spin_unlock_irq+0x22/0x40
[ 1463.757284]  ? is_mddev_idle+0x125/0x137 [md_mod]
[ 1463.757302]  md_do_sync.cold.78+0x404/0x969 [md_mod]
[ 1463.757311]  ? wait_woken+0x80/0x80
[ 1463.757336]  ? md_rdev_init+0xb0/0xb0 [md_mod]
[ 1463.757351]  md_thread+0xe9/0x140 [md_mod]
[ 1463.757358]  ? _raw_spin_unlock_irqrestore+0x2e/0x60
[ 1463.757364]  ? __kthread_parkme+0x4c/0x70
[ 1463.757369]  kthread+0x112/0x130
[ 1463.757374]  ? kthread_create_worker_on_cpu+0x40/0x40
[ 1463.757380]  ret_from_fork+0x3a/0x50

2. regular IO
[ 1463.760679] INFO: task kworker/0:8:5367 blocked for more than 480 seconds.
[ 1463.760683]       Not tainted 4.19.5-1-default #1
[ 1463.760684] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1463.760687] kworker/0:8     D    0  5367      2 0x80000000
[ 1463.760718] Workqueue: md submit_flushes [md_mod]
[ 1463.760721] Call Trace:
[ 1463.760731]  ? __schedule+0x29a/0x880
[ 1463.760741]  ? wait_barrier+0xdd/0x170 [raid10]
[ 1463.760746]  schedule+0x78/0x110
[ 1463.760753]  wait_barrier+0xdd/0x170 [raid10]
[ 1463.760761]  ? wait_woken+0x80/0x80
[ 1463.760768]  raid10_write_request+0xf2/0x900 [raid10]
[ 1463.760774]  ? wait_woken+0x80/0x80
[ 1463.760778]  ? mempool_alloc+0x55/0x160
[ 1463.760795]  ? md_write_start+0xa9/0x270 [md_mod]
[ 1463.760801]  ? try_to_wake_up+0x44/0x470
[ 1463.760810]  raid10_make_request+0xc1/0x120 [raid10]
[ 1463.760816]  ? wait_woken+0x80/0x80
[ 1463.760831]  md_handle_request+0x121/0x190 [md_mod]
[ 1463.760851]  md_make_request+0x78/0x190 [md_mod]
[ 1463.760860]  generic_make_request+0x1c6/0x470
[ 1463.760870]  raid10_write_request+0x77a/0x900 [raid10]
[ 1463.760875]  ? wait_woken+0x80/0x80
[ 1463.760879]  ? mempool_alloc+0x55/0x160
[ 1463.760895]  ? md_write_start+0xa9/0x270 [md_mod]
[ 1463.760904]  raid10_make_request+0xc1/0x120 [raid10]
[ 1463.760910]  ? wait_woken+0x80/0x80
[ 1463.760926]  md_handle_request+0x121/0x190 [md_mod]
[ 1463.760931]  ? _raw_spin_unlock_irq+0x22/0x40
[ 1463.760936]  ? finish_task_switch+0x74/0x260
[ 1463.760954]  submit_flushes+0x21/0x40 [md_mod]

So resync io is waiting for regular write io to complete to
decrease nr_pending (conf->barrier++ is called before waiting).
The regular write io splits another bio after call wait_barrier
which call nr_pending++, then the splitted bio would continue
with raid10_write_request -> wait_barrier, so the splitted bio
has to wait for barrier to be zero, then deadlock happens as
follows.

	resync io		regular io

	raise_barrier
				wait_barrier
				generic_make_request
				wait_barrier

To resolve the issue, we need to call allow_barrier to decrease
nr_pending before generic_make_request since regular IO is not
issued to underlying devices, and wait_barrier is called again
to ensure no internal IO happening.

Fixes: fc9977dd069e ("md/raid10: simplify the splitting of requests.")
Reported-and-tested-by: Siniša Bandin 
Signed-off-by: Guoqing Jiang 
Signed-off-by: Shaohua Li 
Signed-off-by: Sasha Levin

md: raid10: remove VLAIS

2019-01-13T09:01:03+00:00

commit 584ed9fa9532f8b9d5955628ff87ee3b2ab9f5a9 upstream.

The raid10 driver can't be built with clang since it uses a variable
length array in a structure (VLAIS):

drivers/md/raid10.c:4583:17: error: fields must have a constant size:
  'variable length array in structure' extension will never be supported

Allocate the r10bio struct with kmalloc instead of using the VLAIS
construct.

Shaohua: set the MD_RECOVERY_INTR bit
Neil Brown: use GFP_NOIO

Signed-off-by: Matthias Kaehlcke 
Reviewed-by: Guenter Roeck 
Signed-off-by: Shaohua Li 
Signed-off-by: Nathan Chancellor 
Signed-off-by: Greg Kroah-Hartman