linux-stable.git/drivers/md/raid10.c, branch linux-3.17.y

md/raid10: always initialise ->state on newly allocated r10_bio

2014-08-19T07:20:27+00:00

Most places which allocate an r10_bio zero the ->state, some don't.
As the r10_bio comes from a mempool, and the allocation function uses
kzalloc it is often zero anyway.  But sometimes it isn't and it is
best to be safe.

I only noticed this because of the bug fixed by an earlier patch
where the r10_bios allocated for a reshape were left around to
be used by a subsequent resync.  In that case the R10BIO_IsReshape
flag caused problems.

Signed-off-by: NeilBrown

md/raid10: avoid memory leak on error path during reshape.

2014-08-19T07:20:27+00:00

If raid10 reshape fails to find somewhere to read a block
from, it returns without freeing memory...

Signed-off-by: NeilBrown

md/raid10: Fix memory leak when raid10 reshape completes.

2014-08-19T07:20:27+00:00

When a raid10 commences a resync/recovery/reshape it allocates
some buffer space.
When a resync/recovery completes the buffer space is freed.  But not
when the reshape completes.
This can result in a small memory leak.

There is a subtle side-effect of this bug.  When a RAID10 is reshaped
to a larger array (more devices), the reshape is immediately followed
by a "resync" of the new space.  This "resync" will use the buffer
space which was allocated for "reshape".  This can cause problems
including a "BUG" in the SCSI layer.  So this is suitable for -stable.

Cc: stable@vger.kernel.org (v3.5+)
Fixes: 3ea7daa5d7fde47cd41f4d56c2deb949114da9d6
Signed-off-by: NeilBrown

md/raid10: fix memory leak when reshaping a RAID10.

2014-08-19T07:20:27+00:00

raid10 reshape clears unwanted bits from a bio->bi_flags using
a method which, while clumsy, worked until 3.10 when BIO_OWNS_VEC
was added.
Since then it clears that bit but shouldn't.  This results in a
memory leak.

So change to used the approved method of clearing unwanted bits.

As this causes a memory leak which can consume all of memory
the fix is suitable for -stable.

Fixes: a38352e0ac02dbbd4fa464dc22d1352b5fbd06fd
Cc: stable@vger.kernel.org (v3.10+)
Reported-by: mdraid.pkoch@dfgh.net (Peter Koch)
Signed-off-by: NeilBrown

md/raid1,raid10: always abort recover on write error.

2014-07-31T00:16:52+00:00

Currently we don't abort recovery on a write error if the write error
to the recovering device was triggerd by normal IO (as opposed to
recovery IO).

This means that for one bitmap region, the recovery might write to the
recovering device for a few sectors, then not bother for subsequent
sectors (as it never writes to failed devices).  In this case
the bitmap bit will be cleared, but it really shouldn't.

The result is that if the recovering device fails and is then re-added
(after fixing whatever hardware problem triggerred the failure),
the second recovery won't redo the region it was in the middle of,
so some of the device will not be recovered properly.

If we abort the recovery, the region being processes will be cancelled
(bit not cleared) and the whole region will be retried.

As the bug can result in data corruption the patch is suitable for
-stable.  For kernels prior to 3.11 there is a conflict in raid10.c
which will require care.

Original-from: jiao hui 
Reported-and-tested-by: jiao hui 
Signed-off-by: NeilBrown 
Cc: stable@vger.kernel.org

md/raid10: call wait_barrier() for each request submitted.

2014-05-05T23:49:26+00:00

wait_barrier() includes a counter, so we must call it precisely once
(unless balanced by allow_barrier()) for each request submitted.

Since
commit 20d0189b1012a37d2533a87fb451f7852f2418d1
    block: Introduce new bio_split()
in 3.14-rc1, we don't call it for the extra requests generated when
we need to split a bio.

When this happens the counter goes negative, any resync/recovery will
never start, and  "mdadm --stop" will hang.

Reported-by: Chris Murphy 
Fixes: 20d0189b1012a37d2533a87fb451f7852f2418d1
Cc: stable@vger.kernel.org (3.14+)
Cc: Kent Overstreet 
Signed-off-by: NeilBrown

Merge branch 'for-3.14/core' of git://git.kernel.dk/linux-block

2014-01-30T19:19:05+00:00

Pull core block IO changes from Jens Axboe:
 "The major piece in here is the immutable bio_ve series from Kent, the
  rest is fairly minor.  It was supposed to go in last round, but
  various issues pushed it to this release instead.  The pull request
  contains:

   - Various smaller blk-mq fixes from different folks.  Nothing major
     here, just minor fixes and cleanups.

   - Fix for a memory leak in the error path in the block ioctl code
     from Christian Engelmayer.

   - Header export fix from CaiZhiyong.

   - Finally the immutable biovec changes from Kent Overstreet.  This
     enables some nice future work on making arbitrarily sized bios
     possible, and splitting more efficient.  Related fixes to immutable
     bio_vecs:

        - dm-cache immutable fixup from Mike Snitzer.
        - btrfs immutable fixup from Muthu Kumar.

  - bio-integrity fix from Nic Bellinger, which is also going to stable"

* 'for-3.14/core' of git://git.kernel.dk/linux-block: (44 commits)
  xtensa: fixup simdisk driver to work with immutable bio_vecs
  block/blk-mq-cpu.c: use hotcpu_notifier()
  blk-mq: for_each_* macro correctness
  block: Fix memory leak in rw_copy_check_uvector() handling
  bio-integrity: Fix bio_integrity_verify segment start bug
  block: remove unrelated header files and export symbol
  blk-mq: uses page->list incorrectly
  blk-mq: use __smp_call_function_single directly
  btrfs: fix missing increment of bi_remaining
  Revert "block: Warn and free bio if bi_end_io is not set"
  block: Warn and free bio if bi_end_io is not set
  blk-mq: fix initializing request's start time
  block: blk-mq: don't export blk_mq_free_queue()
  block: blk-mq: make blk_sync_queue support mq
  block: blk-mq: support draining mq queue
  dm cache: increment bi_remaining when bi_end_io is restored
  block: fixup for generic bio chaining
  block: Really silence spurious compiler warnings
  block: Silence spurious compiler warnings
  block: Kill bio_pair_split()
  ...

md/raid10: avoid fullsync when not necessary.

2014-01-14T05:44:21+00:00

This is the raid10 equivalent of

commit 4f0a5e012cf41321d611e7cad63e1017d143d138
    MD RAID1: Further conditionalize 'fullsync'

If a device in a newly assembled array is not fully recovered we
currently do a fully resync by don't need to.

Signed-off-by: NeilBrown

md/raid10: fix bug when raid10 recovery fails to recover a block.

2014-01-14T05:44:08+00:00

commit e875ecea266a543e643b19e44cf472f1412708f9
    md/raid10 record bad blocks as needed during recovery.

added code to the "cannot recover this block" path to record a bad
block rather than fail the whole recovery.
Unfortunately this new case was placed *after* r10bio was freed rather
than *before*, yet it still uses r10bio.
This is will crash with a null dereference.

So move the freeing of r10bio down where it is safe.

Cc: stable@vger.kernel.org (v3.1+)
Fixes: e875ecea266a543e643b19e44cf472f1412708f9
Reported-by: Damian Nowak 
URL: https://bugzilla.kernel.org/show_bug.cgi?id=68181
Signed-off-by: NeilBrown

md/raid10: fix two bugs in handling of known-bad-blocks.

2014-01-14T05:44:07+00:00

If we discover a bad block when reading we split the request and
potentially read some of it from a different device.

The code path of this has two bugs in RAID10.
1/ we get a spin_lock with _irq, but unlock without _irq!!
2/ The calculation of 'sectors_handled' is wrong, as can be clearly
   seen by comparison with raid1.c

This leads to at least 2 warnings and a probable crash is a RAID10
ever had known bad blocks.

Cc: stable@vger.kernel.org (v3.1+)
Fixes: 856e08e23762dfb92ffc68fd0a8d228f9e152160
Reported-by: Damian Nowak 
URL: https://bugzilla.kernel.org/show_bug.cgi?id=68181
Signed-off-by: NeilBrown