linux-stable.git/drivers/md/raid1.c, branch v5.3.4

md/raid1: fail run raid1 array when active disk less than one

2019-10-05T13:12:03+00:00

[ Upstream commit 07f1a6850c5d5a65c917c3165692b5179ac4cb6b ]

When run test case:
  mdadm -CR /dev/md1 -l 1 -n 4 /dev/sd[a-d] --assume-clean --bitmap=internal
  mdadm -S /dev/md1
  mdadm -A /dev/md1 /dev/sd[b-c] --run --force

  mdadm --zero /dev/sda
  mdadm /dev/md1 -a /dev/sda

  echo offline > /sys/block/sdc/device/state
  echo offline > /sys/block/sdb/device/state
  sleep 5
  mdadm -S /dev/md1

  echo running > /sys/block/sdb/device/state
  echo running > /sys/block/sdc/device/state
  mdadm -A /dev/md1 /dev/sd[a-c] --run --force

mdadm run fail with kernel message as follow:
[  172.986064] md: kicking non-fresh sdb from array!
[  173.004210] md: kicking non-fresh sdc from array!
[  173.022383] md/raid1:md1: active with 0 out of 4 mirrors
[  173.022406] md1: failed to create bitmap (-5)

In fact, when active disk in raid1 array less than one, we
need to return fail in raid1_run().

Reviewed-by: NeilBrown 
Signed-off-by: Yufen Yu 
Signed-off-by: Song Liu 
Signed-off-by: Sasha Levin

md/raid1: end bio when the device faulty

2019-10-05T13:11:35+00:00

[ Upstream commit eeba6809d8d58908b5ed1b5ceb5fcb09a98a7cad ]

When write bio return error, it would be added to conf->retry_list
and wait for raid1d thread to retry write and acknowledge badblocks.

In narrow_write_error(), the error bio will be split in the unit of
badblock shift (such as one sector) and raid1d thread issues them
one by one. Until all of the splited bio has finished, raid1d thread
can go on processing other things, which is time consuming.

But, there is a scene for error handling that is not necessary.
When the device has been set faulty, flush_bio_list() may end
bios in pending_bio_list with error status. Since these bios
has not been issued to the device actually, error handlding to
retry write and acknowledge badblocks make no sense.

Even without that scene, when the device is faulty, badblocks info
can not be written out to the device. Thus, we also no need to
handle the error IO.

Signed-off-by: Yufen Yu 
Signed-off-by: Song Liu 
Signed-off-by: Sasha Levin

md/raid1: Fix a warning message in remove_wb()

2019-06-26T19:18:48+00:00

The WARN_ON() macro doesn't take an error message, it just takes a
condition.  I've changed this to use WARN(1, "...") instead.

Fixes: 3e148a320979 ("md/raid1: fix potential data inconsistency issue with write behind device")
Signed-off-by: Dan Carpenter 
Signed-off-by: Song Liu

md/raid1: fix potential data inconsistency issue with write behind device

2019-06-20T23:35:59+00:00

For write-behind mode, we think write IO is complete once it has
reached all the non-writemostly devices. It works fine for single
queue devices.

But for multiqueue device, if there are lots of IOs come from upper
layer, then the write-behind device could issue those IOs to different
queues, depends on the each queue's delay, so there is no guarantee
that those IOs can arrive in order.

To address the issue, we need to check the collision among write
behind IOs, we can only continue without collision, otherwise wait
for the completion of previous collisioned IO.

And WBCollision is introduced for multiqueue device which is worked
under write-behind mode.

But this patch doesn't handle below cases which could have the data
inconsistency issue as well, these cases will be handled in later
patches.

1. modify max_write_behind by write backlog node.
2. add or remove array's bitmap dynamically.
3. the change of member disk.

Reviewed-by: NeilBrown 
Signed-off-by: Guoqing Jiang 
Signed-off-by: Song Liu

md: raid1-10: Unify r{1,10}bio_pool_free

2019-06-15T07:37:35+00:00

Avoiding duplicated code, since they just execute a kfree.

Signed-off-by: Marcos Paulo de Souza 
Signed-off-by: Jens Axboe

md/raid1: get rid of extra blank line and space

2019-06-15T07:37:34+00:00

This patch get rid of extra blank line and space, and
add necessary space for code.

Signed-off-by: Yufen Yu 
Signed-off-by: Song Liu 
Signed-off-by: Jens Axboe

drivers: md: Unify common definitions of raid1 and raid10

2019-06-15T07:37:34+00:00

These definitions are being moved to raid1-10.c.

Signed-off-by: Marcos Paulo de Souza 
Signed-off-by: Song Liu 
Signed-off-by: Jens Axboe

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 47

2019-05-24T15:27:13+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 or at your option any
  later version you should have received a copy of the gnu general
  public license for example usr src linux copying if not write to the
  free software foundation inc 675 mass ave cambridge ma 02139 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 20 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Reviewed-by: Kate Stewart 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520170858.552543146@linutronix.de
Signed-off-by: Greg Kroah-Hartman

block: remove the i argument to bio_for_each_segment_all

2019-04-30T15:26:13+00:00

We only have two callers that need the integer loop iterator, and they
can easily maintain it themselves.

Suggested-by: Matthew Wilcox 
Reviewed-by: Johannes Thumshirn 
Acked-by: David Sterba 
Reviewed-by: Hannes Reinecke 
Acked-by: Coly Li 
Reviewed-by: Matthew Wilcox 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Jens Axboe

Merge tag 'for-5.1/block-20190302' of git://git.kernel.dk/linux-block

2019-03-08T22:12:17+00:00

Pull block layer updates from Jens Axboe:
 "Not a huge amount of changes in this round, the biggest one is that we
  finally have Mings multi-page bvec support merged. Apart from that,
  this pull request contains:

   - Small series that avoids quiescing the queue for sysfs changes that
     match what we currently have (Aleksei)

   - Series of bcache fixes (via Coly)

   - Series of lightnvm fixes (via Mathias)

   - NVMe pull request from Christoph. Nothing major, just SPDX/license
     cleanups, RR mp policy (Hannes), and little fixes (Bart,
     Chaitanya).

   - BFQ series (Paolo)

   - Save blk-mq cpu -> hw queue mapping, removing a pointer indirection
     for the fast path (Jianchao)

   - fops->iopoll() added for async IO polling, this is a feature that
     the upcoming io_uring interface will use (Christoph, me)

   - Partition scan loop fixes (Dongli)

   - mtip32xx conversion from managed resource API (Christoph)

   - cdrom registration race fix (Guenter)

   - MD pull from Song, two minor fixes.

   - Various documentation fixes (Marcos)

   - Multi-page bvec feature. This brings a lot of nice improvements
     with it, like more efficient splitting, larger IOs can be supported
     without growing the bvec table size, and so on. (Ming)

   - Various little fixes to core and drivers"

* tag 'for-5.1/block-20190302' of git://git.kernel.dk/linux-block: (117 commits)
  block: fix updating bio's front segment size
  block: Replace function name in string with __func__
  nbd: propagate genlmsg_reply return code
  floppy: remove set but not used variable 'q'
  null_blk: fix checking for REQ_FUA
  block: fix NULL pointer dereference in register_disk
  fs: fix guard_bio_eod to check for real EOD errors
  blk-mq: use HCTX_TYPE_DEFAULT but not 0 to index blk_mq_tag_set->map
  block: optimize bvec iteration in bvec_iter_advance
  block: introduce mp_bvec_for_each_page() for iterating over page
  block: optimize blk_bio_segment_split for single-page bvec
  block: optimize __blk_segment_map_sg() for single-page bvec
  block: introduce bvec_nth_page()
  iomap: wire up the iopoll method
  block: add bio_set_polled() helper
  block: wire up block device iopoll method
  fs: add an iopoll method to struct file_operations
  loop: set GENHD_FL_NO_PART_SCAN after blkdev_reread_part()
  loop: do not print warn message if partition scan is successful
  block: bounce: make sure that bvec table is updated
  ...