linux-stable.git/drivers/md/bcache, branch v5.10.78

bcache: add proper error unwinding in bcache_device_init

2021-09-15T07:50:25+00:00

[ Upstream commit 224b0683228c5f332f9cee615d85e75e9a347170 ]

Except for the IDA none of the allocations in bcache_device_init is
unwound on error, fix that.

Signed-off-by: Christoph Hellwig 
Acked-by: Coly Li 
Link: https://lore.kernel.org/r/20210809064028.1198327-7-hch@lst.de
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

bcache: Move journal work to new flush wq

2021-03-04T10:38:26+00:00

commit afe78ab46f638ecdf80a35b122ffc92c20d9ae5d upstream.

This is potentially long running and not latency sensitive, let's get
it out of the way of other latency sensitive events.

As observed in the previous commit, the `system_wq` comes easily
congested by bcache, and this fixes a few more stalls I was observing
every once in a while.

Let's not make this `WQ_MEM_RECLAIM` as it showed to reduce performance
of boot and file system operations in my tests. Also, without
`WQ_MEM_RECLAIM`, I no longer see desktop stalls. This matches the
previous behavior as `system_wq` also does no memory reclaim:

> // workqueue.c:
> system_wq = alloc_workqueue("events", 0, 0);

Cc: Coly Li 
Cc: stable@vger.kernel.org # 5.4+
Signed-off-by: Kai Krakow 
Signed-off-by: Coly Li 
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

bcache: Give btree_io_wq correct semantics again

2021-03-04T10:38:26+00:00

commit d797bd9897e3559eb48d68368550d637d32e468c upstream.

Before killing `btree_io_wq`, the queue was allocated using
`create_singlethread_workqueue()` which has `WQ_MEM_RECLAIM`. After
killing it, it no longer had this property but `system_wq` is not
single threaded.

Let's combine both worlds and make it multi threaded but able to
reclaim memory.

Cc: Coly Li 
Cc: stable@vger.kernel.org # 5.4+
Signed-off-by: Kai Krakow 
Signed-off-by: Coly Li 
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

Revert "bcache: Kill btree_io_wq"

2021-03-04T10:38:26+00:00

commit 9f233ffe02e5cef611100cd8c5bcf4de26ca7bef upstream.

This reverts commit 56b30770b27d54d68ad51eccc6d888282b568cee.

With the btree using the `system_wq`, I seem to see a lot more desktop
latency than I should.

After some more investigation, it looks like the original assumption
of 56b3077 no longer is true, and bcache has a very high potential of
congesting the `system_wq`. In turn, this introduces laggy desktop
performance, IO stalls (at least with btrfs), and input events may be
delayed.

So let's revert this. It's important to note that the semantics of
using `system_wq` previously mean that `btree_io_wq` should be created
before and destroyed after other bcache wqs to keep the same
assumptions.

Cc: Coly Li 
Cc: stable@vger.kernel.org # 5.4+
Signed-off-by: Kai Krakow 
Signed-off-by: Coly Li 
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

bcache: only check feature sets when sb->version >= BCACHE_SB_VERSION_CDEV_WITH_FEATURES

2021-02-03T22:28:39+00:00

commit 0df28cad06eb41cc36bfea69d9c882fb567fd0d6 upstream.

For super block version < BCACHE_SB_VERSION_CDEV_WITH_FEATURES, it
doesn't make sense to check the feature sets. This patch checks
super block version in bch_has_feature_* routines, if the version
doesn't have feature sets yet, returns 0 (false) to the caller.

Fixes: 5342fd425502 ("bcache: set bcache device into read-only mode for BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET")
Fixes: ffa470327572 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket")
Cc: stable@vger.kernel.org # 5.9+
Reported-and-tested-by: Bockholdt Arne 
Signed-off-by: Coly Li 
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

bcache: set bcache device into read-only mode for BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET

2021-01-17T13:17:01+00:00

commit 5342fd4255021ef0c4ce7be52eea1c4ebda11c63 upstream.

If BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET is set in incompat feature
set, it means the cache device is created with obsoleted layout with
obso_bucket_site_hi. Now bcache does not support this feature bit, a new
BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE incompat feature bit is added
for a better layout to support large bucket size.

For the legacy compatibility purpose, if a cache device created with
obsoleted BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET feature bit, all bcache
devices attached to this cache set should be set to read-only. Then the
dirty data can be written back to backing device before re-create the
cache device with BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE feature bit
by the latest bcache-tools.

This patch checks BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET feature bit
when running a cache set and attach a bcache device to the cache set. If
this bit is set,
- When run a cache set, print an error kernel message to indicate all
following attached bcache device will be read-only.
- When attach a bcache device, print an error kernel message to indicate
the attached bcache device will be read-only, and ask users to update
to latest bcache-tools.

Such change is only for cache device whose bucket size >= 32MB, this is
for the zoned SSD and almost nobody uses such large bucket size at this
moment. If you don't explicit set a large bucket size for a zoned SSD,
such change is totally transparent to your bcache device.

Fixes: ffa470327572 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket")
Signed-off-by: Coly Li
Signed-off-by: Jens Axboe
Signed-off-by: Greg Kroah-Hartman

bcache: introduce BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE for large bucket

2021-01-12T19:18:25+00:00

commit b16671e8f493e3df40b1fb0dff4078f391c5099a upstream.

When large bucket feature was added, BCH_FEATURE_INCOMPAT_LARGE_BUCKET
was introduced into the incompat feature set. It used bucket_size_hi
(which was added at the tail of struct cache_sb_disk) to extend current
16bit bucket size to 32bit with existing bucket_size in struct
cache_sb_disk.

This is not a good idea, there are two obvious problems,
- Bucket size is always value power of 2, if store log2(bucket size) in
  existing bucket_size of struct cache_sb_disk, it is unnecessary to add
  bucket_size_hi.
- Macro csum_set() assumes d[SB_JOURNAL_BUCKETS] is the last member in
  struct cache_sb_disk, bucket_size_hi was added after d[] which makes
  csum_set calculate an unexpected super block checksum.

To fix the above problems, this patch introduces a new incompat feature
bit BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE, when this bit is set, it
means bucket_size in struct cache_sb_disk stores the order of power-of-2
bucket size value. When user specifies a bucket size larger than 32768
sectors, BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE will be set to
incompat feature set, and bucket_size stores log2(bucket size) more
than store the real bucket size value.

The obsoleted BCH_FEATURE_INCOMPAT_LARGE_BUCKET won't be used anymore,
it is renamed to BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET and still only
recognized by kernel driver for legacy compatible purpose. The previous
bucket_size_hi is renmaed to obso_bucket_size_hi in struct cache_sb_disk
and not used in bcache-tools anymore.

For cache device created with BCH_FEATURE_INCOMPAT_LARGE_BUCKET feature,
bcache-tools and kernel driver still recognize the feature string and
display it as "obso_large_bucket".

With this change, the unnecessary extra space extend of bcache on-disk
super block can be avoided, and csum_set() may generate expected check
sum as well.

Fixes: ffa470327572 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket")
Signed-off-by: Coly Li 
Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

bcache: check unsupported feature sets for bcache register

2021-01-12T19:18:25+00:00

commit 1dfc0686c29a9bbd3a446a29f9ccde3dec3bc75a upstream.

This patch adds the check for features which is incompatible for
current supported feature sets.

Now if the bcache device created by bcache-tools has features that
current kernel doesn't support, read_super() will fail with error
messoage. E.g. if an unsupported incompatible feature detected,
bcache register will fail with dmesg "bcache: register_bcache() error :
Unsupported incompatible feature found".

Fixes: d721a43ff69c ("bcache: increase super block version for cache device and backing device")
Fixes: ffa470327572 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket")
Signed-off-by: Coly Li 
Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

bcache: fix typo from SUUP to SUPP in features.h

2021-01-12T19:18:25+00:00

commit f7b4943dea48a572ad751ce1f18a245d43debe7e upstream.

This patch fixes the following typos,
from BCH_FEATURE_COMPAT_SUUP to BCH_FEATURE_COMPAT_SUPP
from BCH_FEATURE_INCOMPAT_SUUP to BCH_FEATURE_INCOMPAT_SUPP
from BCH_FEATURE_INCOMPAT_SUUP to BCH_FEATURE_RO_COMPAT_SUPP

Fixes: d721a43ff69c ("bcache: increase super block version for cache device and backing device")
Fixes: ffa470327572 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket")
Signed-off-by: Coly Li 
Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

bcache: remove embedded struct cache_sb from struct cache_set

2020-10-02T20:25:30+00:00

Since bcache code was merged into mainline kerrnel, each cache set only
as one single cache in it. The multiple caches framework is here but the
code is far from completed. Considering the multiple copies of cached
data can also be stored on e.g. md raid1 devices, it is unnecessary to
support multiple caches in one cache set indeed.

The previous preparation patches fix the dependencies of explicitly
making a cache set only have single cache. Now we don't have to maintain
an embedded partial super block in struct cache_set, the in-memory super
block can be directly referenced from struct cache.

This patch removes the embedded struct cache_sb from struct cache_set,
and fixes all locations where the superb lock was referenced from this
removed super block by referencing the in-memory super block of struct
cache.

Signed-off-by: Coly Li 
Reviewed-by: Hannes Reinecke 
Signed-off-by: Jens Axboe