linux-stable.git/drivers/md/bcache/writeback.h, branch linux-4.9.y

bcache: never writeback a discard operation

2019-03-23T12:19:53+00:00

commit 9951379b0ca88c95876ad9778b9099e19a95d566 upstream.

Some users see panics like the following when performing fstrim on a
bcached volume:

[  529.803060] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[  530.183928] #PF error: [normal kernel read fault]
[  530.412392] PGD 8000001f42163067 P4D 8000001f42163067 PUD 1f42168067 PMD 0
[  530.750887] Oops: 0000 [#1] SMP PTI
[  530.920869] CPU: 10 PID: 4167 Comm: fstrim Kdump: loaded Not tainted 5.0.0-rc1+ #3
[  531.290204] Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9, BIOS P89 12/27/2015
[  531.693137] RIP: 0010:blk_queue_split+0x148/0x620
[  531.922205] Code: 60 38 89 55 a0 45 31 db 45 31 f6 45 31 c9 31 ff 89 4d 98 85 db 0f 84 7f 04 00 00 44 8b 6d 98 4c 89 ee 48 c1 e6 04 49 03 70 78 <8b> 46 08 44 8b 56 0c 48
8b 16 44 29 e0 39 d8 48 89 55 a8 0f 47 c3
[  532.838634] RSP: 0018:ffffb9b708df39b0 EFLAGS: 00010246
[  533.093571] RAX: 00000000ffffffff RBX: 0000000000046000 RCX: 0000000000000000
[  533.441865] RDX: 0000000000000200 RSI: 0000000000000000 RDI: 0000000000000000
[  533.789922] RBP: ffffb9b708df3a48 R08: ffff940d3b3fdd20 R09: 0000000000000000
[  534.137512] R10: ffffb9b708df3958 R11: 0000000000000000 R12: 0000000000000000
[  534.485329] R13: 0000000000000000 R14: 0000000000000000 R15: ffff940d39212020
[  534.833319] FS:  00007efec26e3840(0000) GS:ffff940d1f480000(0000) knlGS:0000000000000000
[  535.224098] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  535.504318] CR2: 0000000000000008 CR3: 0000001f4e256004 CR4: 00000000001606e0
[  535.851759] Call Trace:
[  535.970308]  ? mempool_alloc_slab+0x15/0x20
[  536.174152]  ? bch_data_insert+0x42/0xd0 [bcache]
[  536.403399]  blk_mq_make_request+0x97/0x4f0
[  536.607036]  generic_make_request+0x1e2/0x410
[  536.819164]  submit_bio+0x73/0x150
[  536.980168]  ? submit_bio+0x73/0x150
[  537.149731]  ? bio_associate_blkg_from_css+0x3b/0x60
[  537.391595]  ? _cond_resched+0x1a/0x50
[  537.573774]  submit_bio_wait+0x59/0x90
[  537.756105]  blkdev_issue_discard+0x80/0xd0
[  537.959590]  ext4_trim_fs+0x4a9/0x9e0
[  538.137636]  ? ext4_trim_fs+0x4a9/0x9e0
[  538.324087]  ext4_ioctl+0xea4/0x1530
[  538.497712]  ? _copy_to_user+0x2a/0x40
[  538.679632]  do_vfs_ioctl+0xa6/0x600
[  538.853127]  ? __do_sys_newfstat+0x44/0x70
[  539.051951]  ksys_ioctl+0x6d/0x80
[  539.212785]  __x64_sys_ioctl+0x1a/0x20
[  539.394918]  do_syscall_64+0x5a/0x110
[  539.568674]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

We have observed it where both:
1) LVM/devmapper is involved (bcache backing device is LVM volume) and
2) writeback cache is involved (bcache cache_mode is writeback)

On one machine, we can reliably reproduce it with:

 # echo writeback > /sys/block/bcache0/bcache/cache_mode
   (not sure whether above line is required)
 # mount /dev/bcache0 /test
 # for i in {0..10}; do
	file="$(mktemp /test/zero.XXX)"
	dd if=/dev/zero of="$file" bs=1M count=256
	sync
	rm $file
    done
  # fstrim -v /test

Observing this with tracepoints on, we see the following writes:

fstrim-18019 [022] .... 91107.302026: bcache_write: 73f95583-561c-408f-a93a-4cbd2498f5c8 inode 0  DS 4260112 + 196352 hit 0 bypass 1
fstrim-18019 [022] .... 91107.302050: bcache_write: 73f95583-561c-408f-a93a-4cbd2498f5c8 inode 0  DS 4456464 + 262144 hit 0 bypass 1
fstrim-18019 [022] .... 91107.302075: bcache_write: 73f95583-561c-408f-a93a-4cbd2498f5c8 inode 0  DS 4718608 + 81920 hit 0 bypass 1
fstrim-18019 [022] .... 91107.302094: bcache_write: 73f95583-561c-408f-a93a-4cbd2498f5c8 inode 0  DS 5324816 + 180224 hit 0 bypass 1
fstrim-18019 [022] .... 91107.302121: bcache_write: 73f95583-561c-408f-a93a-4cbd2498f5c8 inode 0  DS 5505040 + 262144 hit 0 bypass 1
fstrim-18019 [022] .... 91107.302145: bcache_write: 73f95583-561c-408f-a93a-4cbd2498f5c8 inode 0  DS 5767184 + 81920 hit 0 bypass 1
fstrim-18019 [022] .... 91107.308777: bcache_write: 73f95583-561c-408f-a93a-4cbd2498f5c8 inode 0  DS 6373392 + 180224 hit 1 bypass 0


Note the final one has different hit/bypass flags.

This is because in should_writeback(), we were hitting a case where
the partial stripe condition was returning true and so
should_writeback() was returning true early.

If that hadn't been the case, it would have hit the would_skip test, and
as would_skip == s->iop.bypass == true, should_writeback() would have
returned false.

Looking at the git history from 'commit 72c270612bd3 ("bcache: Write out
full stripes")', it looks like the idea was to optimise for raid5/6:

       * If a stripe is already dirty, force writes to that stripe to
	 writeback mode - to help build up full stripes of dirty data

To fix this issue, make sure that should_writeback() on a discard op
never returns true.

More details of debugging:
https://www.spinics.net/lists/linux-bcache/msg06996.html

Previous reports:
 - https://bugzilla.kernel.org/show_bug.cgi?id=201051
 - https://bugzilla.kernel.org/show_bug.cgi?id=196103
 - https://www.spinics.net/lists/linux-bcache/msg06885.html

(Coly Li: minor modification to follow maximum 75 chars per line rule)

Cc: Kent Overstreet 
Cc: stable@vger.kernel.org
Fixes: 72c270612bd3 ("bcache: Write out full stripes")
Signed-off-by: Daniel Axtens 
Signed-off-by: Coly Li 
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

bcache: correct cache_dirty_target in __update_writeback_rate()

2017-09-27T12:39:24+00:00

commit a8394090a9129b40f9d90dcb7f4a49d60c727ca6 upstream.

__update_write_rate() uses a Proportion-Differentiation Controller
algorithm to control writeback rate. A dirty target number is used in
this PD controller to control writeback rate. A larger target number
will make the writeback rate smaller, on the versus, a smaller target
number will make the writeback rate larger.

bcache uses the following steps to calculate the target number,
1) cache_sectors = all-buckets-of-cache-set * buckets-size
2) cache_dirty_target = cache_sectors * cached-device-writeback_percent
3) target = cache_dirty_target *
(sectors-of-cached-device/sectors-of-all-cached-devices-of-this-cache-set)

The calculation at step 1) for cache_sectors is incorrect, which does
not consider dirty blocks occupied by flash only volume.

A flash only volume can be took as a bcache device without cached
device. All data sectors allocated for it are persistent on cache device
and marked dirty, they are not touched by bcache writeback and garbage
collection code. So data blocks of flash only volume should be ignore
when calculating cache_sectors of cache set.

Current code does not subtract dirty sectors of flash only volume, which
results a larger target number from the above 3 steps. And in sequence
the cache device's writeback rate is smaller then a correct value,
writeback speed is slower on all cached devices.

This patch fixes the incorrect slower writeback rate by subtracting
dirty sectors of flash only volumes in __update_writeback_rate().

(Commit log composed by Coly Li to pass checkpatch.pl checking)

Signed-off-by: Tang Junhui 
Reviewed-by: Coly Li 
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

bcache: initialize dirty stripes in flash_dev_run()

2017-09-27T12:39:24+00:00

commit 175206cf9ab63161dec74d9cd7f9992e062491f5 upstream.

bcache uses a Proportion-Differentiation Controller algorithm to control
writeback rate to cached devices. In the PD controller algorithm, dirty
stripes of thin flash device should not be counted in, because flash only
volumes never write back dirty data.

Currently dirty stripe counter for thin flash device is not initialized
when the thin flash device starts. Which means the following calculation
in PD controller will reference an undefined dirty stripes number, and
all cached devices attached to the same cache set where the thin flash
device lies on may have an inaccurate writeback rate.

This patch calles bch_sectors_dirty_init() in flash_dev_run(), to
correctly initialize dirty stripe counter when the thin flash device
starts to run. This patch also does following parameter data type change,
 -void bch_sectors_dirty_init(struct cached_dev *dc);
 +void bch_sectors_dirty_init(struct bcache_device *);
to call this function conveniently in flash_dev_run().

(Commit log is composed by Coly Li)

Signed-off-by: Tang Junhui 
Reviewed-by: Coly Li 
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

block: rename bio bi_rw to bi_opf

2016-08-07T20:41:02+00:00

Since commit 63a4cc24867d, bio->bi_rw contains flags in the lower
portion and the op code in the higher portions. This means that
old code that relies on manually setting bi_rw is most likely
going to be broken. Instead of letting that brokeness linger,
rename the member, to force old and out-of-tree code to break
at compile time instead of at runtime.

No intended functional changes in this commit.

Signed-off-by: Jens Axboe

bcache: prevent crash on changing writeback_running

2015-12-31T03:23:14+00:00

Added a safeguard in the shutdown case. At least while not being
attached it is also possible to trigger a kernel bug by writing into
writeback_running. This change  adds the same check before trying to
wake up the thread for that case.

Signed-off-by: Stefan Bader 
Cc: Kent Overstreet 
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe

bcache: fix uninterruptible sleep in writeback thread

2014-08-04T22:23:03+00:00

There were two issues here:

- writeback thread did not start until the device first became dirty
- writeback thread used uninterruptible sleep once running

Without this patch I see kernel warnings printed and a load average of
1.52 after booting my test VM. With this patch the warnings are gone and
the load average is near 0.00 as expected.

Signed-off-by: Kent Overstreet

block: Abstract out bvec iterator

2013-11-24T06:33:47+00:00

Immutable biovecs are going to require an explicit iterator. To
implement immutable bvecs, a later patch is going to add a bi_bvec_done
member to this struct; for now, this patch effectively just renames
things.

Signed-off-by: Kent Overstreet 
Cc: Jens Axboe 
Cc: Geert Uytterhoeven 
Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Cc: "Ed L. Cashin" 
Cc: Nick Piggin 
Cc: Lars Ellenberg 
Cc: Jiri Kosina 
Cc: Matthew Wilcox 
Cc: Geoff Levand 
Cc: Yehuda Sadeh 
Cc: Sage Weil 
Cc: Alex Elder 
Cc: ceph-devel@vger.kernel.org
Cc: Joshua Morris 
Cc: Philip Kelleher 
Cc: Rusty Russell 
Cc: "Michael S. Tsirkin" 
Cc: Konrad Rzeszutek Wilk 
Cc: Jeremy Fitzhardinge 
Cc: Neil Brown 
Cc: Alasdair Kergon 
Cc: Mike Snitzer 
Cc: dm-devel@redhat.com
Cc: Martin Schwidefsky 
Cc: Heiko Carstens 
Cc: linux390@de.ibm.com
Cc: Boaz Harrosh 
Cc: Benny Halevy 
Cc: "James E.J. Bottomley" 
Cc: Greg Kroah-Hartman 
Cc: "Nicholas A. Bellinger" 
Cc: Alexander Viro 
Cc: Chris Mason 
Cc: "Theodore Ts'o" 
Cc: Andreas Dilger 
Cc: Jaegeuk Kim 
Cc: Steven Whitehouse 
Cc: Dave Kleikamp 
Cc: Joern Engel 
Cc: Prasad Joshi 
Cc: Trond Myklebust 
Cc: KONISHI Ryusuke 
Cc: Mark Fasheh 
Cc: Joel Becker 
Cc: Ben Myers 
Cc: xfs@oss.sgi.com
Cc: Steven Rostedt 
Cc: Frederic Weisbecker 
Cc: Ingo Molnar 
Cc: Len Brown 
Cc: Pavel Machek 
Cc: "Rafael J. Wysocki" 
Cc: Herton Ronaldo Krzesinski 
Cc: Ben Hutchings 
Cc: Andrew Morton 
Cc: Guo Chao 
Cc: Tejun Heo 
Cc: Asai Thambi S P 
Cc: Selvan Mani 
Cc: Sam Bradshaw 
Cc: Wei Yongjun 
Cc: "Roger Pau Monné" 
Cc: Jan Beulich 
Cc: Stefano Stabellini 
Cc: Ian Campbell 
Cc: Sebastian Ott 
Cc: Christian Borntraeger 
Cc: Minchan Kim 
Cc: Jiang Liu 
Cc: Nitin Gupta 
Cc: Jerome Marchand 
Cc: Joe Perches 
Cc: Peng Tao 
Cc: Andy Adamson 
Cc: fanchaoting 
Cc: Jie Liu 
Cc: Sunil Mushran 
Cc: "Martin K. Petersen" 
Cc: Namjae Jeon 
Cc: Pankaj Kumar 
Cc: Dan Magenheimer 
Cc: Mel Gorman 6

bcache: Fix sysfs splat on shutdown with flash only devs

2013-11-11T05:56:41+00:00

Whoops.

Signed-off-by: Kent Overstreet

bcache: Better full stripe scanning

2013-11-11T05:56:41+00:00

The old scanning-by-stripe code burned too much CPU, this should be
better.

Signed-off-by: Kent Overstreet

bcache: Convert writeback to a kthread

2013-11-11T05:56:05+00:00

This simplifies the writeback flow control quite a bit - previously, it
was conceptually two coroutines, refill_dirty() and read_dirty(). This
makes the code quite a bit more straightforward.

Signed-off-by: Kent Overstreet