linux-stable.git/drivers/md/bcache/request.c, branch v5.10

bcache: remove embedded struct cache_sb from struct cache_set

2020-10-02T20:25:30+00:00

Since bcache code was merged into mainline kerrnel, each cache set only
as one single cache in it. The multiple caches framework is here but the
code is far from completed. Considering the multiple copies of cached
data can also be stored on e.g. md raid1 devices, it is unnecessary to
support multiple caches in one cache set indeed.

The previous preparation patches fix the dependencies of explicitly
making a cache set only have single cache. Now we don't have to maintain
an embedded partial super block in struct cache_set, the in-memory super
block can be directly referenced from struct cache.

This patch removes the embedded struct cache_sb from struct cache_set,
and fixes all locations where the superb lock was referenced from this
removed super block by referencing the in-memory super block of struct
cache.

Signed-off-by: Coly Li 
Reviewed-by: Hannes Reinecke 
Signed-off-by: Jens Axboe

bcache: only use block_bytes() on struct cache

2020-10-02T20:25:30+00:00

Because struct cache_set and struct cache both have struct cache_sb,
therefore macro block_bytes() can be used on both of them. When removing
the embedded struct cache_sb from struct cache_set, this macro won't be
used on struct cache_set anymore.

This patch unifies all block_bytes() usage only on struct cache, this is
one of the preparation to remove the embedded struct cache_sb from
struct cache_set.

Signed-off-by: Coly Li 
Reviewed-by: Hannes Reinecke 
Signed-off-by: Jens Axboe

bcache: use part_[begin|end]_io_acct instead of disk_[begin|end]_io_acct

2020-09-11T22:41:30+00:00

This enables proper statistics in /proc/diskstats for bcache partitions.

Signed-off-by: Song Liu 
Reviewed-by: Coly Li 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Jens Axboe

Merge tag 'for-5.9/drivers-20200803' of git://git.kernel.dk/linux-block

2020-08-05T17:51:40+00:00

Pull block driver updates from Jens Axboe:

 - NVMe:
      - ZNS support (Aravind, Keith, Matias, Niklas)
      - Misc cleanups, optimizations, fixes (Baolin, Chaitanya, David,
        Dongli, Max, Sagi)

 - null_blk zone capacity support (Aravind)

 - MD:
      - raid5/6 fixes (ChangSyun)
      - Warning fixes (Damien)
      - raid5 stripe fixes (Guoqing, Song, Yufen)
      - sysfs deadlock fix (Junxiao)
      - raid10 deadlock fix (Vitaly)

 - struct_size conversions (Gustavo)

 - Set of bcache updates/fixes (Coly)

* tag 'for-5.9/drivers-20200803' of git://git.kernel.dk/linux-block: (117 commits)
  md/raid5: Allow degraded raid6 to do rmw
  md/raid5: Fix Force reconstruct-write io stuck in degraded raid5
  raid5: don't duplicate code for different paths in handle_stripe
  raid5-cache: hold spinlock instead of mutex in r5c_journal_mode_show
  md: print errno in super_written
  md/raid5: remove the redundant setting of STRIPE_HANDLE
  md: register new md sysfs file 'uuid' read-only
  md: fix max sectors calculation for super 1.0
  nvme-loop: remove extra variable in create ctrl
  nvme-loop: set ctrl state connecting after init
  nvme-multipath: do not fall back to __nvme_find_path() for non-optimized paths
  nvme-multipath: fix logic for non-optimized paths
  nvme-rdma: fix controller reset hang during traffic
  nvme-tcp: fix controller reset hang during traffic
  nvmet: introduce the passthru Kconfig option
  nvmet: introduce the passthru configfs interface
  nvmet: Add passthru enable/disable helpers
  nvmet: add passthru code to process commands
  nvme: export nvme_find_get_ns() and nvme_put_ns()
  nvme: introduce nvme_ctrl_get_by_path()
  ...

bcache: use disk_{start,end}_io_acct() to count I/O for bcache device

2020-07-28T15:14:52+00:00

This patch is a fix to patch "bcache: fix bio_{start,end}_io_acct with
proper device". The previous patch uses a hack to temporarily set
bi_disk to bcache device, which is mistaken too.

As Christoph suggests, this patch uses disk_{start,end}_io_acct() to
count I/O for bcache device in the correct way.

Fixes: 85750aeb748f ("bcache: use bio_{start,end}_io_acct")
Signed-off-by: Coly Li 
Cc: Christoph Hellwig 
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe

bcache: fix bio_{start,end}_io_acct with proper device

2020-07-25T13:38:21+00:00

Commit 85750aeb748f ("bcache: use bio_{start,end}_io_acct") moves the
io account code to the location after bio_set_dev(bio, dc->bdev) in
cached_dev_make_request(). Then the account is performed incorrectly on
backing device, indeed the I/O should be counted to bcache device like
/dev/bcache0.

With the mistaken I/O account, iostat does not display I/O counts for
bcache device and all the numbers go to backing device. In writeback
mode, the hard drive may have 340K+ IOPS which is impossible and wrong
for spinning disk.

This patch introduces bch_bio_start_io_acct() and bch_bio_end_io_acct(),
which switches bio->bi_disk to bcache device before calling
bio_start_io_acct() or bio_end_io_acct(). Now the I/Os are counted to
bcache device, and bcache device, cache device and backing device have
their correct I/O count information back.

Fixes: 85750aeb748f ("bcache: use bio_{start,end}_io_acct")
Signed-off-by: Coly Li 
Cc: Christoph Hellwig 
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe

writeback: remove bdi->congested_fn

2020-07-08T23:20:46+00:00

Except for pktdvd, the only places setting congested bits are file
systems that allocate their own backing_dev_info structures.  And
pktdvd is a deprecated driver that isn't useful in stack setup
either.  So remove the dead congested_fn stacking infrastructure.

Signed-off-by: Christoph Hellwig 
Acked-by: Song Liu 
Acked-by: David Sterba 
[axboe: fixup unused variables in bcache/request.c]
Signed-off-by: Jens Axboe

block: rename generic_make_request to submit_bio_noacct

2020-07-01T13:27:24+00:00

generic_make_request has always been very confusingly misnamed, so rename
it to submit_bio_noacct to make it clear that it is submit_bio minus
accounting and a few checks.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Jens Axboe

block: move ->make_request_fn to struct block_device_operations

2020-07-01T13:27:24+00:00

The make_request_fn is a little weird in that it sits directly in
struct request_queue instead of an operation vector.  Replace it with
a block_device_operations method called submit_bio (which describes much
better what it does).  Also remove the request_queue argument to it, as
the queue can be derived pretty trivially from the bio.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Jens Axboe

Merge tag 'for-5.8/drivers-2020-06-01' of git://git.kernel.dk/linux-block

2020-06-02T22:37:03+00:00

Pull block driver updates from Jens Axboe:
 "On top of the core changes, here are the block driver changes for this
  merge window:

   - NVMe changes:
        - NVMe over Fibre Channel protocol updates, which also reach
          over to drivers/scsi/lpfc (James Smart)
        - namespace revalidation support on the target (Anthony
          Iliopoulos)
        - gcc zero length array fix (Arnd Bergmann)
        - nvmet cleanups (Chaitanya Kulkarni)
        - misc cleanups and fixes (me, Keith Busch, Sagi Grimberg)
        - use a SRQ per completion vector (Max Gurtovoy)
        - fix handling of runtime changes to the queue count (Weiping
          Zhang)
        - t10 protection information support for nvme-rdma and
          nvmet-rdma (Israel Rukshin and Max Gurtovoy)
        - target side AEN improvements (Chaitanya Kulkarni)
        - various fixes and minor improvements all over, icluding the
          nvme part of the lpfc driver"

   - Floppy code cleanup series (Willy, Denis)

   - Floppy contention fix (Jiri)

   - Loop CONFIGURE support (Martijn)

   - bcache fixes/improvements (Coly, Joe, Colin)

   - q->queuedata cleanups (Christoph)

   - Get rid of ioctl_by_bdev (Christoph, Stefan)

   - md/raid5 allocation fixes (Coly)

   - zero length array fixes (Gustavo)

   - swim3 task state fix (Xu)"

* tag 'for-5.8/drivers-2020-06-01' of git://git.kernel.dk/linux-block: (166 commits)
  bcache: configure the asynchronous registertion to be experimental
  bcache: asynchronous devices registration
  bcache: fix refcount underflow in bcache_device_free()
  bcache: Convert pr_ uses to a more typical style
  bcache: remove redundant variables i and n
  lpfc: Fix return value in __lpfc_nvme_ls_abort
  lpfc: fix axchg pointer reference after free and double frees
  lpfc: Fix pointer checks and comments in LS receive refactoring
  nvme: set dma alignment to qword
  nvmet: cleanups the loop in nvmet_async_events_process
  nvmet: fix memory leak when removing namespaces and controllers concurrently
  nvmet-rdma: add metadata/T10-PI support
  nvmet: add metadata support for block devices
  nvmet: add metadata/T10-PI support
  nvme: add Metadata Capabilities enumerations
  nvmet: rename nvmet_check_data_len to nvmet_check_transfer_len
  nvmet: rename nvmet_rw_len to nvmet_rw_data_len
  nvmet: add metadata characteristics for a namespace
  nvme-rdma: add metadata/T10-PI support
  nvme-rdma: introduce nvme_rdma_sgl structure
  ...