[ Upstream commit b5984a9844fc45cd301a28fb56f3de95f7e20f3c ]

The system controller on PolarFire SoC has no interrupt to signify that
the TX has been completed. The interrupt instead signals that a service
requested by the mailbox client has succeeded. If a service fails, there
will be no interrupt delivered.

Switch to polling the busy register to determine whether transmission
has completed.

Fixes: 83d7b1560810 ("mbox: add polarfire soc system controller mailbox")
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Tested-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

commit f72f805e72882c361e2a612c64a6e549f3da7152 upstream.

If child mailbox node status is disabled it causes
crash in interrupt handler. Fix this by assigning
only available child node during driver probe.

Fixes: 4981b82ba2ff ("mailbox: ZynqMP IPI mailbox controller")
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230311012407.1292118-2-tanmay.shah@amd.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 74ad37a30ffee3643bc34f9ca7225b20a66abaaf upstream.

Multiple IPI channels are mapped to same interrupt handler.
Current isr implementation handles only one channel per isr.
Fix this behavior by checking isr status bit of all child
mailbox nodes.

Fixes: 4981b82ba2ff ("mailbox: ZynqMP IPI mailbox controller")
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230311012407.1292118-3-tanmay.shah@amd.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IPQ5332 has the APSS clock controller utilizing the same register space
as the APCS, so provide access to the APSS utilizing a child device like
other IPQ chipsets.

Like IPQ6018, the same controller and driver is used, so utilize IPQ6018
match data for IPQ5332.

Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

MSM8996 also has the clock-related part of the APCS mailbox device.
Follow the usual pattern and create a child device to handle these
clocks.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Using flexible array is more straight forward. It
  - saves 1 pointer in the 'zynqmp_ipi_pdata' structure
  - saves an indirection when using this array
  - saves some LoC and avoids some always spurious pointer arithmetic

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Pull mailbox updates from Jassi Brar:

 - qcom: enable sc8280xp, sm8550 and sm4250 support

 - ti: default to ARCH_K3 for msg manager

 - mediatek:
    - add mt8188 and mt8186 support
    - request irq only after got ready

 - zynq-ipi: fix error handling after device_register

 - mpfs: check sys-con status

 - rockchip: simplify by using device_get_match_data

* tag 'mailbox-v6.2' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  dt-bindings: mailbox: qcom-ipcc: Add compatible for SM8550
  mailbox: mtk-cmdq: Do not request irq until we are ready
  mailbox: zynq-ipi: fix error handling while device_register() fails
  mailbox: mtk-cmdq-mailbox: Use platform data directly instead of copying
  mailbox: arm_mhuv2: Fix return value check in mhuv2_probe()
  dt-bindings: mailbox: mediatek,gce-mailbox: add mt8188 compatible name
  dt-bindings: mailbox: add GCE header file for mt8188
  mailbox: mpfs: read the system controller's status
  mailbox: mtk-cmdq: add MT8186 support
  mailbox: mtk-cmdq: add gce ddr enable support flow
  mailbox: mtk-cmdq: add gce software ddr enable private data
  mailbox: mtk-cmdq: Use GCE_CTRL_BY_SW definition instead of number
  mailbox: rockchip: Use device_get_match_data() to simplify the code
  dt-bindings: mailbox: qcom-ipcc: Add sc8280xp compatible
  mailbox: config: ti-msgmgr: Default set to ARCH_K3 for TI msg manager
  mailbox: qcom-apcs-ipc: Add SM4250 APCS IPC support
  dt-bindings: mailbox: qcom: Add SM4250 APCS compatible

If the system comes from kexec() the peripheral might trigger an IRQ
befoe we are ready for it. Triggering a crash due to an access to
invalid memory.

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

If device_register() fails, it has two issues:
1. The name allocated by dev_set_name() is leaked.
2. The parent of device is not NULL, device_unregister() is called
   in zynqmp_ipi_free_mboxes(), it will lead a kernel crash because
   of removing not added device.

Call put_device() to give up the reference, so the name is freed in
kobject_cleanup(). Add device registered check in zynqmp_ipi_free_mboxes()
to avoid null-ptr-deref.

Fixes: 4981b82ba2ff ("mailbox: ZynqMP IPI mailbox controller")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Copying platform data to struct cmdq serves to no purpose, as that
data is never modified during runtime: it's worth at this point
storing a pointer to gce_plat in gce and.

Remove all duplicated `struct gce_plat` members from `struct gce`
and reuse the platform data across the driver to save some memory.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>