linux-stable.git/drivers/macintosh, branch v5.8

treewide: replace '---help---' in Kconfig files with 'help'

2020-06-13T16:57:21+00:00

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

  a) 4 spaces + '---help---'
  b) 7 spaces + '---help---'
  c) 8 spaces + '---help---'
  d) 1 space + 1 tab + '---help---'
  e) 1 tab + '---help---'    (correct indentation)
  f) 1 tab + 1 space + '---help---'
  g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

  $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada

mm: reorder includes after introduction of linux/pgtable.h

2020-06-09T16:39:13+00:00

The replacement of  with  made the include
of the latter in the middle of asm includes.  Fix this up with the aid of
the below script and manual adjustments here and there.

	import sys
	import re

	if len(sys.argv) is not 3:
	    print "USAGE: %s  " % (sys.argv[0])
	    sys.exit(1)

	hdr_to_move="#include " % sys.argv[2]
	moved = False
	in_hdrs = False

	with open(sys.argv[1], "r") as f:
	    lines = f.readlines()
	    for _line in lines:
		line = _line.rstrip('
')
		if line == hdr_to_move:
		    continue
		if line.startswith("#include 
Signed-off-by: Andrew Morton 
Cc: Arnd Bergmann 
Cc: Borislav Petkov 
Cc: Brian Cain 
Cc: Catalin Marinas 
Cc: Chris Zankel 
Cc: "David S. Miller" 
Cc: Geert Uytterhoeven 
Cc: Greentime Hu 
Cc: Greg Ungerer 
Cc: Guan Xuetao 
Cc: Guo Ren 
Cc: Heiko Carstens 
Cc: Helge Deller 
Cc: Ingo Molnar 
Cc: Ley Foon Tan 
Cc: Mark Salter 
Cc: Matthew Wilcox 
Cc: Matt Turner 
Cc: Max Filippov 
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Nick Hu 
Cc: Paul Walmsley 
Cc: Richard Weinberger 
Cc: Rich Felker 
Cc: Russell King 
Cc: Stafford Horne 
Cc: Thomas Bogendoerfer 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Cc: Vincent Chen 
Cc: Vineet Gupta 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org
Signed-off-by: Linus Torvalds

mm: introduce include/linux/pgtable.h

2020-06-09T16:39:13+00:00

The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.

Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and
make the latter include asm/pgtable.h.

Signed-off-by: Mike Rapoport 
Signed-off-by: Andrew Morton 
Cc: Arnd Bergmann 
Cc: Borislav Petkov 
Cc: Brian Cain 
Cc: Catalin Marinas 
Cc: Chris Zankel 
Cc: "David S. Miller" 
Cc: Geert Uytterhoeven 
Cc: Greentime Hu 
Cc: Greg Ungerer 
Cc: Guan Xuetao 
Cc: Guo Ren 
Cc: Heiko Carstens 
Cc: Helge Deller 
Cc: Ingo Molnar 
Cc: Ley Foon Tan 
Cc: Mark Salter 
Cc: Matthew Wilcox 
Cc: Matt Turner 
Cc: Max Filippov 
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Nick Hu 
Cc: Paul Walmsley 
Cc: Richard Weinberger 
Cc: Rich Felker 
Cc: Russell King 
Cc: Stafford Horne 
Cc: Thomas Bogendoerfer 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Cc: Vincent Chen 
Cc: Vineet Gupta 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org
Signed-off-by: Linus Torvalds

Merge tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2020-06-05T19:39:30+00:00

Pull powerpc updates from Michael Ellerman:

- Support for userspace to send requests directly to the on-chip GZIP
accelerator on Power9.

- Rework of our lockless page table walking (__find_linux_pte()) to
make it safe against parallel page table manipulations without
relying on an IPI for serialisation.

- A series of fixes & enhancements to make our machine check handling
more robust.

- Lots of plumbing to add support for "prefixed" (64-bit) instructions
on Power10.

- Support for using huge pages for the linear mapping on 8xx (32-bit).

- Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound
driver.

- Removal of some obsolete 40x platforms and associated cruft.

- Initial support for booting on Power10.

- Lots of other small features, cleanups & fixes.

Thanks to: Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan,
Andrey Abramov, Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent
Abali, Cédric Le Goater, Chen Zhou, Christian Zigotzky, Christophe
JAILLET, Christophe Leroy, Dmitry Torokhov, Emmanuel Nicolet, Erhard F.,
Gautham R. Shenoy, Geoff Levand, George Spelvin, Greg Kurz, Gustavo A.
R. Silva, Gustavo Walbon, Haren Myneni, Hari Bathini, Joel Stanley,
Jordan Niethe, Kajol Jain, Kees Cook, Leonardo Bras, Madhavan
Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael Neuling, Michal
Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin,
Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram Pai,
Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler,
Wolfram Sang, Xiongfeng Wang.

* tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (299 commits)
powerpc/pseries: Make vio and ibmebus initcalls pseries specific
cxl: Remove dead Kconfig options
powerpc: Add POWER10 architected mode
powerpc/dt_cpu_ftrs: Add MMA feature
powerpc/dt_cpu_ftrs: Enable Prefixed Instructions
powerpc/dt_cpu_ftrs: Advertise support for ISA v3.1 if selected
powerpc: Add support for ISA v3.1
powerpc: Add new HWCAP bits
powerpc/64s: Don't set FSCR bits in INIT_THREAD
powerpc/64s: Save FSCR to init_task.thread.fscr after feature init
powerpc/64s: Don't let DT CPU features set FSCR_DSCR
powerpc/64s: Don't init FSCR_DSCR in __init_FSCR()
powerpc/32s: Fix another build failure with CONFIG_PPC_KUAP_DEBUG
powerpc/module_64: Use special stub for _mcount() with -mprofile-kernel
powerpc/module_64: Simplify check for -mprofile-kernel ftrace relocations
powerpc/module_64: Consolidate ftrace code
powerpc/32: Disable KASAN with pages bigger than 16k
powerpc/uaccess: Don't set KUEP by default on book3s/32
powerpc/uaccess: Don't set KUAP by default on book3s/32
powerpc/8xx: Reduce time spent in allow_user_access() and friends
...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2020-06-03T23:27:18+00:00

Pull networking updates from David Miller:

 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
    Augusto von Dentz.

 2) Add GSO partial support to igc, from Sasha Neftin.

 3) Several cleanups and improvements to r8169 from Heiner Kallweit.

 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
    device self-test. From Andrew Lunn.

 5) Start moving away from custom driver versions, use the globally
    defined kernel version instead, from Leon Romanovsky.

 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.

 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.

 8) Add sriov and vf support to hinic, from Luo bin.

 9) Support Media Redundancy Protocol (MRP) in the bridging code, from
    Horatiu Vultur.

10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.

11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
    Dubroca. Also add ipv6 support for espintcp.

12) Lots of ReST conversions of the networking documentation, from Mauro
    Carvalho Chehab.

13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
    from Doug Berger.

14) Allow to dump cgroup id and filter by it in inet_diag code, from
    Dmitry Yakunin.

15) Add infrastructure to export netlink attribute policies to
    userspace, from Johannes Berg.

16) Several optimizations to sch_fq scheduler, from Eric Dumazet.

17) Fallback to the default qdisc if qdisc init fails because otherwise
    a packet scheduler init failure will make a device inoperative. From
    Jesper Dangaard Brouer.

18) Several RISCV bpf jit optimizations, from Luke Nelson.

19) Correct the return type of the ->ndo_start_xmit() method in several
    drivers, it's netdev_tx_t but many drivers were using
    'int'. From Yunjian Wang.

20) Add an ethtool interface for PHY master/slave config, from Oleksij
    Rempel.

21) Add BPF iterators, from Yonghang Song.

22) Add cable test infrastructure, including ethool interfaces, from
    Andrew Lunn. Marvell PHY driver is the first to support this
    facility.

23) Remove zero-length arrays all over, from Gustavo A. R. Silva.

24) Calculate and maintain an explicit frame size in XDP, from Jesper
    Dangaard Brouer.

25) Add CAP_BPF, from Alexei Starovoitov.

26) Support terse dumps in the packet scheduler, from Vlad Buslov.

27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.

28) Add devm_register_netdev(), from Bartosz Golaszewski.

29) Minimize qdisc resets, from Cong Wang.

30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
    eliminate set_fs/get_fs calls. From Christoph Hellwig.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
  selftests: net: ip_defrag: ignore EPERM
  net_failover: fixed rollback in net_failover_open()
  Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
  Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
  vmxnet3: allow rx flow hash ops only when rss is enabled
  hinic: add set_channels ethtool_ops support
  selftests/bpf: Add a default $(CXX) value
  tools/bpf: Don't use $(COMPILE.c)
  bpf, selftests: Use bpf_probe_read_kernel
  s390/bpf: Use bcr 0,%0 as tail call nop filler
  s390/bpf: Maintain 8-byte stack alignment
  selftests/bpf: Fix verifier test
  selftests/bpf: Fix sample_cnt shared between two threads
  bpf, selftests: Adapt cls_redirect to call csum_level helper
  bpf: Add csum_level helper for fixing up csum levels
  bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
  sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
  crypto/chtls: IPv6 support for inline TLS
  Crypto/chcr: Fixes a coccinile check error
  Crypto/chcr: Fixes compilations warnings
  ...

via-pmu: don't bother with access_ok()

2020-05-29T15:05:54+00:00

we are using copy_to_user() for actual copying

Signed-off-by: Al Viro

macintosh/ams-input: switch to using input device polling mode

2020-05-28T13:24:32+00:00

Now that instances of input_dev support polling mode natively,
we no longer need to create input_polled_dev instance.

Signed-off-by: Dmitry Torokhov 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20191002214854.GA114387@dtor-ws

drivers/macintosh: Fix memleak in windfarm_pm112 driver

2020-05-15T01:58:56+00:00

create_cpu_loop() calls smu_sat_get_sdb_partition() which does
kmalloc() and returns the allocated buffer. In fact it's called twice,
and neither buffer is freed.

This results in a memory leak as reported by Erhard:
  unreferenced object 0xc00000047081f840 (size 32):
    comm "kwindfarm", pid 203, jiffies 4294880630 (age 5552.877s)
    hex dump (first 32 bytes):
      c8 06 02 7f ff 02 ff 01 fb bf 00 41 00 20 00 00  ...........A. ..
      00 07 89 37 00 a0 00 00 00 00 00 00 00 00 00 00  ...7............
    backtrace:
      [<0000000083f0a65c>] .smu_sat_get_sdb_partition+0xc4/0x2d0 [windfarm_smu_sat]
      [<000000003010fcb7>] .pm112_wf_notify+0x104c/0x13bc [windfarm_pm112]
      [<00000000b958b2dd>] .notifier_call_chain+0xa8/0x180
      [<0000000070490868>] .blocking_notifier_call_chain+0x64/0x90
      [<00000000131d8149>] .wf_thread_func+0x114/0x1a0
      [<000000000d54838d>] .kthread+0x13c/0x190
      [<00000000669b72bc>] .ret_from_kernel_thread+0x58/0x64
  unreferenced object 0xc0000004737089f0 (size 16):
    comm "kwindfarm", pid 203, jiffies 4294880879 (age 5552.050s)
    hex dump (first 16 bytes):
      c4 04 01 7f 22 11 e0 e6 ff 55 7b 12 ec 11 00 00  ...."....U{.....
    backtrace:
      [<0000000083f0a65c>] .smu_sat_get_sdb_partition+0xc4/0x2d0 [windfarm_smu_sat]
      [<00000000b94ef7e1>] .pm112_wf_notify+0x1294/0x13bc [windfarm_pm112]
      [<00000000b958b2dd>] .notifier_call_chain+0xa8/0x180
      [<0000000070490868>] .blocking_notifier_call_chain+0x64/0x90
      [<00000000131d8149>] .wf_thread_func+0x114/0x1a0
      [<000000000d54838d>] .kthread+0x13c/0x190
      [<00000000669b72bc>] .ret_from_kernel_thread+0x58/0x64

Fix it by rearranging the logic so we deal with each buffer
separately, which then makes it easy to free the buffer once we're
done with it.

Fixes: ac171c46667c ("[PATCH] powerpc: Thermal control for dual core G5s")
Cc: stable@vger.kernel.org # v2.6.16+
Reported-by: Erhard F. 
Signed-off-by: Michael Ellerman 
Tested-by: Erhard F. 
Link: https://lore.kernel.org/r/20200423060038.3308530-1-mpe@ellerman.id.au

sysctl: pass kernel pointers to ->proc_handler

2020-04-27T06:07:40+00:00

Instead of having all the sysctl handlers deal with user pointers, which
is rather hairy in terms of the BPF interaction, copy the input to and
from  userspace in common code.  This also means that the strings are
always NUL-terminated by the common code, making the API a little bit
safer.

As most handler just pass through the data to one of the common handlers
a lot of the changes are mechnical.

Signed-off-by: Christoph Hellwig 
Acked-by: Andrey Ignatov 
Signed-off-by: Al Viro

Merge tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2020-04-03T20:22:40+00:00

Pull char/misc driver updates from Greg KH:
 "Here is the big set of char/misc/other driver patches for 5.7-rc1.

  Lots of things in here, and it's later than expected due to some
  reverts to resolve some reported issues. All is now clean with no
  reported problems in linux-next.

  Included in here is:
   - interconnect updates
   - mei driver updates
   - uio updates
   - nvmem driver updates
   - soundwire updates
   - binderfs updates
   - coresight updates
   - habanalabs updates
   - mhi new bus type and core
   - extcon driver updates
   - some Kconfig cleanups
   - other small misc driver cleanups and updates

  As mentioned, all have been in linux-next for a while, and with the
  last two reverts, all is calm and good"

* tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits)
  Revert "driver core: platform: Initialize dma_parms for platform devices"
  Revert "amba: Initialize dma_parms for amba devices"
  amba: Initialize dma_parms for amba devices
  driver core: platform: Initialize dma_parms for platform devices
  bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device()
  bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture
  bus: mhi: core: Add support for reading MHI info from device
  misc: rtsx: set correct pcr_ops for rts522A
  speakup: misc: Use dynamic minor numbers for speakup devices
  mei: me: add cedar fork device ids
  coresight: do not use the BIT() macro in the UAPI header
  Documentation: provide IBM contacts for embargoed hardware
  nvmem: core: remove nvmem_sysfs_get_groups()
  nvmem: core: use is_bin_visible for permissions
  nvmem: core: use device_register and device_unregister
  nvmem: core: add root_only member to nvmem device struct
  extcon: axp288: Add wakeup support
  extcon: Mark extcon_get_edev_name() function as exported symbol
  extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER
  dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format
  ...