[ Upstream commit fd748e177194ebcbbaf98df75152a30e08230cc6 ]

The of_device_unregister call in therm_windtunnel's module_exit procedure
does not fully reverse the effects of of_platform_device_create in the
module_init prodedure.  Once you unload this module, it is impossible
to load it ever again since only the first of_platform_device_create
call on the fan node succeeds.

This driver predates first git commit, and it turns out back then
of_platform_device_create worked differently than it does today.
So this is actually an old regression.

The appropriate function to undo of_platform_device_create now appears
to be of_platform_device_destroy, and switching to use this makes it
possible to unload and load the module as expected.

Signed-off-by: Nick Bowler <nbowler@draconx.ca>
Fixes: c6e126de43e7 ("of: Keep track of populated platform devices")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240711035428.16696-1-nbowler@draconx.ca
Signed-off-by: Sasha Levin <sashal@kernel.org>

Pull powerpc updates from Michael Ellerman:

 - Enable BPF Kernel Functions (kfuncs) in the powerpc BPF JIT.

 - Allow per-process DEXCR (Dynamic Execution Control Register) settings
   via prctl, notably NPHIE which controls hashst/hashchk for ROP
   protection.

 - Install powerpc selftests in sub-directories. Note this changes the
   way run_kselftest.sh needs to be invoked for powerpc selftests.

 - Change fadump (Firmware Assisted Dump) to better handle memory
   add/remove.

 - Add support for passing additional parameters to the fadump kernel.

 - Add support for updating the kdump image on CPU/memory add/remove
   events.

 - Other small features, cleanups and fixes.

Thanks to Andrew Donnellan, Andy Shevchenko, Aneesh Kumar K.V, Arnd
Bergmann, Benjamin Gray, Bjorn Helgaas, Christian Zigotzky, Christophe
Jaillet, Christophe Leroy, Colin Ian King, Cédric Le Goater, Dr. David
Alan Gilbert, Erhard Furtner, Frank Li, GUO Zihua, Ganesh Goudar, Geoff
Levand, Ghanshyam Agrawal, Greg Kurz, Hari Bathini, Joel Stanley, Justin
Stitt, Kunwu Chan, Li Yang, Lidong Zhong, Madhavan Srinivasan, Mahesh
Salgaonkar, Masahiro Yamada, Matthias Schiffer, Naresh Kamboju, Nathan
Chancellor, Nathan Lynch, Naveen N Rao, Nicholas Miehlbradt, Ran Wang,
Randy Dunlap, Ritesh Harjani, Sachin Sant, Shirisha Ganta, Shrikanth
Hegde, Sourabh Jain, Stephen Rothwell, sundar, Thorsten Blum, Vaibhav
Jain, Xiaowei Bao, Yang Li, and Zhao Chenhui.

* tag 'powerpc-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (85 commits)
  powerpc/fadump: Fix section mismatch warning
  powerpc/85xx: fix compile error without CONFIG_CRASH_DUMP
  powerpc/fadump: update documentation about bootargs_append
  powerpc/fadump: pass additional parameters when fadump is active
  powerpc/fadump: setup additional parameters for dump capture kernel
  powerpc/pseries/fadump: add support for multiple boot memory regions
  selftests/powerpc/dexcr: Fix spelling mistake "predicition" -> "prediction"
  KVM: PPC: Book3S HV nestedv2: Fix an error handling path in gs_msg_ops_kvmhv_nestedv2_config_fill_info()
  KVM: PPC: Fix documentation for ppc mmu caps
  KVM: PPC: code cleanup for kvmppc_book3s_irqprio_deliver
  KVM: PPC: Book3S HV nestedv2: Cancel pending DEC exception
  powerpc/xmon: Check cpu id in commands "c#", "dp#" and "dx#"
  powerpc/code-patching: Use dedicated memory routines for patching
  powerpc/code-patching: Test patch_instructions() during boot
  powerpc64/kasan: Pass virtual addresses to kasan_init_phys_region()
  powerpc: rename SPRN_HID2 define to SPRN_HID2_750FX
  powerpc: Fix typos
  powerpc/eeh: Fix spelling of the word "auxillary" and update comment
  macintosh/ams: Fix unused variable warning
  powerpc/Makefile: Remove bits related to the previous use of -mcmodel=large
  ...

If both CONFIG_SENSORS_AMS_PMU and CONFIG_SENSORS_AMS_I2C are unset,
there is an unused variable warning in the ams driver:

  drivers/macintosh/ams/ams-core.c: In function 'ams_init':
  drivers/macintosh/ams/ams-core.c:181:29: warning: unused variable 'np'
    181 |         struct device_node *np;

The driver needs at least one of the configs enabled in order to
actually function. So fix the compiler warning by ensuring at least one
of the configs is enabled.

Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240507140150.54630-1-mpe@ellerman.id.au

use the new cleanup magic to replace of_node_put() with
__free(device_node) marking to auto release when they get out of scope.

Suggested-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: sundar <prosunofficial@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240424150718.5006-1-prosunofficial@gmail.com

The via-macii ADB driver calls request_irq() after disabling hard
interrupts. But disabling interrupts isn't necessary here because the
VIA shift register interrupt was masked during VIA1 initialization.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/419fcc09d0e563b425c419053d02236b044d86b0.1710298421.git.fthain@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

Pull powerpc updates from Michael Ellerman:

 - Add AT_HWCAP3 and AT_HWCAP4 aux vector entries for future use
   by glibc

 - Add support for recognising the Power11 architected and raw PVRs

 - Add support for nr_cpus=n on the command line where the
   boot CPU is >= n

 - Add ppcxx_allmodconfig targets for all 32-bit sub-arches

 - Other small features, cleanups and fixes

Thanks to Akanksha J N, Brian King, Christophe Leroy, Dawei Li, Geoff
Levand, Greg Kroah-Hartman, Jan-Benedict Glaw, Kajol Jain, Kunwu Chan,
Li zeming, Madhavan Srinivasan, Masahiro Yamada, Nathan Chancellor,
Nicholas Piggin, Peter Bergner, Qiheng Lin, Randy Dunlap, Ricardo B.
Marliere, Rob Herring, Sathvika Vasireddy, Shrikanth Hegde, Uwe
Kleine-König, Vaibhav Jain, and Wen Xiong.

* tag 'powerpc-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (71 commits)
  powerpc/macio: Make remove callback of macio driver void returned
  powerpc/83xx: Fix build failure with FPU=n
  powerpc/64s: Fix get_hugepd_cache_index() build failure
  powerpc/4xx: Fix warp_gpio_leds build failure
  powerpc/amigaone: Make several functions static
  powerpc/embedded6xx: Fix no previous prototype for avr_uart_send() etc.
  macintosh/adb: make adb_dev_class constant
  powerpc: xor_vmx: Add '-mhard-float' to CFLAGS
  powerpc/fsl: Fix mfpmr() asm constraint error
  powerpc: Remove cpu-as-y completely
  powerpc/fsl: Modernise mt/mfpmr
  powerpc/fsl: Fix mfpmr build errors with newer binutils
  powerpc/64s: Use .machine power4 around dcbt
  powerpc/64s: Move dcbt/dcbtst sequence into a macro
  powerpc/mm: Code cleanup for __hash_page_thp
  powerpc/hv-gpci: Fix the H_GET_PERF_COUNTER_INFO hcall return value checks
  powerpc/irq: Allow softirq to hardirq stack transition
  powerpc: Stop using of_root
  powerpc/machdep: Define 'compatibles' property in ppc_md and use it
  of: Reimplement of_machine_is_compatible() using of_machine_compatible_match()
  ...

Fix builds with CONFIG_PMAC_BACKLIGHT=y. The include statement for the
backlight header has recently been removed from <linux/fb.h>. Add it to
via-pmu-backlight.c to get the necessary symbols.

Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Closes: https://lore.kernel.org/dri-devel/CA+G9fYsAk5TbqqxFC2W4oHLGA0CbTHMxbeq8QayFXTU75YiueA@mail.gmail.com/
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 11b4eedfc87d ("fbdev: Do not include <linux/backlight.h> in header")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20240306122935.10626-3-tzimmermann@suse.de

Commit fc7a6209d571 ("bus: Make remove callback return void") forces
bus_type::remove be void-returned, it doesn't make much sense for any
bus based driver implementing remove callbalk to return non-void to
its caller.

This change is for macio bus based drivers.

Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/TYCP286MB232391520CB471E7C8D6EA84CAD19@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM

Since commit 43a7206b0963 ("driver core: class: make class_register()
take a const *"), the driver core allows for struct class to be in
read-only memory, so move the adb_dev_class structure to be declared
at build time placing it into read-only memory, instead of having to
be dynamically allocated at boot time.

Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240305-macintosh-v1-1-9c3f4f882045@marliere.net

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/42358a12b38c9498b8ab2896d4f3d4eb9484b45e.1704900449.git.u.kleine-koenig@pengutronix.de