Pull LED updates from Jacek Anaszewski:
 "This time we're removing more than adding:

  Removed drivers:

    leds-versatile:
      - all users of the Versatile LED driver are deleted and replaced
        with the very generic leds-syscon

    leds-sead3:
      - SEAD3 is using the generic leds-syscon & regmap based
        register-bit-led driver

  LED class drivers improvements:

    ledtrig-gpio:
      - use threaded IRQ, which both simplifies the code because we can
        drop the workqueue indirection, and it enables using the trigger
        for GPIOs that work with threaded IRQs themselves
      - refresh LED state after GPIO change since the new GPIO may have
        a different state than the old one

    leds-lp55xx:
      - make various arrays static const

    leds-pca963x:
      - add bindings to invert polarity"

* tag 'leds_for_4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  leds: lp55xx: make various arrays static const
  leds: Remove SEAD-3 driver
  leds: trigger: gpio: Use threaded IRQ
  leds: trigger: gpio: Refresh LED state after GPIO change
  leds: Delete obsolete Versatile driver
  leds: pca963x: Add bindings to invert polarity

Several arrays are currently on-stack and instead should be made
static const.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>

Linux 4.12-rc6

* tag 'v4.12-rc6': (813 commits)
  Linux 4.12-rc6
  mm: larger stack guard gap, between vmas
  virtio_balloon: disable VIOMMU support
  mm: correct the comment when reclaimed pages exceed the scanned pages
  userfaultfd: shmem: handle coredumping in handle_userfault()
  mm: numa: avoid waiting on freed migrated pages
  swap: cond_resched in swap_cgroup_prepare()
  mm/memory-failure.c: use compound_head() flags for huge pages
  perf unwind: Report module before querying isactivation in dwfl unwind
  fs: pass on flags in compat_writev
  objtool: Add fortify_panic as __noreturn function
  powerpc/debug: Add missing warn flag to WARN_ON's non-builtin path
  USB: gadgetfs, dummy-hcd, net2280: fix locking for callbacks
  drm: mxsfb_crtc: Reset the eLCDIF controller
  drm/mgag200: Fix to always set HiPri for G200e4 V2
  i2c: ismt: fix wrong device address when unmap the data buffer
  i2c: rcar: use correct length when unmapping DMA
  powerpc/xive: Fix offset for store EOI MMIOs
  drm/tegra: Correct idr_alloc() minimum id
  drm/tegra: Fix lockup on a use of staging API
  ...

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

SEAD3 is using the generic syscon & regmap based register-bit-led
driver as of commit c764583f40b8 ("MIPS: SEAD3: Use register-bit-led
driver via DT for LEDs") merged in the v4.9 cycle. As such the custom
SEAD-3 LED driver is now unused, so remove it.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: linux-leds@vger.kernel.org
Cc: linux-mips@linux-mips.org
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>

Pull LED fixes from Jacek Anaszewski:
 "Two LED fixes:

   - fix signal source assignment for leds-bcm6328

   - revert patch that intended to fix LED behavior on suspend but it
     had a side effect preventing suspend at all due to uevent being
     sent on trigger removal"

* tag 'led_fixes_for_4.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  Revert "leds: handle suspend/resume in heartbeat trigger"
  leds: bcm6328: fix signal source assignment for leds 4 to 7

This reverts commit 5ab92a7cb82c66bf30685583a38a18538e3807db.

System cannot enter suspend mode because of heartbeat led trigger.
In autosleep_wq, try_to_suspend function will try to enter suspend
mode in specific period. it will get wakeup_count then call pm_notifier
chain callback function and freeze processes.
Heartbeat_pm_notifier is called and it call led_trigger_unregister to
change the trigger of led device to none. It will send uevent message
and the wakeup source count changed. As wakeup_count changed, suspend
will abort.

Fixes: 5ab92a7cb82c ("leds: handle suspend/resume in heartbeat trigger")
Signed-off-by: Zhang Bo <bo.zhang@nxp.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>

Each nibble represents 4 LEDs, and in case of the higher register, bit 0
represents LED 4, so we need to use modulus for the LED number as well.

Fixes: fd7b025a238d0a5440bfa26c585eb78097bf48dc ("leds: add BCM6328 LED driver")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>

media fixes for v4.12-rc4

* tag 'media/v4.12-2': (598 commits)
  [media] rc-core: race condition during ir_raw_event_register()
  [media] cec: drop MEDIA_CEC_DEBUG
  [media] cec: rename MEDIA_CEC_NOTIFIER to CEC_NOTIFIER
  [media] cec: select CEC_CORE instead of depend on it
  [media] rainshadow-cec: ensure exit_loop is intialized
  [media] atomisp: don't treat warnings as errors
  Linux 4.12-rc3
  x86/ftrace: Make sure that ftrace trampolines are not RWX
  x86/mm/ftrace: Do not bug in early boot on irqs_disabled in cpu_flush_range()
  selftests/ftrace: Add a testcase for many kprobe events
  kprobes/x86: Fix to set RWX bits correctly before releasing trampoline
  ftrace: Fix memory leak in ftrace_graph_release()
  ipv4: add reference counting to metrics
  net: ethernet: ax88796: don't call free_irq without request_irq first
  ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets
  sctp: fix ICMP processing if skb is non-linear
  net: llc: add lock_sock in llc_ui_bind to avoid a race condition
  PCI/msi: fix the pci_alloc_irq_vectors_affinity stub
  blk-mq: Only register debugfs attributes for blk-mq queues
  x86/timers: Move simple_udelay_calibration past init_hypervisor_platform
  ...

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Pass the more generic fwnode_handle to the init function than the
device_node.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

This both simplifies the code because we can drop the workqueue
indirection, and it enables using the trigger for GPIOs that work with
threaded IRQs themselves.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>