linux-stable.git/drivers/isdn, branch linux-5.14.y

mISDN: Fix return values of the probe function

2021-11-17T10:03:28+00:00

[ Upstream commit e211210098cb7490db2183d725f5c0f10463a704 ]

During the process of driver probing, the probe function should return < 0
for failure, otherwise, the kernel will treat value > 0 as success.

Signed-off-by: Zheyu Ma 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

isdn: mISDN: Fix sleeping function called from invalid context

2021-10-27T07:59:51+00:00

[ Upstream commit 6510e80a0b81b5d814e3aea6297ba42f5e76f73c ]

The driver can call card->isac.release() function from an atomic
context.

Fix this by calling this function after releasing the lock.

The following log reveals it:

[   44.168226 ] BUG: sleeping function called from invalid context at kernel/workqueue.c:3018
[   44.168941 ] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 5475, name: modprobe
[   44.169574 ] INFO: lockdep is turned off.
[   44.169899 ] irq event stamp: 0
[   44.170160 ] hardirqs last  enabled at (0): [<0000000000000000>] 0x0
[   44.170627 ] hardirqs last disabled at (0): [] copy_process+0x132d/0x3e00
[   44.171240 ] softirqs last  enabled at (0): [] copy_process+0x135a/0x3e00
[   44.171852 ] softirqs last disabled at (0): [<0000000000000000>] 0x0
[   44.172318 ] Preemption disabled at:
[   44.172320 ] [] nj_release+0x69/0x500 [netjet]
[   44.174441 ] Call Trace:
[   44.174630 ]  dump_stack_lvl+0xa8/0xd1
[   44.174912 ]  dump_stack+0x15/0x17
[   44.175166 ]  ___might_sleep+0x3a2/0x510
[   44.175459 ]  ? nj_release+0x69/0x500 [netjet]
[   44.175791 ]  __might_sleep+0x82/0xe0
[   44.176063 ]  ? start_flush_work+0x20/0x7b0
[   44.176375 ]  start_flush_work+0x33/0x7b0
[   44.176672 ]  ? trace_irq_enable_rcuidle+0x85/0x170
[   44.177034 ]  ? kasan_quarantine_put+0xaa/0x1f0
[   44.177372 ]  ? kasan_quarantine_put+0xaa/0x1f0
[   44.177711 ]  __flush_work+0x11a/0x1a0
[   44.177991 ]  ? flush_work+0x20/0x20
[   44.178257 ]  ? lock_release+0x13c/0x8f0
[   44.178550 ]  ? __kasan_check_write+0x14/0x20
[   44.178872 ]  ? do_raw_spin_lock+0x148/0x360
[   44.179187 ]  ? read_lock_is_recursive+0x20/0x20
[   44.179530 ]  ? __kasan_check_read+0x11/0x20
[   44.179846 ]  ? do_raw_spin_unlock+0x55/0x900
[   44.180168 ]  ? ____kasan_slab_free+0x116/0x140
[   44.180505 ]  ? _raw_spin_unlock_irqrestore+0x41/0x60
[   44.180878 ]  ? skb_queue_purge+0x1a3/0x1c0
[   44.181189 ]  ? kfree+0x13e/0x290
[   44.181438 ]  flush_work+0x17/0x20
[   44.181695 ]  mISDN_freedchannel+0xe8/0x100
[   44.182006 ]  isac_release+0x210/0x260 [mISDNipac]
[   44.182366 ]  nj_release+0xf6/0x500 [netjet]
[   44.182685 ]  nj_remove+0x48/0x70 [netjet]
[   44.182989 ]  pci_device_remove+0xa9/0x250

Signed-off-by: Zheyu Ma 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

isdn: cpai: check ctr->cnr to avoid array index out of bound

2021-10-27T07:59:48+00:00

commit 1f3e2e97c003f80c4b087092b225c8787ff91e4d upstream.

The cmtp_add_connection() would add a cmtp session to a controller
and run a kernel thread to process cmtp.

	__module_get(THIS_MODULE);
	session->task = kthread_run(cmtp_session, session, "kcmtpd_ctr_%d",
								session->num);

During this process, the kernel thread would call detach_capi_ctr()
to detach a register controller. if the controller
was not attached yet, detach_capi_ctr() would
trigger an array-index-out-bounds bug.

[   46.866069][ T6479] UBSAN: array-index-out-of-bounds in
drivers/isdn/capi/kcapi.c:483:21
[   46.867196][ T6479] index -1 is out of range for type 'capi_ctr *[32]'
[   46.867982][ T6479] CPU: 1 PID: 6479 Comm: kcmtpd_ctr_0 Not tainted
5.15.0-rc2+ #8
[   46.869002][ T6479] Hardware name: QEMU Standard PC (i440FX + PIIX,
1996), BIOS 1.14.0-2 04/01/2014
[   46.870107][ T6479] Call Trace:
[   46.870473][ T6479]  dump_stack_lvl+0x57/0x7d
[   46.870974][ T6479]  ubsan_epilogue+0x5/0x40
[   46.871458][ T6479]  __ubsan_handle_out_of_bounds.cold+0x43/0x48
[   46.872135][ T6479]  detach_capi_ctr+0x64/0xc0
[   46.872639][ T6479]  cmtp_session+0x5c8/0x5d0
[   46.873131][ T6479]  ? __init_waitqueue_head+0x60/0x60
[   46.873712][ T6479]  ? cmtp_add_msgpart+0x120/0x120
[   46.874256][ T6479]  kthread+0x147/0x170
[   46.874709][ T6479]  ? set_kthread_struct+0x40/0x40
[   46.875248][ T6479]  ret_from_fork+0x1f/0x30
[   46.875773][ T6479]

Signed-off-by: Xiaolong Huang 
Acked-by: Arnd Bergmann 
Link: https://lore.kernel.org/r/20211008065830.305057-1-butterflyhuangxx@gmail.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'tty-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2021-07-05T21:08:24+00:00

Pull tty / serial updates from Greg KH:
 "Here is the big set of tty and serial driver patches for 5.14-rc1.

  A bit more than normal, but nothing major, lots of cleanups.
  Highlights are:

   - lots of tty api cleanups and mxser driver cleanups from Jiri

   - build warning fixes

   - various serial driver updates

   - coding style cleanups

   - various tty driver minor fixes and updates

   - removal of broken and disable r3964 line discipline (finally!)

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (227 commits)
  serial: mvebu-uart: remove unused member nb from struct mvebu_uart
  arm64: dts: marvell: armada-37xx: Fix reg for standard variant of UART
  dt-bindings: mvebu-uart: fix documentation
  serial: mvebu-uart: correctly calculate minimal possible baudrate
  serial: mvebu-uart: do not allow changing baudrate when uartclk is not available
  serial: mvebu-uart: fix calculation of clock divisor
  tty: make linux/tty_flip.h self-contained
  serial: Prefer unsigned int to bare use of unsigned
  serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs
  serial: qcom_geni_serial: use DT aliases according to DT bindings
  Revert "tty: serial: Add UART driver for Cortina-Access platform"
  tty: serial: Add UART driver for Cortina-Access platform
  MAINTAINERS: add me back as mxser maintainer
  mxser: Documentation, fix typos
  mxser: Documentation, make the docs up-to-date
  mxser: Documentation, remove traces of callout device
  mxser: introduce mxser_16550A_or_MUST helper
  mxser: rename flags to old_speed in mxser_set_serial_info
  mxser: use port variable in mxser_set_serial_info
  mxser: access info->MCR under info->slock
  ...

Merge 5.13-rc4 into tty-next

2021-05-31T07:44:28+00:00

We need the tty/serial fixes in here as well.

Signed-off-by: Greg Kroah-Hartman

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2021-05-27T16:55:10+00:00

cdc-wdm: s/kill_urbs/poison_urbs/ to fix build

Signed-off-by: Jakub Kicinski

Merge tag 'net-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2021-05-27T03:44:49+00:00

Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.13-rc4, including fixes from bpf, netfilter,
  can and wireless trees. Notably including fixes for the recently
  announced "FragAttacks" WiFi vulnerabilities. Rather large batch,
  touching some core parts of the stack, too, but nothing hair-raising.

  Current release - regressions:

   - tipc: make node link identity publish thread safe

   - dsa: felix: re-enable TAS guard band mode

   - stmmac: correct clocks enabled in stmmac_vlan_rx_kill_vid()

   - stmmac: fix system hang if change mac address after interface
     ifdown

  Current release - new code bugs:

   - mptcp: avoid OOB access in setsockopt()

   - bpf: Fix nested bpf_bprintf_prepare with more per-cpu buffers

   - ethtool: stats: fix a copy-paste error - init correct array size

  Previous releases - regressions:

   - sched: fix packet stuck problem for lockless qdisc

   - net: really orphan skbs tied to closing sk

   - mlx4: fix EEPROM dump support

   - bpf: fix alu32 const subreg bound tracking on bitwise operations

   - bpf: fix mask direction swap upon off reg sign change

   - bpf, offload: reorder offload callback 'prepare' in verifier

   - stmmac: Fix MAC WoL not working if PHY does not support WoL

   - packetmmap: fix only tx timestamp on request

   - tipc: skb_linearize the head skb when reassembling msgs

  Previous releases - always broken:

   - mac80211: address recent "FragAttacks" vulnerabilities

   - mac80211: do not accept/forward invalid EAPOL frames

   - mptcp: avoid potential error message floods

   - bpf, ringbuf: deny reserve of buffers larger than ringbuf to
     prevent out of buffer writes

   - bpf: forbid trampoline attach for functions with variable arguments

   - bpf: add deny list of functions to prevent inf recursion of tracing
     programs

   - tls splice: check SPLICE_F_NONBLOCK instead of MSG_DONTWAIT

   - can: isotp: prevent race between isotp_bind() and
     isotp_setsockopt()

   - netfilter: nft_set_pipapo_avx2: Add irq_fpu_usable() check,
     fallback to non-AVX2 version

  Misc:

   - bpf: add kconfig knob for disabling unpriv bpf by default"

* tag 'net-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (172 commits)
  net: phy: Document phydev::dev_flags bits allocation
  mptcp: validate 'id' when stopping the ADD_ADDR retransmit timer
  mptcp: avoid error message on infinite mapping
  mptcp: drop unconditional pr_warn on bad opt
  mptcp: avoid OOB access in setsockopt()
  nfp: update maintainer and mailing list addresses
  net: mvpp2: add buffer header handling in RX
  bnx2x: Fix missing error code in bnx2x_iov_init_one()
  net: zero-initialize tc skb extension on allocation
  net: hns: Fix kernel-doc
  sctp: fix the proc_handler for sysctl encap_port
  sctp: add the missing setting for asoc encap_port
  bpf, selftests: Adjust few selftest result_unpriv outcomes
  bpf: No need to simulate speculative domain for immediates
  bpf: Fix mask direction swap upon off reg sign change
  bpf: Wrap aux data inside bpf_sanitize_info container
  bpf: Fix BPF_LSM kconfig symbol dependency
  selftests/bpf: Add test for l3 use of bpf_redirect_peer
  bpftool: Add sock_release help info for cgroup attach/prog load command
  net: dsa: microchip: enable phy errata workaround on 9567
  ...

mISDN: Remove obsolete PIPELINE_DEBUG debugging information

2021-05-20T20:03:05+00:00

As Leon Romanovsky's tips:
The definition of macro PIPELINE_DEBUG is commented more than 10 years ago
and can be seen as a dead code that should be removed.

Suggested-by: Leon Romanovsky 
Signed-off-by: Zhen Lei 
Reviewed-by: Leon Romanovsky 
Signed-off-by: David S. Miller

isdn: mISDN: netjet: Fix crash in nj_probe:

2021-05-17T21:03:21+00:00

'nj_setup' in netjet.c might fail with -EIO and in this case
'card->irq' is initialized and is bigger than zero. A subsequent call to
'nj_release' will free the irq that has not been requested.

Fix this bug by deleting the previous assignment to 'card->irq' and just
keep the assignment before 'request_irq'.

The KASAN's log reveals it:

[    3.354615 ] WARNING: CPU: 0 PID: 1 at kernel/irq/manage.c:1826
free_irq+0x100/0x480
[    3.355112 ] Modules linked in:
[    3.355310 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
5.13.0-rc1-00144-g25a1298726e #13
[    3.355816 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[    3.356552 ] RIP: 0010:free_irq+0x100/0x480
[    3.356820 ] Code: 6e 08 74 6f 4d 89 f4 e8 5e ac 09 00 4d 8b 74 24 18
4d 85 f6 75 e3 e8 4f ac 09 00 8b 75 c8 48 c7 c7 78 c1 2e 85 e8 e0 cf f5
ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 72 33 0b 03 48 8b 43 40 4c 8b a0 80
[    3.358012 ] RSP: 0000:ffffc90000017b48 EFLAGS: 00010082
[    3.358357 ] RAX: 0000000000000000 RBX: ffff888104dc8000 RCX:
0000000000000000
[    3.358814 ] RDX: ffff8881003c8000 RSI: ffffffff8124a9e6 RDI:
00000000ffffffff
[    3.359272 ] RBP: ffffc90000017b88 R08: 0000000000000000 R09:
0000000000000000
[    3.359732 ] R10: ffffc900000179f0 R11: 0000000000001d04 R12:
0000000000000000
[    3.360195 ] R13: ffff888107dc6000 R14: ffff888107dc6928 R15:
ffff888104dc80a8
[    3.360652 ] FS:  0000000000000000(0000) GS:ffff88817bc00000(0000)
knlGS:0000000000000000
[    3.361170 ] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    3.361538 ] CR2: 0000000000000000 CR3: 000000000582e000 CR4:
00000000000006f0
[    3.362003 ] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[    3.362175 ] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
[    3.362175 ] Call Trace:
[    3.362175 ]  nj_release+0x51/0x1e0
[    3.362175 ]  nj_probe+0x450/0x950
[    3.362175 ]  ? pci_device_remove+0x110/0x110
[    3.362175 ]  local_pci_probe+0x45/0xa0
[    3.362175 ]  pci_device_probe+0x12b/0x1d0
[    3.362175 ]  really_probe+0x2a9/0x610
[    3.362175 ]  driver_probe_device+0x90/0x1d0
[    3.362175 ]  ? mutex_lock_nested+0x1b/0x20
[    3.362175 ]  device_driver_attach+0x68/0x70
[    3.362175 ]  __driver_attach+0x124/0x1b0
[    3.362175 ]  ? device_driver_attach+0x70/0x70
[    3.362175 ]  bus_for_each_dev+0xbb/0x110
[    3.362175 ]  ? rdinit_setup+0x45/0x45
[    3.362175 ]  driver_attach+0x27/0x30
[    3.362175 ]  bus_add_driver+0x1eb/0x2a0
[    3.362175 ]  driver_register+0xa9/0x180
[    3.362175 ]  __pci_register_driver+0x82/0x90
[    3.362175 ]  ? w6692_init+0x38/0x38
[    3.362175 ]  nj_init+0x36/0x38
[    3.362175 ]  do_one_initcall+0x7f/0x3d0
[    3.362175 ]  ? rdinit_setup+0x45/0x45
[    3.362175 ]  ? rcu_read_lock_sched_held+0x4f/0x80
[    3.362175 ]  kernel_init_freeable+0x2aa/0x301
[    3.362175 ]  ? rest_init+0x2c0/0x2c0
[    3.362175 ]  kernel_init+0x18/0x190
[    3.362175 ]  ? rest_init+0x2c0/0x2c0
[    3.362175 ]  ? rest_init+0x2c0/0x2c0
[    3.362175 ]  ret_from_fork+0x1f/0x30
[    3.362175 ] Kernel panic - not syncing: panic_on_warn set ...
[    3.362175 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
5.13.0-rc1-00144-g25a1298726e #13
[    3.362175 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[    3.362175 ] Call Trace:
[    3.362175 ]  dump_stack+0xba/0xf5
[    3.362175 ]  ? free_irq+0x100/0x480
[    3.362175 ]  panic+0x15a/0x3f2
[    3.362175 ]  ? __warn+0xf2/0x150
[    3.362175 ]  ? free_irq+0x100/0x480
[    3.362175 ]  __warn+0x108/0x150
[    3.362175 ]  ? free_irq+0x100/0x480
[    3.362175 ]  report_bug+0x119/0x1c0
[    3.362175 ]  handle_bug+0x3b/0x80
[    3.362175 ]  exc_invalid_op+0x18/0x70
[    3.362175 ]  asm_exc_invalid_op+0x12/0x20
[    3.362175 ] RIP: 0010:free_irq+0x100/0x480
[    3.362175 ] Code: 6e 08 74 6f 4d 89 f4 e8 5e ac 09 00 4d 8b 74 24 18
4d 85 f6 75 e3 e8 4f ac 09 00 8b 75 c8 48 c7 c7 78 c1 2e 85 e8 e0 cf f5
ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 72 33 0b 03 48 8b 43 40 4c 8b a0 80
[    3.362175 ] RSP: 0000:ffffc90000017b48 EFLAGS: 00010082
[    3.362175 ] RAX: 0000000000000000 RBX: ffff888104dc8000 RCX:
0000000000000000
[    3.362175 ] RDX: ffff8881003c8000 RSI: ffffffff8124a9e6 RDI:
00000000ffffffff
[    3.362175 ] RBP: ffffc90000017b88 R08: 0000000000000000 R09:
0000000000000000
[    3.362175 ] R10: ffffc900000179f0 R11: 0000000000001d04 R12:
0000000000000000
[    3.362175 ] R13: ffff888107dc6000 R14: ffff888107dc6928 R15:
ffff888104dc80a8
[    3.362175 ]  ? vprintk+0x76/0x150
[    3.362175 ]  ? free_irq+0x100/0x480
[    3.362175 ]  nj_release+0x51/0x1e0
[    3.362175 ]  nj_probe+0x450/0x950
[    3.362175 ]  ? pci_device_remove+0x110/0x110
[    3.362175 ]  local_pci_probe+0x45/0xa0
[    3.362175 ]  pci_device_probe+0x12b/0x1d0
[    3.362175 ]  really_probe+0x2a9/0x610
[    3.362175 ]  driver_probe_device+0x90/0x1d0
[    3.362175 ]  ? mutex_lock_nested+0x1b/0x20
[    3.362175 ]  device_driver_attach+0x68/0x70
[    3.362175 ]  __driver_attach+0x124/0x1b0
[    3.362175 ]  ? device_driver_attach+0x70/0x70
[    3.362175 ]  bus_for_each_dev+0xbb/0x110
[    3.362175 ]  ? rdinit_setup+0x45/0x45
[    3.362175 ]  driver_attach+0x27/0x30
[    3.362175 ]  bus_add_driver+0x1eb/0x2a0
[    3.362175 ]  driver_register+0xa9/0x180
[    3.362175 ]  __pci_register_driver+0x82/0x90
[    3.362175 ]  ? w6692_init+0x38/0x38
[    3.362175 ]  nj_init+0x36/0x38
[    3.362175 ]  do_one_initcall+0x7f/0x3d0
[    3.362175 ]  ? rdinit_setup+0x45/0x45
[    3.362175 ]  ? rcu_read_lock_sched_held+0x4f/0x80
[    3.362175 ]  kernel_init_freeable+0x2aa/0x301
[    3.362175 ]  ? rest_init+0x2c0/0x2c0
[    3.362175 ]  kernel_init+0x18/0x190
[    3.362175 ]  ? rest_init+0x2c0/0x2c0
[    3.362175 ]  ? rest_init+0x2c0/0x2c0
[    3.362175 ]  ret_from_fork+0x1f/0x30
[    3.362175 ] Dumping ftrace buffer:
[    3.362175 ]    (ftrace buffer empty)
[    3.362175 ] Kernel Offset: disabled
[    3.362175 ] Rebooting in 1 seconds..

Reported-by: Zheyu Ma 
Signed-off-by: Zheyu Ma 
Signed-off-by: David S. Miller

isdn: mISDN: correctly handle ph_info allocation failure in hfcsusb_ph_info

2021-05-13T16:32:23+00:00

Modify return type of hfcusb_ph_info to int, so that we can pass error
value up the call stack when allocation of ph_info fails. Also change
three of four call sites to actually account for the memory failure.
The fourth, in ph_state_nt, is infeasible to change as it is in turn
called by ph_state which is used as a function pointer argument to
mISDN_initdchannel, which would necessitate changing its signature
and updating all the places where it is used (too many).

Fixes original flawed commit (38d22659803a) from the University of
Minnesota.

Cc: David S. Miller 
Signed-off-by: Phillip Potter 
Link: https://lore.kernel.org/r/20210503115736.2104747-48-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman