linux-stable.git/drivers/iommu, branch linux-3.4.y

iommu/vt-d: Fix ATSR handling for Root-Complex integrated endpoints

2016-10-26T15:15:25+00:00

commit d14053b3c714178525f22660e6aaf41263d00056 upstream.

The VT-d specification says that "Software must enable ATS on endpoint
devices behind a Root Port only if the Root Port is reported as
supporting ATS transactions."

We walk up the tree to find a Root Port, but for integrated devices we
don't find one — we get to the host bridge. In that case we *should*
allow ATS. Currently we don't, which means that we are incorrectly
failing to use ATS for the integrated graphics. Fix that.

We should never break out of this loop "naturally" with bus==NULL,
since we'll always find bridge==NULL in that case (and now return 1).

So remove the check for (!bridge) after the loop, since it can never
happen. If it did, it would be worthy of a BUG_ON(!bridge). But since
it'll oops anyway in that case, that'll do just as well.

Signed-off-by: David Woodhouse 
[lizf: Backported to 3.4:
 - adjust context
 - drop the last part of the changes of the patch]
Signed-off-by: Zefan Li

iommu/amd: Don't clear DTE flags when modifying it

2016-04-27T10:55:28+00:00

commit cbf3ccd09d683abf1cacd36e3640872ee912d99b upstream.

During device assignment/deassignment the flags in the DTE
get lost, which might cause spurious faults, for example
when the device tries to access the system management range.
Fix this by not clearing the flags with the rest of the DTE.

Reported-by: G. Richard Bellamy 
Tested-by: G. Richard Bellamy 
Signed-off-by: Joerg Roedel 
Signed-off-by: Zefan Li

iommu/vt-d: fix range computation when making room for large pages

2016-04-27T10:55:28+00:00

commit ba2374fd2bf379f933773811fdb06cb6a5445f41 upstream.

In preparation for the installation of a large page, any small page
tables that may still exist in the target IOV address range are
removed.  However, if a scatter/gather list entry is large enough to
fit more than one large page, the address space for any subsequent
large pages is not cleared of conflicting small page tables.

This can cause legitimate mapping requests to fail with errors of the
form below, potentially followed by a series of IOMMU faults:

ERROR: DMA PTE for vPFN 0xfde00 already set (to 7f83a4003 not 7e9e00083)

In this example, a 4MiB scatter/gather list entry resulted in the
successful installation of a large page @ vPFN 0xfdc00, followed by
a failed attempt to install another large page @ vPFN 0xfde00, due to
the presence of a pointer to a small page table @ 0x7f83a4000.

To address this problem, compute the number of large pages that fit
into a given scatter/gather list entry, and use it to derive the
last vPFN covered by the large page(s).

Signed-off-by: Christian Zander 
Signed-off-by: David Woodhouse 
[bwh: Backported to 3.2:
 - Add the lvl_pages variable, added by an earlier commit upstream
 - Also change arguments to dma_pte_clear_range(), which is called by
   dma_pte_free_pagetable() upstream]
Signed-off-by: Ben Hutchings 
Signed-off-by: Zefan Li

iommu/vt-d: Fix an off-by-one bug in __domain_mapping()

2015-04-14T09:33:44+00:00

commit cc4f14aa170d895c9a43bdb56f62070c8a6da908 upstream.

There's an off-by-one bug in function __domain_mapping(), which may
trigger the BUG_ON(nr_pages < lvl_pages) when
	(nr_pages + 1) & superpage_mask == 0

The issue was introduced by commit 9051aa0268dc "intel-iommu: Combine
domain_pfn_mapping() and domain_sg_mapping()", which sets sg_res to
"nr_pages + 1" to avoid some of the 'sg_res==0' code paths.

It's safe to remove extra "+1" because sg_res is only used to calculate
page size now.

Reported-And-Tested-by: Sudeep Dutt 
Signed-off-by: Jiang Liu 
Acked-By: David Woodhouse 
Signed-off-by: Joerg Roedel 
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li

iommu/amd: Fix cleanup_domain for mass device removal

2014-09-25T03:49:11+00:00

commit 9b29d3c6510407d91786c1cf9183ff4debb3473a upstream.

When multiple devices are detached in __detach_device, they
are also removed from the domains dev_list. This makes it
unsafe to use list_for_each_entry_safe, as the next pointer
might also not be in the list anymore after __detach_device
returns. So just repeatedly remove the first element of the
list until it is empty.

Tested-by: Marti Raudsepp 
Signed-off-by: Joerg Roedel 
Signed-off-by: Zefan Li

iommu/vt-d: Disable translation if already enabled

2014-07-28T14:06:46+00:00

commit 3a93c841c2b3b14824f7728dd74bd00a1cedb806 upstream.

This patch disables translation(dma-remapping) before its initialization
if it is already enabled.

This is needed for kexec/kdump boot. If dma-remapping is enabled in the
first kernel, it need to be disabled before initializing its page table
during second kernel boot. Wei Hu also reported that this is needed
when second kernel boots with intel_iommu=off.

Basically iommu->gcmd is used to know whether translation is enabled or
disabled, but it is always zero at boot time even when translation is
enabled since iommu->gcmd is initialized without considering such a
case. Therefor this patch synchronizes iommu->gcmd value with global
command register when iommu structure is allocated.

Signed-off-by: Takao Indoh 
Signed-off-by: Joerg Roedel 
[wyj: Backported to 3.4: adjust context]
Signed-off-by: Yijing Wang 
Signed-off-by: Greg Kroah-Hartman

intel-iommu: fix off-by-one in pagetable freeing

2014-02-13T19:51:08+00:00

commit 08336fd218e087cc4fcc458e6b6dcafe8702b098 upstream.

dma_pte_free_level() has an off-by-one error when checking whether a pte
is completely covered by a range.  Take for example the case of
attempting to free pfn 0x0 - 0x1ff, ie.  512 entries covering the first
2M superpage.

The level_size() is 0x200 and we test:

  static void dma_pte_free_level(...
	...

	if (!(0 > 0 || 0x1ff < 0 + 0x200)) {
		...
	}

Clearly the 2nd test is true, which means we fail to take the branch to
clear and free the pagetable entry.  As a result, we're leaking
pagetables and failing to install new pages over the range.

This was found with a PCI device assigned to a QEMU guest using vfio-pci
without a VGA device present.  The first 1M of guest address space is
mapped with various combinations of 4K pages, but eventually the range
is entirely freed and replaced with a 2M contiguous mapping.
intel-iommu errors out with something like:

  ERROR: DMA PTE for vPFN 0x0 already set (to 5c2b8003 not 849c00083)

In this case 5c2b8003 is the pointer to the previous leaf page that was
neither freed nor cleared and 849c00083 is the superpage entry that
we're trying to replace it with.

Signed-off-by: Alex Williamson 
Cc: David Woodhouse 
Cc: Joerg Roedel 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

iommu/vt-d: Fixed interaction of VFIO_IOMMU_MAP_DMA with IOMMU address limits

2013-12-08T15:29:43+00:00

commit f9423606ade08653dd8a43334f0a7fb45504c5cc upstream.

The BUG_ON in drivers/iommu/intel-iommu.c:785 can be triggered from userspace via
VFIO by calling the VFIO_IOMMU_MAP_DMA ioctl on a vfio device with any address
beyond the addressing capabilities of the IOMMU. The problem is that the ioctl code
calls iommu_iova_to_phys before it calls iommu_map. iommu_map handles the case that
it gets addresses beyond the addressing capabilities of its IOMMU.
intel_iommu_iova_to_phys does not.

This patch fixes iommu_iova_to_phys to return NULL for addresses beyond what the
IOMMU can handle. This in turn causes the ioctl call to fail in iommu_map and
(correctly) return EFAULT to the user with a helpful warning message in the kernel
log.

Signed-off-by: Julian Stecklina 
Acked-by: Alex Williamson 
Signed-off-by: Joerg Roedel 
Signed-off-by: Greg Kroah-Hartman

intel-iommu: Fix leaks in pagetable freeing

2013-09-27T00:15:50+00:00

commit 3269ee0bd6686baf86630300d528500ac5b516d7 upstream.

At best the current code only seems to free the leaf pagetables and
the root.  If you're unlucky enough to have a large gap (like any
QEMU guest with more than 3G of memory), only the first chunk of leaf
pagetables are freed (plus the root).  This is a massive memory leak.
This patch re-writes the pagetable freeing function to use a
recursive algorithm and manages to not only free all the pagetables,
but does it without any apparent performance loss versus the current
broken version.

Signed-off-by: Alex Williamson 
Reviewed-by: Marcelo Tosatti 
Signed-off-by: Joerg Roedel 
Signed-off-by: Greg Kroah-Hartman

iommu/amd: Only unmap large pages from the first pte

2013-07-28T23:25:47+00:00

commit 60d0ca3cfd199b6612bbbbf4999a3470dad38bb1 upstream.

If we use a large mapping, the expectation is that only unmaps from
the first pte in the superpage are supported.  Unmaps from offsets
into the superpage should fail (ie. return zero sized unmap).  In the
current code, unmapping from an offset clears the size of the full
mapping starting from an offset.  For instance, if we map a 16k
physically contiguous range at IOVA 0x0 with a large page, then
attempt to unmap 4k at offset 12k, 4 ptes are cleared (12k - 28k) and
the unmap returns 16k unmapped.  This potentially incorrectly clears
valid mappings and confuses drivers like VFIO that use the unmap size
to release pinned pages.

Fix by refusing to unmap from offsets into the page.

Signed-off-by: Alex Williamson 
Signed-off-by: Joerg Roedel 
Signed-off-by: Greg Kroah-Hartman