<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/drivers/input, branch v6.18.39</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>Input: maplecontrol - set driver data before registering input device</title>
<updated>2026-07-18T14:53:35+00:00</updated>
<author>
<name>Dmitry Torokhov</name>
<email>dmitry.torokhov@gmail.com</email>
</author>
<published>2026-06-30T05:49:15+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=95de76f6ad4743dc6c350e170522c74ef93e62bb'/>
<id>95de76f6ad4743dc6c350e170522c74ef93e62bb</id>
<content type='text'>
commit fe938ee497d58c644f6910cfe6ae155f6fb3e523 upstream.

Set maple driver data before calling input_register_device() to
ensure that it is available if the device is opened immediately and
the callback is triggered.

Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Tested-by: Florian Fuchs &lt;fuchsfl@gmail.com&gt;
Link: https://patch.msgid.link/akNYib9hQFNN1fA9@google.com
Signed-off-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit fe938ee497d58c644f6910cfe6ae155f6fb3e523 upstream.

Set maple driver data before calling input_register_device() to
ensure that it is available if the device is opened immediately and
the callback is triggered.

Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Tested-by: Florian Fuchs &lt;fuchsfl@gmail.com&gt;
Link: https://patch.msgid.link/akNYib9hQFNN1fA9@google.com
Signed-off-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Input: maplemouse - set driver data before registering input device</title>
<updated>2026-07-18T14:53:35+00:00</updated>
<author>
<name>Dmitry Torokhov</name>
<email>dmitry.torokhov@gmail.com</email>
</author>
<published>2026-06-30T05:47:34+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=9376c744bea2c1fc759443802a3a4dad14cf4498'/>
<id>9376c744bea2c1fc759443802a3a4dad14cf4498</id>
<content type='text'>
commit 738f24bbbc95dd50cb4229d1ed62a05f29db2bda upstream.

Set maple driver data before calling input_register_device() to
ensure that it is available if the device is opened immediately and
the callback is triggered.

Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Tested-by: Florian Fuchs &lt;fuchsfl@gmail.com&gt;
Link: https://patch.msgid.link/akNXw45L_8bxD6QV@google.com
Signed-off-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 738f24bbbc95dd50cb4229d1ed62a05f29db2bda upstream.

Set maple driver data before calling input_register_device() to
ensure that it is available if the device is opened immediately and
the callback is triggered.

Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Tested-by: Florian Fuchs &lt;fuchsfl@gmail.com&gt;
Link: https://patch.msgid.link/akNXw45L_8bxD6QV@google.com
Signed-off-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Input: maple_keyb - set driver data before registering input device</title>
<updated>2026-07-18T14:53:35+00:00</updated>
<author>
<name>Dmitry Torokhov</name>
<email>dmitry.torokhov@gmail.com</email>
</author>
<published>2026-06-30T01:44:41+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=699e3abac02de62080c9a95c26b38aec694e415c'/>
<id>699e3abac02de62080c9a95c26b38aec694e415c</id>
<content type='text'>
commit 536394ec81419b67d9f4f0028812c4372397be1b upstream.

Set maple driver data before calling input_register_device() to
ensure that it is available if the device is opened immediately and
the callback is triggered.

Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 536394ec81419b67d9f4f0028812c4372397be1b upstream.

Set maple driver data before calling input_register_device() to
ensure that it is available if the device is opened immediately and
the callback is triggered.

Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Input: mms114 - fix multi-touch slot corruption</title>
<updated>2026-07-18T14:53:35+00:00</updated>
<author>
<name>Dmitry Torokhov</name>
<email>dmitry.torokhov@gmail.com</email>
</author>
<published>2026-07-04T06:01:12+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=d7f66fbab5d212840d81b410ddc63780a8d54c4a'/>
<id>d7f66fbab5d212840d81b410ddc63780a8d54c4a</id>
<content type='text'>
commit adea84ee6cdea611146c4251d3c1616f5a09feca upstream.

If the touchscreen controller reports a touch ID of 0, the driver
calculates the slot ID as touch-&gt;id - 1, which underflows to UINT_MAX.
This is passed to input_mt_slot() as -1.

Since the input core ignores negative slot values, the active slot remains
unchanged. The driver then reports the touch coordinates for the previously
active slot, corrupting its state.

Fix this by rejecting touch reports with ID 0.

Fixes: 07b8481d4aff ("Input: add MELFAS mms114 touchscreen driver")
Cc: stable@vger.kernel.org
Reported-by: sashiko-bot@kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260704060115.353049-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit adea84ee6cdea611146c4251d3c1616f5a09feca upstream.

If the touchscreen controller reports a touch ID of 0, the driver
calculates the slot ID as touch-&gt;id - 1, which underflows to UINT_MAX.
This is passed to input_mt_slot() as -1.

Since the input core ignores negative slot values, the active slot remains
unchanged. The driver then reports the touch coordinates for the previously
active slot, corrupting its state.

Fix this by rejecting touch reports with ID 0.

Fixes: 07b8481d4aff ("Input: add MELFAS mms114 touchscreen driver")
Cc: stable@vger.kernel.org
Reported-by: sashiko-bot@kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260704060115.353049-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Input: maplemouse - fix NULL pointer dereference in open()</title>
<updated>2026-07-18T14:53:35+00:00</updated>
<author>
<name>Florian Fuchs</name>
<email>fuchsfl@gmail.com</email>
</author>
<published>2026-06-30T01:33:42+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=1b4cb75f254fb0224db1b65a1bb1f735a87df01d'/>
<id>1b4cb75f254fb0224db1b65a1bb1f735a87df01d</id>
<content type='text'>
commit ee89db004238bd0b034f2a6176e175561658750b upstream.

Commit 555c765b0cc2 ("Input: mouse - drop unnecessary calls to
input_set_drvdata") dropped the input_set_drvdata() call in probe
because the data appeared to be unused. However, dc_mouse_open() and
dc_mouse_close() were using maple_get_drvdata(to_maple_dev(&amp;dev-&gt;dev)).
This appears to be accessing the data attached to an instance of
maple_device structure, while in reality this actually retrieves driver
data from the input device's embedded struct device (doing invalid
conversion of input device structure to maple device). After
input_set_drvdata() was removed, that lookup started returning NULL and
opening the input device dereferences mse-&gt;mdev.

Restore input_set_drvdata() and convert open() and close() to use
input_get_drvdata() so the dependency is no longer hidden.

Fixes: 6b3480855aad ("maple: input: fix up maple mouse driver")
Fixes: 555c765b0cc2 ("Input: mouse - drop unnecessary calls to input_set_drvdata")
Signed-off-by: Florian Fuchs &lt;fuchsfl@gmail.com&gt;
Link: https://patch.msgid.link/20260628230715.2982552-1-fuchsfl@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit ee89db004238bd0b034f2a6176e175561658750b upstream.

Commit 555c765b0cc2 ("Input: mouse - drop unnecessary calls to
input_set_drvdata") dropped the input_set_drvdata() call in probe
because the data appeared to be unused. However, dc_mouse_open() and
dc_mouse_close() were using maple_get_drvdata(to_maple_dev(&amp;dev-&gt;dev)).
This appears to be accessing the data attached to an instance of
maple_device structure, while in reality this actually retrieves driver
data from the input device's embedded struct device (doing invalid
conversion of input device structure to maple device). After
input_set_drvdata() was removed, that lookup started returning NULL and
opening the input device dereferences mse-&gt;mdev.

Restore input_set_drvdata() and convert open() and close() to use
input_get_drvdata() so the dependency is no longer hidden.

Fixes: 6b3480855aad ("maple: input: fix up maple mouse driver")
Fixes: 555c765b0cc2 ("Input: mouse - drop unnecessary calls to input_set_drvdata")
Signed-off-by: Florian Fuchs &lt;fuchsfl@gmail.com&gt;
Link: https://patch.msgid.link/20260628230715.2982552-1-fuchsfl@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Input: gscps2 - advance receive buffer write index</title>
<updated>2026-07-18T14:53:35+00:00</updated>
<author>
<name>Xu Rao</name>
<email>raoxu@uniontech.com</email>
</author>
<published>2026-06-24T09:47:39+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=37fbe63bccf21e3b98636f6ed4f9bd7891baaefd'/>
<id>37fbe63bccf21e3b98636f6ed4f9bd7891baaefd</id>
<content type='text'>
commit d86d4f8cbb5a55a3b9b86f7b5ab8c4cdda600a3f upstream.

Commit 44f920069911 ("Input: gscps2 - use guard notation when
acquiring spinlock") moved the receive loop into gscps2_read_data()
and gscps2_report_data().

While moving the code, it preserved the writes to
buffer[ps2port-&gt;append], but omitted the following producer index
update from the original loop:

	ps2port-&gt;append = (ps2port-&gt;append + 1) &amp; BUFFER_SIZE;

As a result, append never advances. Since gscps2_report_data() only
reports bytes while act != append, the receive buffer always appears
empty and no keyboard or mouse data reaches the serio core.

Restore the omitted index update.

Fixes: 44f920069911 ("Input: gscps2 - use guard notation when acquiring spinlock")
Cc: stable@vger.kernel.org # 6.13+
Signed-off-by: Xu Rao &lt;raoxu@uniontech.com&gt;
Link: https://patch.msgid.link/460B5655BA580C60+20260624094739.850306-1-raoxu@uniontech.com
Signed-off-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit d86d4f8cbb5a55a3b9b86f7b5ab8c4cdda600a3f upstream.

Commit 44f920069911 ("Input: gscps2 - use guard notation when
acquiring spinlock") moved the receive loop into gscps2_read_data()
and gscps2_report_data().

While moving the code, it preserved the writes to
buffer[ps2port-&gt;append], but omitted the following producer index
update from the original loop:

	ps2port-&gt;append = (ps2port-&gt;append + 1) &amp; BUFFER_SIZE;

As a result, append never advances. Since gscps2_report_data() only
reports bytes while act != append, the receive buffer always appears
empty and no keyboard or mouse data reaches the serio core.

Restore the omitted index update.

Fixes: 44f920069911 ("Input: gscps2 - use guard notation when acquiring spinlock")
Cc: stable@vger.kernel.org # 6.13+
Signed-off-by: Xu Rao &lt;raoxu@uniontech.com&gt;
Link: https://patch.msgid.link/460B5655BA580C60+20260624094739.850306-1-raoxu@uniontech.com
Signed-off-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Input: mms114 - reject an oversized device packet size</title>
<updated>2026-07-18T14:53:35+00:00</updated>
<author>
<name>Bryam Vargas</name>
<email>hexlabsecurity@proton.me</email>
</author>
<published>2026-06-14T21:19:43+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=8301c335305344d4da4ab9442b6a399dacfe5b8d'/>
<id>8301c335305344d4da4ab9442b6a399dacfe5b8d</id>
<content type='text'>
commit 66725039f7090afe14c31bd259e2059a68f04023 upstream.

mms114_interrupt() reads a packet of touch data from the device into a
fixed-size on-stack buffer

	struct mms114_touch touch[MMS114_MAX_TOUCH];

which holds MMS114_MAX_TOUCH (10) events of MMS114_EVENT_SIZE (8) bytes,
i.e. 80 bytes. The length of the I2C read into it is taken verbatim from
the device:

	packet_size = mms114_read_reg(data, MMS114_PACKET_SIZE);
	if (packet_size &lt;= 0)
		goto out;
	...
	error = __mms114_read_reg(data, MMS114_INFORMATION, packet_size,
			(u8 *)touch);

packet_size is a single device register byte (0x0F) and the only check
is the lower bound packet_size &lt;= 0; it is never bounded against the
size of touch[]. A malfunctioning, malicious or counterfeit controller
(or an attacker tampering with the I2C bus) can report a packet_size of
up to 255, so __mms114_read_reg() writes up to 175 bytes past the end of
touch[] on the IRQ-thread stack: a stack out-of-bounds write that can
overwrite the stack canary, saved registers and the return address.

A well-formed device never reports more than the buffer holds, so reject
an oversized packet and drop the report, consistent with the handler's
other error paths, rather than reading past the buffer.

Fixes: 07b8481d4aff ("Input: add MELFAS mms114 touchscreen driver")
Signed-off-by: Bryam Vargas &lt;hexlabsecurity@proton.me&gt;
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260612-b4-disp-dc4b8dc4-v1-1-d7cb0a828d92@proton.me
Signed-off-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 66725039f7090afe14c31bd259e2059a68f04023 upstream.

mms114_interrupt() reads a packet of touch data from the device into a
fixed-size on-stack buffer

	struct mms114_touch touch[MMS114_MAX_TOUCH];

which holds MMS114_MAX_TOUCH (10) events of MMS114_EVENT_SIZE (8) bytes,
i.e. 80 bytes. The length of the I2C read into it is taken verbatim from
the device:

	packet_size = mms114_read_reg(data, MMS114_PACKET_SIZE);
	if (packet_size &lt;= 0)
		goto out;
	...
	error = __mms114_read_reg(data, MMS114_INFORMATION, packet_size,
			(u8 *)touch);

packet_size is a single device register byte (0x0F) and the only check
is the lower bound packet_size &lt;= 0; it is never bounded against the
size of touch[]. A malfunctioning, malicious or counterfeit controller
(or an attacker tampering with the I2C bus) can report a packet_size of
up to 255, so __mms114_read_reg() writes up to 175 bytes past the end of
touch[] on the IRQ-thread stack: a stack out-of-bounds write that can
overwrite the stack canary, saved registers and the return address.

A well-formed device never reports more than the buffer holds, so reject
an oversized packet and drop the report, consistent with the handler's
other error paths, rather than reading past the buffer.

Fixes: 07b8481d4aff ("Input: add MELFAS mms114 touchscreen driver")
Signed-off-by: Bryam Vargas &lt;hexlabsecurity@proton.me&gt;
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260612-b4-disp-dc4b8dc4-v1-1-d7cb0a828d92@proton.me
Signed-off-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Input: touchwin - reset the packet index on every complete packet</title>
<updated>2026-07-18T14:53:34+00:00</updated>
<author>
<name>Bryam Vargas</name>
<email>hexlabsecurity@proton.me</email>
</author>
<published>2026-06-14T01:07:20+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=3e6f007b43e2fc6546e21fa74ee62c38984a6672'/>
<id>3e6f007b43e2fc6546e21fa74ee62c38984a6672</id>
<content type='text'>
commit 478cdd736f2ce3114f90e775d7358136d3977b94 upstream.

tw_interrupt() accumulates each non-zero serial byte into a fixed
three-byte buffer with a running index that is only reset once a full
packet has been received *and* the device's two Y bytes agree:

	tw-&gt;data[tw-&gt;idx++] = data;
	if (tw-&gt;idx == TW_LENGTH &amp;&amp; tw-&gt;data[1] == tw-&gt;data[2]) {
		...
		tw-&gt;idx = 0;
	}

The reset is gated on tw-&gt;data[1] == tw-&gt;data[2], a value the device
controls.  A malicious, malfunctioning or counterfeit Touchwindow
peripheral can stream non-zero bytes whose 2nd and 3rd bytes differ: the
index reaches TW_LENGTH without the equality holding, is never reset, and
keeps growing, so tw-&gt;data[tw-&gt;idx++] walks off the end of the three-byte
array and the rest of the heap-allocated struct tw, one attacker-chosen
byte at a time -- an unbounded, device-driven heap out-of-bounds write.

Reset the index on every completed packet and report an event only when
the two Y bytes match, like the other serio touchscreen drivers do.

Fixes: 11ea3173d5f2 ("Input: add driver for Touchwin serial touchscreens")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas &lt;hexlabsecurity@proton.me&gt;
Link: https://patch.msgid.link/20260613-b4-disp-69921bfd-v1-1-82c036899959@proton.me
Signed-off-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 478cdd736f2ce3114f90e775d7358136d3977b94 upstream.

tw_interrupt() accumulates each non-zero serial byte into a fixed
three-byte buffer with a running index that is only reset once a full
packet has been received *and* the device's two Y bytes agree:

	tw-&gt;data[tw-&gt;idx++] = data;
	if (tw-&gt;idx == TW_LENGTH &amp;&amp; tw-&gt;data[1] == tw-&gt;data[2]) {
		...
		tw-&gt;idx = 0;
	}

The reset is gated on tw-&gt;data[1] == tw-&gt;data[2], a value the device
controls.  A malicious, malfunctioning or counterfeit Touchwindow
peripheral can stream non-zero bytes whose 2nd and 3rd bytes differ: the
index reaches TW_LENGTH without the equality holding, is never reset, and
keeps growing, so tw-&gt;data[tw-&gt;idx++] walks off the end of the three-byte
array and the rest of the heap-allocated struct tw, one attacker-chosen
byte at a time -- an unbounded, device-driven heap out-of-bounds write.

Reset the index on every completed packet and report an event only when
the two Y bytes match, like the other serio touchscreen drivers do.

Fixes: 11ea3173d5f2 ("Input: add driver for Touchwin serial touchscreens")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas &lt;hexlabsecurity@proton.me&gt;
Link: https://patch.msgid.link/20260613-b4-disp-69921bfd-v1-1-82c036899959@proton.me
Signed-off-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Input: ads7846 - don't use scratch for tx_buf when clearing register</title>
<updated>2026-07-18T14:53:34+00:00</updated>
<author>
<name>Kris Bahnsen</name>
<email>kris@embeddedTS.com</email>
</author>
<published>2026-05-07T16:49:43+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=05dee4007cf3029163ac6c09f2b313b7cd177cff'/>
<id>05dee4007cf3029163ac6c09f2b313b7cd177cff</id>
<content type='text'>
commit 856668312685d9a8f32d49a135a89c429d309f81 upstream.

The workaround for XPT2046 clears the command register, giving the
touchscreen controller a NOP. The change incorrectly re-uses the
req-&gt;scratch variable which is used as rx_buf for xfer[5], so by
the time xfer[6] occurs, the contents of req-&gt;scratch may not be
0. It was found that the touchscreen controller can end up in
a completely unresponsive state due to it being given a command
the driver does not expect.

Instead, rely on the spi_transfer behavior of tx_buf being NULL to
transmit all 0 bits and use the scratch variable for the rx_buf for
both the 1 byte command to and 2 byte response from the controller.

Also relocates the scratch member of struct ser_req to force it
into a different cache line to prevent any potential issues of
DMA stepping on unrelated data in other struct members due to
sharing the same cache line.

This change was tested on real TSC2046 and ADS7843 controllers,
but not the XPT2046 the workaround was originally created for.
Confirming that the original modification to clear the command
register does not impact either real controller.

Fixes: 781a07da9bb94 ("Input: ads7846 - add dummy command register clearing cycle")
Cc: stable@vger.kernel.org
Co-developed-by: Mark Featherston &lt;mark@embeddedTS.com&gt;
Signed-off-by: Mark Featherston &lt;mark@embeddedTS.com&gt;
Signed-off-by: Kris Bahnsen &lt;kris@embeddedTS.com&gt;
Link: https://patch.msgid.link/20260507164943.760009-1-kris@embeddedTS.com
Signed-off-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 856668312685d9a8f32d49a135a89c429d309f81 upstream.

The workaround for XPT2046 clears the command register, giving the
touchscreen controller a NOP. The change incorrectly re-uses the
req-&gt;scratch variable which is used as rx_buf for xfer[5], so by
the time xfer[6] occurs, the contents of req-&gt;scratch may not be
0. It was found that the touchscreen controller can end up in
a completely unresponsive state due to it being given a command
the driver does not expect.

Instead, rely on the spi_transfer behavior of tx_buf being NULL to
transmit all 0 bits and use the scratch variable for the rx_buf for
both the 1 byte command to and 2 byte response from the controller.

Also relocates the scratch member of struct ser_req to force it
into a different cache line to prevent any potential issues of
DMA stepping on unrelated data in other struct members due to
sharing the same cache line.

This change was tested on real TSC2046 and ADS7843 controllers,
but not the XPT2046 the workaround was originally created for.
Confirming that the original modification to clear the command
register does not impact either real controller.

Fixes: 781a07da9bb94 ("Input: ads7846 - add dummy command register clearing cycle")
Cc: stable@vger.kernel.org
Co-developed-by: Mark Featherston &lt;mark@embeddedTS.com&gt;
Signed-off-by: Mark Featherston &lt;mark@embeddedTS.com&gt;
Signed-off-by: Kris Bahnsen &lt;kris@embeddedTS.com&gt;
Link: https://patch.msgid.link/20260507164943.760009-1-kris@embeddedTS.com
Signed-off-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Input: mms114 - fix touch indexing for MMS134S and MMS136</title>
<updated>2026-07-18T14:53:34+00:00</updated>
<author>
<name>Dmitry Torokhov</name>
<email>dmitry.torokhov@gmail.com</email>
</author>
<published>2026-06-23T05:35:18+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=75b12874b4172533b9efc349db328cb1a59c3981'/>
<id>75b12874b4172533b9efc349db328cb1a59c3981</id>
<content type='text'>
commit a6ac4e24c1a8a533bb61035184fdcc7eede4cc8d upstream.

The MMS134S and MMS136 touch controllers have an event size of 6 bytes
rather than 8 bytes. When __mms114_read_reg() reads the touch data
packet from the device into the touch buffer, the events are packed
tightly at 6-byte intervals. However, the driver iterates through the
events using standard C array indexing (touch[index]), where each
element is sizeof(struct mms114_touch) (8 bytes) apart. As a result, any
touch events beyond the first one are read from incorrect offsets and
parsed improperly.

Fix this by explicitly calculating the byte offset for each touch event
based on the device's specific event size.

Fixes: 53fefdd1d3a3 ("Input: mms114 - support MMS136")
Fixes: ab108678195f ("Input: mms114 - support MMS134S")
Reported-by: sashiko-bot@kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Reviewed-by: Bryam Vargas &lt;hexlabsecurity@proton.me&gt;
Link: https://patch.msgid.link/20260616050912.1531241-1-dmitry.torokhov@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit a6ac4e24c1a8a533bb61035184fdcc7eede4cc8d upstream.

The MMS134S and MMS136 touch controllers have an event size of 6 bytes
rather than 8 bytes. When __mms114_read_reg() reads the touch data
packet from the device into the touch buffer, the events are packed
tightly at 6-byte intervals. However, the driver iterates through the
events using standard C array indexing (touch[index]), where each
element is sizeof(struct mms114_touch) (8 bytes) apart. As a result, any
touch events beyond the first one are read from incorrect offsets and
parsed improperly.

Fix this by explicitly calculating the byte offset for each touch event
based on the device's specific event size.

Fixes: 53fefdd1d3a3 ("Input: mms114 - support MMS136")
Fixes: ab108678195f ("Input: mms114 - support MMS134S")
Reported-by: sashiko-bot@kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Reviewed-by: Bryam Vargas &lt;hexlabsecurity@proton.me&gt;
Link: https://patch.msgid.link/20260616050912.1531241-1-dmitry.torokhov@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
