linux-stable.git/drivers/input, branch v5.4.264

Input: xpad - add HyperX Clutch Gladiate Support

2023-12-08T07:44:27+00:00

commit e28a0974d749e5105d77233c0a84d35c37da047e upstream.

Add HyperX controller support to xpad_device and xpad_table.

Suggested-by: Chris Toledanes 
Reviewed-by: Carl Ng 
Signed-off-by: Max Nguyen 
Reviewed-by: Rahul Rameshbabu 
Link: https://lore.kernel.org/r/20230906231514.4291-1-hphyperxdev@gmail.com
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: synaptics-rmi4 - fix use after free in rmi_unregister_function()

2023-11-20T09:30:15+00:00

[ Upstream commit eb988e46da2e4eae89f5337e047ce372fe33d5b1 ]

The put_device() calls rmi_release_function() which frees "fn" so the
dereference on the next line "fn->num_of_irqs" is a use after free.
Move the put_device() to the end to fix this.

Fixes: 24d28e4f1271 ("Input: synaptics-rmi4 - convert irq distribution to irq_domain")
Signed-off-by: Dan Carpenter 
Link: https://lore.kernel.org/r/706efd36-7561-42f3-adfa-dd1d0bd4f5a1@moroto.mountain
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: synaptics-rmi4 - handle reset delay when using SMBus trsnsport

2023-11-08T10:23:40+00:00

[ Upstream commit 5030b2fe6aab37fe42d14f31842ea38be7c55c57 ]

Touch controllers need some time after receiving reset command for the
firmware to finish re-initializing and be ready to respond to commands
from the host. The driver already had handling for the post-reset delay
for I2C and SPI transports, this change adds the handling to
SMBus-connected devices.

SMBus devices are peculiar because they implement legacy PS/2
compatibility mode, so reset is actually issued by psmouse driver on the
associated serio port, after which the control is passed to the RMI4
driver with SMBus companion device.

Note that originally the delay was added to psmouse driver in
92e24e0e57f7 ("Input: psmouse - add delay when deactivating for SMBus
mode"), but that resulted in an unwanted delay in "fast" reconnect
handler for the serio port, so it was decided to revert the patch and
have the delay being handled in the RMI4 driver, similar to the other
transports.

Tested-by: Jeffery Miller 
Link: https://lore.kernel.org/r/ZR1yUFJ8a9Zt606N@penguin
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: i8042 - add Fujitsu Lifebook E5411 to i8042 quirk table

2023-11-08T10:23:40+00:00

[ Upstream commit 80f39e1c27ba9e5a1ea7e68e21c569c9d8e46062 ]

In the initial boot stage the integrated keyboard of Fujitsu Lifebook E5411
refuses to work and it's not possible to type for example a dm-crypt
passphrase without the help of an external keyboard.

i8042.nomux kernel parameter resolves this issue but using that a PS/2
mouse is detected. This input device is unused even when the i2c-hid-acpi
kernel module is blacklisted making the integrated ELAN touchpad
(04F3:308A) not working at all.

Since the integrated touchpad is managed by the i2c_designware input
driver in the Linux kernel and you can't find a PS/2 mouse port on the
computer I think it's safe to not use the PS/2 mouse port at all.

Signed-off-by: Szilard Fabian 
Link: https://lore.kernel.org/r/20231004011749.101789-1-szfabian@bluemarch.art
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: xpad - add PXN V900 support

2023-10-25T09:53:19+00:00

commit a65cd7ef5a864bdbbe037267c327786b7759d4c6 upstream.

Add VID and PID to the xpad_device table to allow driver to use the PXN
V900 steering wheel, which is XTYPE_XBOX360 compatible in xinput mode.

Signed-off-by: Matthias Berndt 
Link: https://lore.kernel.org/r/4932699.31r3eYUQgx@fedora
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: psmouse - fix fast_reconnect function for PS/2 mode

2023-10-25T09:53:19+00:00

commit e2cb5cc822b6c9ee72c56ce1d81671b22c05406a upstream.

When the SMBus connection is attempted psmouse_smbus_init() sets
the fast_reconnect pointer to psmouse_smbus_reconnecti(). If SMBus
initialization fails, elantech_setup_ps2() and synaptics_init_ps2() will
fallback to PS/2 mode, replacing the psmouse private data. This can cause
issues on resume, since psmouse_smbus_reconnect() expects to find an
instance of struct psmouse_smbus_dev in psmouse->private.

The issue was uncovered when in 92e24e0e57f7 ("Input: psmouse - add
delay when deactivating for SMBus mode") psmouse_smbus_reconnect()
started attempting to use more of the data structure. The commit was
since reverted, not because it was at fault, but because there was found
a better way of doing what it was attempting to do.

Fix the problem by resetting the fast_reconnect pointer in psmouse
structure in elantech_setup_ps2() and synaptics_init_ps2() when the PS/2
mode is used.

Reported-by: Thorsten Leemhuis 
Tested-by: Thorsten Leemhuis 
Signed-off-by: Jeffery Miller 
Fixes: bf232e460a35 ("Input: psmouse-smbus - allow to control psmouse_deactivate")
Link: https://lore.kernel.org/r/20231005002249.554877-1-jefferymiller@google.com
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: powermate - fix use-after-free in powermate_config_complete

2023-10-25T09:53:19+00:00

commit 5c15c60e7be615f05a45cd905093a54b11f461bc upstream.

syzbot has found a use-after-free bug [1] in the powermate driver. This
happens when the device is disconnected, which leads to a memory free from
the powermate_device struct.  When an asynchronous control message
completes after the kfree and its callback is invoked, the lock does not
exist anymore and hence the bug.

Use usb_kill_urb() on pm->config to cancel any in-progress requests upon
device disconnection.

[1] https://syzkaller.appspot.com/bug?extid=0434ac83f907a1dbdd1e

Signed-off-by: Javier Carrasco 
Reported-by: syzbot+0434ac83f907a1dbdd1e@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20230916-topic-powermate_use_after_free-v3-1-64412b81a7a2@gmail.com
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: i8042 - add quirk for TUXEDO Gemini 17 Gen1/Clevo PD70PN

2023-10-10T19:46:38+00:00

[ Upstream commit eb09074bdb05ffd6bfe77f8b4a41b76ef78c997b ]

The touchpad of this device is both connected via PS/2 and i2c. This causes
strange behavior when both driver fight for control. The easy fix is to
prevent the PS/2 driver from accessing the mouse port as the full feature
set of the touchpad is only supported in the i2c interface anyway.

The strange behavior in this case is, that when an external screen is
connected and the notebook is closed, the pointer on the external screen is
moving to the lower right corner. When the notebook is opened again, this
movement stops, but the touchpad clicks are unresponsive afterwards until
reboot.

Signed-off-by: Werner Sembach 
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230607173331.851192-1-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: adxl34x - do not hardcode interrupt trigger type

2023-07-27T06:37:13+00:00

[ Upstream commit e96220bce5176ed2309f77f061dcc0430b82b25e ]

Instead of hardcoding IRQ trigger type to IRQF_TRIGGER_HIGH, let's
respect the settings specified in the firmware description.

Fixes: e27c729219ad ("Input: add driver for ADXL345/346 Digital Accelerometers")
Signed-off-by: Marek Vasut 
Acked-by: Michael Hennerich 
Link: https://lore.kernel.org/r/20230509203555.549158-1-marex@denx.de
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: drv260x - sleep between polling GO bit

2023-07-27T06:37:12+00:00

[ Upstream commit efef661dfa6bf8cbafe4cd6a97433fcef0118967 ]

When doing the initial startup there's no need to poll without any
delay and spam the I2C bus.

Let's sleep 15ms between each attempt, which is the same time as used
in the vendor driver.

Fixes: 7132fe4f5687 ("Input: drv260x - add TI drv260x haptics driver")
Signed-off-by: Luca Weiss 
Link: https://lore.kernel.org/r/20230430-drv260x-improvements-v1-2-1fb28b4cc698@z3ntu.xyz
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin