linux-stable.git/drivers/input, branch v5.18.4

Input: bcm5974 - set missing URB_NO_TRANSFER_DMA_MAP urb flag

2022-06-14T16:45:19+00:00

commit c42e65664390be7c1ef3838cd84956d3a2739d60 upstream.

The bcm5974 driver does the allocation and dma mapping of the usb urb
data buffer, but driver does not set the URB_NO_TRANSFER_DMA_MAP flag
to let usb core know the buffer is already mapped.

usb core tries to map the already mapped buffer, causing a warning:
"xhci_hcd 0000:00:14.0: rejecting DMA map of vmalloc memory"

Fix this by setting the URB_NO_TRANSFER_DMA_MAP, letting usb core
know buffer is already mapped by bcm5974 driver

Signed-off-by: Mathias Nyman 
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215890
Link: https://lore.kernel.org/r/20220606113636.588955-1-mathias.nyman@linux.intel.com
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: stmfts - do not leave device disabled in stmfts_input_open

2022-06-09T08:30:34+00:00

[ Upstream commit 5f76955ab1e43e5795a9631b22ca4f918a0ae986 ]

The commit 26623eea0da3 attempted to deal with potential leak of runtime
PM counter when opening the touchscreen device, however it ended up
erroneously dropping the counter in the case of successfully enabling the
device.

Let's address this by using pm_runtime_resume_and_get() and then executing
pm_runtime_put_sync() only when we fail to send "sense on" command to the
device.

Fixes: 26623eea0da3 ("Input: stmfts - fix reference leak in stmfts_input_open")
Reported-by: Pavel Machek 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: sparcspkr - fix refcount leak in bbc_beep_probe

2022-06-09T08:30:31+00:00

[ Upstream commit c8994b30d71d64d5dcc9bc0edbfdf367171aa96f ]

of_find_node_by_path() calls of_find_node_opts_by_path(),
which returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.

Fixes: 9c1a5077fdca ("input: Rewrite sparcspkr device probing.")
Signed-off-by: Miaoqian Lin 
Link: https://lore.kernel.org/r/20220516081018.42728-1-linmq006@gmail.com
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: gpio-keys - cancel delayed work only in case of GPIO

2022-06-09T08:29:52+00:00

[ Upstream commit cee409bbba0d1bd3fb73064fb480ff365f453b5d ]

gpio_keys module can either accept gpios or interrupts. The module
initializes delayed work in case of gpios only and is only used if
debounce timer is not used, so make sure cancel_delayed_work_sync()
is called only when its gpio-backed and debounce_use_hrtimer is false.

This fixes the issue seen below when the gpio_keys module is unloaded and
an interrupt pin is used instead of GPIO:

[  360.297569] ------------[ cut here ]------------
[  360.302303] WARNING: CPU: 0 PID: 237 at kernel/workqueue.c:3066 __flush_work+0x414/0x470
[  360.310531] Modules linked in: gpio_keys(-)
[  360.314797] CPU: 0 PID: 237 Comm: rmmod Not tainted 5.18.0-rc5-arm64-renesas-00116-g73636105874d-dirty #166
[  360.324662] Hardware name: Renesas SMARC EVK based on r9a07g054l2 (DT)
[  360.331270] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  360.338318] pc : __flush_work+0x414/0x470
[  360.342385] lr : __cancel_work_timer+0x140/0x1b0
[  360.347065] sp : ffff80000a7fba00
[  360.350423] x29: ffff80000a7fba00 x28: ffff000012b9c5c0 x27: 0000000000000000
[  360.357664] x26: ffff80000a7fbb80 x25: ffff80000954d0a8 x24: 0000000000000001
[  360.364904] x23: ffff800009757000 x22: 0000000000000000 x21: ffff80000919b000
[  360.372143] x20: ffff00000f5974e0 x19: ffff00000f5974e0 x18: ffff8000097fcf48
[  360.379382] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000053f40
[  360.386622] x14: ffff800009850e88 x13: 0000000000000002 x12: 000000000000a60c
[  360.393861] x11: 000000000000a610 x10: 0000000000000000 x9 : 0000000000000008
[  360.401100] x8 : 0101010101010101 x7 : 00000000a473c394 x6 : 0080808080808080
[  360.408339] x5 : 0000000000000001 x4 : 0000000000000000 x3 : ffff80000919b458
[  360.415578] x2 : ffff8000097577f0 x1 : 0000000000000001 x0 : 0000000000000000
[  360.422818] Call trace:
[  360.425299]  __flush_work+0x414/0x470
[  360.429012]  __cancel_work_timer+0x140/0x1b0
[  360.433340]  cancel_delayed_work_sync+0x10/0x18
[  360.437931]  gpio_keys_quiesce_key+0x28/0x58 [gpio_keys]
[  360.443327]  devm_action_release+0x10/0x18
[  360.447481]  release_nodes+0x8c/0x1a0
[  360.451194]  devres_release_all+0x90/0x100
[  360.455346]  device_unbind_cleanup+0x14/0x60
[  360.459677]  device_release_driver_internal+0xe8/0x168
[  360.464883]  driver_detach+0x4c/0x90
[  360.468509]  bus_remove_driver+0x54/0xb0
[  360.472485]  driver_unregister+0x2c/0x58
[  360.476462]  platform_driver_unregister+0x10/0x18
[  360.481230]  gpio_keys_exit+0x14/0x828 [gpio_keys]
[  360.486088]  __arm64_sys_delete_module+0x1e0/0x270
[  360.490945]  invoke_syscall+0x40/0xf8
[  360.494661]  el0_svc_common.constprop.3+0xf0/0x110
[  360.499515]  do_el0_svc+0x20/0x78
[  360.502877]  el0_svc+0x48/0xf8
[  360.505977]  el0t_64_sync_handler+0x88/0xb0
[  360.510216]  el0t_64_sync+0x148/0x14c
[  360.513930] irq event stamp: 4306
[  360.517288] hardirqs last  enabled at (4305): [] __cancel_work_timer+0x130/0x1b0
[  360.526359] hardirqs last disabled at (4306): [] el1_dbg+0x24/0x88
[  360.534204] softirqs last  enabled at (4278): [] _stext+0x4a0/0x5e0
[  360.542133] softirqs last disabled at (4267): [] irq_exit_rcu+0x18c/0x1b0
[  360.550591] ---[ end trace 0000000000000000 ]---

Signed-off-by: Lad Prabhakar 
Link: https://lore.kernel.org/r/20220524135822.14764-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Merge tag 'input-for-v5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2022-05-21T23:58:43+00:00

Pull input fixes from Dmitry Torokhov:
 "A small fixup to ili210x touchscreen driver, and updated maintainer
  entry for the device tree binding of Mediatek 6779 keypad:

   - fix reset timing of Ilitek touchscreens

   - update maintainer entry of DT binding of Mediatek 6779 keypad"

* tag 'input-for-v5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ili210x - use one common reset implementation
  Input: ili210x - fix reset timing
  dt-bindings: input: mediatek,mt6779-keypad: update maintainer

Input: ili210x - use one common reset implementation

2022-05-18T21:31:31+00:00

Rename ili251x_hardware_reset() to ili210x_hardware_reset(), change its
parameter from struct device * to struct gpio_desc *, and use it as one
single consistent reset implementation all over the driver. Also increase
the minimum reset duration to 12ms, to make sure the reset is really
within the spec.

Signed-off-by: Marek Vasut 
Link: https://lore.kernel.org/r/20220518210423.106555-1-marex@denx.de
Signed-off-by: Dmitry Torokhov

Input: ili210x - fix reset timing

2022-05-18T21:31:30+00:00

According to Ilitek "231x & ILI251x Programming Guide" Version: 2.30
"2.1. Power Sequence", "T4 Chip Reset and discharge time" is minimum
10ms and "T2 Chip initial time" is maximum 150ms. Adjust the reset
timings such that T4 is 12ms and T2 is 160ms to fit those figures.

This prevents sporadic touch controller start up failures when some
systems with at least ILI251x controller boot, without this patch
the systems sometimes fail to communicate with the touch controller.

Fixes: 201f3c803544c ("Input: ili210x - add reset GPIO support")
Signed-off-by: Marek Vasut 
Link: https://lore.kernel.org/r/20220518204901.93534-1-marex@denx.de
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov

Merge tag 'input-for-v5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2022-04-23T16:52:07+00:00

Pull input fixes from Dmitry Torokhov:

 - a new set of keycodes to be used by marine navigation systems

 - minor fixes to omap4-keypad and cypress-sf drivers

* tag 'input-for-v5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: add Marine Navigation Keycodes
  Input: omap4-keypad - fix pm_runtime_get_sync() error checking
  Input: cypress-sf - register a callback to disable the regulators

Input: omap4-keypad - fix pm_runtime_get_sync() error checking

2022-04-17T20:13:34+00:00

If the device is already in a runtime PM enabled state
pm_runtime_get_sync() will return 1, so a test for negative
value should be used to check for errors.

Fixes: f77621cc640a ("Input: omap-keypad - dynamically handle register offsets")
Signed-off-by: Miaoqian Lin 
Link: https://lore.kernel.org/r/20220412070131.19848-1-linmq006@gmail.com
Signed-off-by: Dmitry Torokhov

Input: cypress-sf - register a callback to disable the regulators

2022-04-09T02:34:46+00:00

When the driver fails to probe, we will get the following splat:

[   19.311970] ------------[ cut here ]------------
[   19.312566] WARNING: CPU: 3 PID: 375 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0
[   19.317591] RIP: 0010:_regulator_put+0x3ec/0x4e0
[   19.328831] Call Trace:
[   19.329112]  
[   19.329369]  regulator_bulk_free+0x82/0xe0
[   19.329860]  devres_release_group+0x319/0x3d0
[   19.330357]  i2c_device_probe+0x766/0x940

Fix this by adding a callback that will deal with the disabling when the
driver fails to probe.

Signed-off-by: Zheyu Ma 
Link: https://lore.kernel.org/r/20220409022629.3493557-1-zheyuma97@gmail.com
Signed-off-by: Dmitry Torokhov