linux-stable.git/drivers/input, branch v4.14.313 Linux kernel stable tree Input: focaltech - use explicitly signed char type 2023-04-05T09:14:20+00:00 Jason A. Donenfeld Jason@zx2c4.com 2023-03-20T04:36:36+00:00 6171c70c61c02c14b5851322a13b9d8d4a48e90c commit 8980f190947ba29f23110408e712444884b74251 upstream. The recent change of -funsigned-char causes additions of negative numbers to become additions of large positive numbers, leading to wrong calculations of mouse movement. Change these casts to be explicitly signed, to take into account negative offsets. Fixes: 3bc753c06dd0 ("kbuild: treat char as always unsigned") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=217211 Link: https://lore.kernel.org/r/20230318133010.1285202-1-Jason@zx2c4.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8980f190947ba29f23110408e712444884b74251 upstream.

The recent change of -funsigned-char causes additions of negative
numbers to become additions of large positive numbers, leading to wrong
calculations of mouse movement. Change these casts to be explicitly
signed, to take into account negative offsets.

Fixes: 3bc753c06dd0 ("kbuild: treat char as always unsigned")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217211
Link: https://lore.kernel.org/r/20230318133010.1285202-1-Jason@zx2c4.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: ads7846 - don't check penirq immediately for 7845 2023-03-11T15:26:40+00:00 Luca Ellero l.ellero@asem.it 2023-01-26T10:52:27+00:00 536fbb4f5357e93ac0faa62ee42e2c32d32255ae [ Upstream commit fa9f4275b20ec7b2a8fb05c66362d10b36f9efec ] To discard false readings, one should use "ti,penirq-recheck-delay-usecs". Checking get_pendown_state() at the beginning, most of the time fails causing malfunctioning. Fixes: ffa458c1bd9b ("spi: ads7846 driver") Signed-off-by: Luca Ellero <l.ellero@asem.it> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230126105227.47648-4-l.ellero@asem.it Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit fa9f4275b20ec7b2a8fb05c66362d10b36f9efec ]

To discard false readings, one should use "ti,penirq-recheck-delay-usecs".
Checking get_pendown_state() at the beginning, most of the time fails
causing malfunctioning.

Fixes: ffa458c1bd9b ("spi: ads7846 driver")
Signed-off-by: Luca Ellero <l.ellero@asem.it>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230126105227.47648-4-l.ellero@asem.it
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Input: ads7846 - don't report pressure for ads7845 2023-03-11T15:26:40+00:00 Luca Ellero l.ellero@asem.it 2023-01-26T10:52:25+00:00 ae1a6691b14ba71c0f31845baa7a8ec3716c2431 [ Upstream commit d50584d783313c8b05b84d0b07a2142f1bde46dd ] ADS7845 doesn't support pressure. Avoid the following error reported by libinput-list-devices: "ADS7845 Touchscreen: kernel bug: device has min == max on ABS_PRESSURE". Fixes: ffa458c1bd9b ("spi: ads7846 driver") Signed-off-by: Luca Ellero <l.ellero@asem.it> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230126105227.47648-2-l.ellero@asem.it Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit d50584d783313c8b05b84d0b07a2142f1bde46dd ]

ADS7845 doesn't support pressure.
Avoid the following error reported by libinput-list-devices:
"ADS7845 Touchscreen: kernel bug: device has min == max on ABS_PRESSURE".

Fixes: ffa458c1bd9b ("spi: ads7846 driver")
Signed-off-by: Luca Ellero <l.ellero@asem.it>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230126105227.47648-2-l.ellero@asem.it
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Revert "Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode" 2023-02-06T06:46:32+00:00 Dmitry Torokhov dmitry.torokhov@gmail.com 2022-12-16T21:15:34+00:00 e95a822ed1e52c96edb740ff291f13a3c5998407 commit 3c44e2b6cde674797b76e76d3a903a63ce8a18bb upstream. This reverts commit ac5408991ea6b06e29129b4d4861097c4c3e0d59 because it causes loss of keyboard on HP 15-da1xxx. Fixes: ac5408991ea6 ("Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode") Reported-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/824effa5-8b9a-c28a-82bb-9b0ab24623e1@kernel.org Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1206358 Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3c44e2b6cde674797b76e76d3a903a63ce8a18bb upstream.

This reverts commit ac5408991ea6b06e29129b4d4861097c4c3e0d59 because
it causes loss of keyboard on HP 15-da1xxx.

Fixes: ac5408991ea6 ("Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode")
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/824effa5-8b9a-c28a-82bb-9b0ab24623e1@kernel.org
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1206358
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: elants_i2c - properly handle the reset GPIO when power is off 2023-01-18T08:26:13+00:00 Douglas Anderson dianders@chromium.org 2022-11-18T05:49:19+00:00 785097c5bf558f73138379484b5e4fe149a8d9bc [ Upstream commit a85fbd6498441694475716a4d5c65f9d3e073faf ] As can be seen in elants_i2c_power_off(), we want the reset GPIO asserted when power is off. The reset GPIO is active low so we need the reset line logic low when power is off to avoid leakage. We have a problem, though, at probe time. At probe time we haven't powered the regulators on yet but we have: devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_LOW); While that _looks_ right, it turns out that it's not. The GPIOD_OUT_LOW doesn't mean to init the GPIO to low. It means init the GPIO to "not asserted". Since this is an active low GPIO that inits it to be high. Let's fix this to properly init the GPIO. Now after both probe and power off the state of the GPIO is consistent (it's "asserted" or level low). Once we fix this, we can see that at power on time we no longer to assert the reset GPIO as the first thing. The reset GPIO is _always_ asserted before powering on. Let's fix powering on to account for this. Fixes: afe10358e47a ("Input: elants_i2c - wire up regulator support") Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20221117123805.1.I9959ac561dd6e1e8e1ce7085e4de6167b27c574f@changeid Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit a85fbd6498441694475716a4d5c65f9d3e073faf ]

As can be seen in elants_i2c_power_off(), we want the reset GPIO
asserted when power is off. The reset GPIO is active low so we need
the reset line logic low when power is off to avoid leakage.

We have a problem, though, at probe time. At probe time we haven't
powered the regulators on yet but we have:

  devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_LOW);

While that _looks_ right, it turns out that it's not. The
GPIOD_OUT_LOW doesn't mean to init the GPIO to low. It means init the
GPIO to "not asserted". Since this is an active low GPIO that inits it
to be high.

Let's fix this to properly init the GPIO. Now after both probe and
power off the state of the GPIO is consistent (it's "asserted" or
level low).

Once we fix this, we can see that at power on time we no longer to
assert the reset GPIO as the first thing. The reset GPIO is _always_
asserted before powering on. Let's fix powering on to account for
this.

Fixes: afe10358e47a ("Input: elants_i2c - wire up regulator support")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20221117123805.1.I9959ac561dd6e1e8e1ce7085e4de6167b27c574f@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode 2022-12-08T10:16:31+00:00 Aman Dhoot amandhoot12@gmail.com 2022-10-16T03:41:17+00:00 b81b2a8222c0c33abb6a8f2bf1612e2802a2f8a0 [ Upstream commit ac5408991ea6b06e29129b4d4861097c4c3e0d59 ] The device works fine in native RMI mode, there is no reason to use legacy PS/2 mode with it. Signed-off-by: Aman Dhoot <amandhoot12@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ac5408991ea6b06e29129b4d4861097c4c3e0d59 ]

The device works fine in native RMI mode, there is no reason to use legacy
PS/2 mode with it.

Signed-off-by: Aman Dhoot <amandhoot12@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Input: xpad - fix wireless 360 controller breaking after suspend 2022-10-26T11:16:54+00:00 Cameron Gutman aicommander@gmail.com 2022-08-18T15:44:09+00:00 13808875a2642a22828996df2508d021c5dc9bf6 commit a17b9841152e7f4621619902b347e2cc39c32996 upstream. Suspending and resuming the system can sometimes cause the out URB to get hung after a reset_resume. This causes LED setting and force feedback to break on resume. To avoid this, just drop the reset_resume callback so the USB core rebinds xpad to the wireless pads on resume if a reset happened. A nice side effect of this change is the LED ring on wireless controllers is now set correctly on system resume. Cc: stable@vger.kernel.org Fixes: 4220f7db1e42 ("Input: xpad - workaround dead irq_out after suspend/ resume") Signed-off-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Link: https://lore.kernel.org/r/20220818154411.510308-3-rojtberg@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a17b9841152e7f4621619902b347e2cc39c32996 upstream.

Suspending and resuming the system can sometimes cause the out
URB to get hung after a reset_resume. This causes LED setting
and force feedback to break on resume. To avoid this, just drop
the reset_resume callback so the USB core rebinds xpad to the
wireless pads on resume if a reset happened.

A nice side effect of this change is the LED ring on wireless
controllers is now set correctly on system resume.

Cc: stable@vger.kernel.org
Fixes: 4220f7db1e42 ("Input: xpad - workaround dead irq_out after suspend/ resume")
Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Link: https://lore.kernel.org/r/20220818154411.510308-3-rojtberg@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: xpad - add supported devices as contributed on github 2022-10-26T11:16:54+00:00 Pavel Rojtberg rojtberg@gmail.com 2022-08-18T15:44:08+00:00 57d6b62f131b2e927633d79df61159329a5ae698 commit b382c5e37344883dc97525d05f1f6b788f549985 upstream. This is based on multiple commits at https://github.com/paroj/xpad Cc: stable@vger.kernel.org Signed-off-by: Jasper Poppe <jgpoppe@gmail.com> Signed-off-by: Jeremy Palmer <jpalmer@linz.govt.nz> Signed-off-by: Ruineka <ruinairas1992@gmail.com> Signed-off-by: Cleber de Mattos Casali <clebercasali@gmail.com> Signed-off-by: Kyle Gospodnetich <me@kylegospodneti.ch> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Link: https://lore.kernel.org/r/20220818154411.510308-2-rojtberg@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b382c5e37344883dc97525d05f1f6b788f549985 upstream.

This is based on multiple commits at https://github.com/paroj/xpad

Cc: stable@vger.kernel.org
Signed-off-by: Jasper Poppe <jgpoppe@gmail.com>
Signed-off-by: Jeremy Palmer <jpalmer@linz.govt.nz>
Signed-off-by: Ruineka <ruinairas1992@gmail.com>
Signed-off-by: Cleber de Mattos Casali <clebercasali@gmail.com>
Signed-off-by: Kyle Gospodnetich <me@kylegospodneti.ch>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Link: https://lore.kernel.org/r/20220818154411.510308-2-rojtberg@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: melfas_mip4 - fix return value check in mip4_probe() 2022-10-26T11:16:50+00:00 Yang Yingliang yangyingliang@huawei.com 2022-09-24T03:07:15+00:00 c7a356e64ea6320a6935b04079c7b4eaf07dad59 [ Upstream commit a54dc27bd25f20ee3ea2009584b3166d25178243 ] devm_gpiod_get_optional() may return ERR_PTR(-EPROBE_DEFER), add a minus sign to fix it. Fixes: 6ccb1d8f78bd ("Input: add MELFAS MIP4 Touchscreen driver") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220924030715.1653538-1-yangyingliang@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit a54dc27bd25f20ee3ea2009584b3166d25178243 ]

devm_gpiod_get_optional() may return ERR_PTR(-EPROBE_DEFER),
add a minus sign to fix it.

Fixes: 6ccb1d8f78bd ("Input: add MELFAS MIP4 Touchscreen driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220924030715.1653538-1-yangyingliang@huawei.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Input: rk805-pwrkey - fix module autoloading 2022-09-15T10:23:50+00:00 Peter Robinson pbrobinson@gmail.com 2022-08-22T23:33:18+00:00 40d8aaa4b9e8dd7ad4bcf245ad419258010b6ea3 [ Upstream commit 99077ad668ddd9b4823cc8ce3f3c7a3fc56f6fd9 ] Add the module alias so the rk805-pwrkey driver will autoload when built as a module. Fixes: 5a35b85c2d92 ("Input: add power key driver for Rockchip RK805 PMIC") Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/r/20220612225437.3628788-1-pbrobinson@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 99077ad668ddd9b4823cc8ce3f3c7a3fc56f6fd9 ]

Add the module alias so the rk805-pwrkey driver will
autoload when built as a module.

Fixes: 5a35b85c2d92 ("Input: add power key driver for Rockchip RK805 PMIC")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20220612225437.3628788-1-pbrobinson@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>