linux-stable.git/drivers/input, branch v3.4.110

Input: elantech - fix detection of touchpads where the revision matches a known rate

2015-09-18T01:20:44+00:00

commit 5f0ee9d17aae628b22be86966471db65be21f262 upstream.

Make the check to skip the rate check more lax, so that it applies
to all hw_version 4 models.

This fixes the touchpad not being detected properly on Asus PU551LA
laptops.

Reported-and-tested-by: David Zafra Gómez 
Signed-off-by: Hans de Goede 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Zefan Li

Input: elantech - fix semi-mt protocol for v3 HW

2015-09-18T01:20:41+00:00

commit 3c0213d17a09601e0c6c0ae0e27caf70d988290f upstream.

When the v3 hardware sees more than one finger, it uses the semi-mt
protocol to report the touches. However, it currently works when
num_fingers is 0, 1 or 2, but when it is 3 and above, it sends only 1
finger as if num_fingers was 1.

This confuses userspace which knows how to deal with extra fingers
when all the slots are used, but not when some are missing.

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=90101

Signed-off-by: Benjamin Tissoires 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Zefan Li

Input: elantech - fix absolute mode setting on some ASUS laptops

2015-09-18T01:20:27+00:00

commit bd884149aca61de269fd9bad83fe2a4232ffab21 upstream.

On ASUS TP500LN and X750JN, the touchpad absolute mode is reset each
time set_rate is done.

In order to fix this, we will verify the firmware version, and if it
matches the one in those laptops, the set_rate function is overloaded
with a function elantech_set_rate_restore_reg_07 that performs the
set_rate with the original function, followed by a restore of reg_07
(the register that sets the absolute mode on elantech v4 hardware).

Also the ASUS TP500LN and X750JN firmware version, capabilities, and
button constellation is added to elantech.c

Reported-and-tested-by: George Moutsopoulos 
Signed-off-by: Ulrik De Bie 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Zefan Li

Input: synaptics - handle spurious release of trackstick buttons

2015-06-19T03:40:26+00:00

commit ebc80840b850db72f7ae84fbcf77630ae5409629 upstream.

The Fimware 8.1 has a bug in which the extra buttons are only sent when the
ExtBit is 1.  This should be fixed in a future FW update which should have
a bump of the minor version.

Signed-off-by: Benjamin Tissoires 
Acked-by: Hans de Goede 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Zefan Li

Input: synaptics - fix middle button on Lenovo 2015 products

2015-06-19T03:40:26+00:00

commit dc5465dc8a6d5cae8a0e1d8826bdcb2e4cb261ab upstream.

On the X1 Carbon 3rd gen (with a 2015 broadwell cpu), the physical middle
button of the trackstick (attached to the touchpad serio device, of course)
seems to get lost.

Actually, the touchpads reports 3 extra buttons, which falls in the switch
below to the '2' case. Let's handle the case of odd numbers also, so that
the middle button finds its way back.

Signed-off-by: Benjamin Tissoires 
Acked-by: Hans de Goede 
Signed-off-by: Dmitry Torokhov 
[lizf: Backported to 3.4: open-code GENMASK]
Signed-off-by: Zefan Li

Input: synaptics - query min dimensions for fw v8.1

2015-06-19T03:40:26+00:00

commit ac097930f0730a9b777737de2b51e0fc49d2be7a upstream.

Query the min dimensions even if the check
SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 7 fails, but we know that the
firmware version 8.1 is safe.

With that we don't need quirks for post-2013 models anymore as they expose
correct min and max dimensions.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=91541

Signed-off-by: Daniel Martin 
  re-order the tests to check SYN_CAP_MIN_DIMENSIONS even on FW 8.1
Signed-off-by: Benjamin Tissoires 
Acked-by: Hans de Goede 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Zefan Li

Input: I8042 - add Acer Aspire 7738 to the nomux list

2015-04-14T09:33:51+00:00

commit 9333caeaeae4f831054e0e127a6ed3948b604d3e upstream.

When KBC is in active multiplexing mode the touchpad on this laptop does
not work.

Reported-by: Bilal Koc 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Zefan Li

Input: i8042 - reset keyboard to fix Elantech touchpad detection

2015-04-14T09:33:51+00:00

commit 148e9a711e034e06310a8c36b64957934ebe30f2 upstream.

On some laptops, keyboard needs to be reset in order to successfully detect
touchpad (e.g., some Gigabyte laptop models with Elantech touchpads).
Without resettin keyboard touchpad pretends to be completely dead.

Based on the original patch by Mateusz Jończyk this version has been
expanded to include DMI based detection & application of the fix
automatically on the affected models of laptops. This has been confirmed to
fix problem by three users already on three different models of laptops.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=81331
Signed-off-by: Srihari Vijayaraghavan 
Acked-by: Mateusz Jończyk 
Tested-by: Srihari Vijayaraghavan 
Tested by: Zakariya Dehlawi 
Tested-by: Guillaum Bouchard 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Zefan Li

Input: xpad - use proper endpoint type

2015-04-14T09:33:38+00:00

commit a1f9a4072655843fc03186acbad65990cc05dd2d upstream.

The xpad wireless endpoint is not a bulk endpoint on my devices, but
rather an interrupt one, so the USB core complains when it is submitted.
I'm guessing that the author really did mean that this should be an
interrupt urb, but as there are a zillion different xpad devices out
there, let's cover out bases and handle both bulk and interrupt
endpoints just as easily.

Signed-off-by: "Pierre-Loup A. Griffais" 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Zefan Li

Input: alps - allow up to 2 invalid packets without resetting device

2015-02-02T09:05:19+00:00

commit 9d720b34c0a432639252f63012e18b0507f5b432 upstream.

On some Dell Latitude laptops ALPS device or Dell EC send one invalid byte
in 6 bytes ALPS packet. In this case psmouse driver enter out of sync
state. It looks like that all other bytes in packets are valid and also
device working properly. So there is no need to do full device reset, just
need to wait for byte which match condition for first byte (start of
packet). Because ALPS packets are bigger (6 or 8 bytes) default limit is
small.

This patch increase number of invalid bytes to size of 2 ALPS packets which
psmouse driver can drop before do full reset.

Resetting ALPS devices take some time and when doing reset on some Dell
laptops touchpad, trackstick and also keyboard do not respond. So it is
better to do it only if really necessary.

Signed-off-by: Pali Rohár 
Tested-by: Pali Rohár 
Reviewed-by: Hans de Goede 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Zefan Li