linux-stable.git/drivers/input, branch v3.18.44

Input: tegra-kbc - fix inverted reset logic

2016-09-01T02:05:44+00:00

[ Upstream commit fae16989be77b09bab86c79233e4b511ea769cea ]

Commit fe6b0dfaba68 ("Input: tegra-kbc - use reset framework")
accidentally converted _deassert to _assert, so there is no code
to wake up this hardware.

Fixes: fe6b0dfaba68 ("Input: tegra-kbc - use reset framework")
Signed-off-by: Masahiro Yamada 
Acked-by: Thierry Reding 
Acked-by: Laxman Dewangan 
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: i8042 - set up shared ps2_cmd_mutex for AUX ports

2016-09-01T02:05:44+00:00

[ Upstream commit 47af45d684b5f3ae000ad448db02ce4f13f73273 ]

The commit 4097461897df ("Input: i8042 - break load dependency ...")
correctly set up ps2_cmd_mutex pointer for the KBD port but forgot to do
the same for AUX port(s), which results in communication on KBD and AUX
ports to clash with each other.

Fixes: 4097461897df ("Input: i8042 - break load dependency ...")
Reported-by: Bruno Wolff III 
Tested-by: Bruno Wolff III 
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: i8042 - break load dependency between atkbd/psmouse and i8042

2016-08-22T16:23:19+00:00

[ Upstream commit 4097461897df91041382ff6fcd2bfa7ee6b2448c ]

As explained in 1407814240-4275-1-git-send-email-decui@microsoft.com we
have a hard load dependency between i8042 and atkbd which prevents
keyboard from working on Gen2 Hyper-V VMs.

> hyperv_keyboard invokes serio_interrupt(), which needs a valid serio
> driver like atkbd.c.  atkbd.c depends on libps2.c because it invokes
> ps2_command().  libps2.c depends on i8042.c because it invokes
> i8042_check_port_owner().  As a result, hyperv_keyboard actually
> depends on i8042.c.
>
> For a Generation 2 Hyper-V VM (meaning no i8042 device emulated), if a
> Linux VM (like Arch Linux) happens to configure CONFIG_SERIO_I8042=m
> rather than =y, atkbd.ko can't load because i8042.ko can't load(due to
> no i8042 device emulated) and finally hyperv_keyboard can't work and
> the user can't input: https://bugs.archlinux.org/task/39820
> (Ubuntu/RHEL/SUSE aren't affected since they use CONFIG_SERIO_I8042=y)

To break the dependency we move away from using i8042_check_port_owner()
and instead allow serio port owner specify a mutex that clients should use
to serialize PS/2 command stream.

Reported-by: Mark Laws 
Tested-by: Mark Laws 
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: xpad - validate USB endpoint count during probe

2016-08-08T01:44:38+00:00

[ Upstream commit caca925fca4fb30c67be88cacbe908eec6721e43 ]

This prevents a malicious USB device from causing an oops.

Signed-off-by: Cameron Gutman 
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: zforce_ts - fix dual touch recognition

2016-07-12T12:48:03+00:00

[ Upstream commit 6984ab1ab35f422292b7781c65284038bcc0f6a6 ]

A wrong decoding of the touch coordinate message causes a wrong touch
ID. Touch ID for dual touch must be 0 or 1.

According to the actual Neonode nine byte touch coordinate coding,
the state is transported in the lower nibble and the touch ID in
the higher nibble of payload byte five.

Signed-off-by: Knut Wohlrab 
Signed-off-by: Oleksij Rempel 
Signed-off-by: Dirk Behme 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: pmic8xxx-pwrkey - fix algorithm for converting trigger delay

2016-07-12T12:47:46+00:00

[ Upstream commit eda5ecc0a6b865561997e177c393f0b0136fe3b7 ]

The trigger delay algorithm that converts from microseconds to
the register value looks incorrect. According to most of the PMIC
documentation, the equation is

	delay (Seconds) = (1 / 1024) * 2 ^ (x + 4)

except for one case where the documentation looks to have a
formatting issue and the equation looks like

	delay (Seconds) = (1 / 1024) * 2 x + 4

Most likely this driver was written with the improper
documentation to begin with. According to the downstream sources
the valid delays are from 2 seconds to 1/64 second, and the
latter equation just doesn't make sense for that. Let's fix the
algorithm and the range check to match the documentation and the
downstream sources.

Reported-by: Bjorn Andersson 
Fixes: 92d57a73e410 ("input: Add support for Qualcomm PMIC8XXX power key")
Signed-off-by: Stephen Boyd 
Tested-by: John Stultz 
Acked-by: Bjorn Andersson 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: elantech - add more IC body types to the list

2016-07-12T12:47:04+00:00

[ Upstream commit 226ba707744a51acb4244724e09caacb1d96aed9 ]

The touchpad in HP Pavilion 14-ab057ca reports it's version as 12 and
according to Elan both 11 and 12 are valid IC types and should be
identified as hw_version 4.

Reported-by: Patrick Lessard 
Tested-by: Patrick Lessard 
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: elantech - add new icbody type

2016-07-12T12:47:04+00:00

[ Upstream commit 692dd1916436164e228608803dfb6cb768d6355a ]

This adds new icbody type to the list recognized by Elantech PS/2 driver.

Cc: stable@vger.kernel.org
Signed-off-by: Sam Hung 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: wacom_w8001 - w8001_MAX_LENGTH should be 13

2016-07-12T12:47:03+00:00

[ Upstream commit 12afb34400eb2b301f06b2aa3535497d14faee59 ]

Somehow the patch that added two-finger touch support forgot to update
W8001_MAX_LENGTH from 11 to 13.

Signed-off-by: Ping Cheng 
Reviewed-by: Peter Hutterer 
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: uinput - handle compat ioctl for UI_SET_PHYS

2016-06-06T23:11:09+00:00

[ Upstream commit affa80bd97f7ca282d1faa91667b3ee9e4c590e6 ]

When running a 32-bit userspace on a 64-bit kernel, the UI_SET_PHYS
ioctl needs to be treated with special care, as it has the pointer
size encoded in the command.

Signed-off-by: Ricky Liang 
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin