linux-stable.git/drivers/input, branch v3.18.37

Input: zforce_ts - fix dual touch recognition

2016-07-12T12:48:03+00:00

[ Upstream commit 6984ab1ab35f422292b7781c65284038bcc0f6a6 ]

A wrong decoding of the touch coordinate message causes a wrong touch
ID. Touch ID for dual touch must be 0 or 1.

According to the actual Neonode nine byte touch coordinate coding,
the state is transported in the lower nibble and the touch ID in
the higher nibble of payload byte five.

Signed-off-by: Knut Wohlrab 
Signed-off-by: Oleksij Rempel 
Signed-off-by: Dirk Behme 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: pmic8xxx-pwrkey - fix algorithm for converting trigger delay

2016-07-12T12:47:46+00:00

[ Upstream commit eda5ecc0a6b865561997e177c393f0b0136fe3b7 ]

The trigger delay algorithm that converts from microseconds to
the register value looks incorrect. According to most of the PMIC
documentation, the equation is

	delay (Seconds) = (1 / 1024) * 2 ^ (x + 4)

except for one case where the documentation looks to have a
formatting issue and the equation looks like

	delay (Seconds) = (1 / 1024) * 2 x + 4

Most likely this driver was written with the improper
documentation to begin with. According to the downstream sources
the valid delays are from 2 seconds to 1/64 second, and the
latter equation just doesn't make sense for that. Let's fix the
algorithm and the range check to match the documentation and the
downstream sources.

Reported-by: Bjorn Andersson 
Fixes: 92d57a73e410 ("input: Add support for Qualcomm PMIC8XXX power key")
Signed-off-by: Stephen Boyd 
Tested-by: John Stultz 
Acked-by: Bjorn Andersson 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: elantech - add more IC body types to the list

2016-07-12T12:47:04+00:00

[ Upstream commit 226ba707744a51acb4244724e09caacb1d96aed9 ]

The touchpad in HP Pavilion 14-ab057ca reports it's version as 12 and
according to Elan both 11 and 12 are valid IC types and should be
identified as hw_version 4.

Reported-by: Patrick Lessard 
Tested-by: Patrick Lessard 
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: elantech - add new icbody type

2016-07-12T12:47:04+00:00

[ Upstream commit 692dd1916436164e228608803dfb6cb768d6355a ]

This adds new icbody type to the list recognized by Elantech PS/2 driver.

Cc: stable@vger.kernel.org
Signed-off-by: Sam Hung 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: wacom_w8001 - w8001_MAX_LENGTH should be 13

2016-07-12T12:47:03+00:00

[ Upstream commit 12afb34400eb2b301f06b2aa3535497d14faee59 ]

Somehow the patch that added two-finger touch support forgot to update
W8001_MAX_LENGTH from 11 to 13.

Signed-off-by: Ping Cheng 
Reviewed-by: Peter Hutterer 
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: uinput - handle compat ioctl for UI_SET_PHYS

2016-06-06T23:11:09+00:00

[ Upstream commit affa80bd97f7ca282d1faa91667b3ee9e4c590e6 ]

When running a 32-bit userspace on a 64-bit kernel, the UI_SET_PHYS
ioctl needs to be treated with special care, as it has the pointer
size encoded in the command.

Signed-off-by: Ricky Liang 
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: max8997-haptic - fix NULL pointer dereference

2016-05-18T01:56:34+00:00

[ Upstream commit 6ae645d5fa385f3787bf1723639cd907fe5865e7 ]

NULL pointer derefence happens when booting with DTB because the
platform data for haptic device is not set in supplied data from parent
MFD device.

The MFD device creates only platform data (from Device Tree) for itself,
not for haptic child.

Unable to handle kernel NULL pointer dereference at virtual address 0000009c
pgd = c0004000
	[0000009c] *pgd=00000000
	Internal error: Oops: 5 [#1] PREEMPT SMP ARM
	(max8997_haptic_probe) from [] (platform_drv_probe+0x4c/0xb0)
	(platform_drv_probe) from [] (driver_probe_device+0x214/0x2c0)
	(driver_probe_device) from [] (__driver_attach+0xac/0xb0)
	(__driver_attach) from [] (bus_for_each_dev+0x68/0x9c)
	(bus_for_each_dev) from [] (bus_add_driver+0x1a0/0x218)
	(bus_add_driver) from [] (driver_register+0x78/0xf8)
	(driver_register) from [] (do_one_initcall+0x90/0x1d8)
	(do_one_initcall) from [] (kernel_init_freeable+0x15c/0x1fc)
	(kernel_init_freeable) from [] (kernel_init+0x8/0x114)
	(kernel_init) from [] (ret_from_fork+0x14/0x3c)

Signed-off-by: Marek Szyprowski 
Cc: 
Fixes: 104594b01ce7 ("Input: add driver support for MAX8997-haptic")
[k.kozlowski: Write commit message, add CC-stable]
Signed-off-by: Krzysztof Kozlowski 
Signed-off-by: Dmitry Torokhov 

Signed-off-by: Sasha Levin

Input: gtco - fix crash on detecting device without endpoints

2016-05-08T20:49:12+00:00

[ Upstream commit 162f98dea487206d9ab79fc12ed64700667a894d ]

The gtco driver expects at least one valid endpoint. If given malicious
descriptors that specify 0 for the number of endpoints, it will crash in
the probe function. Ensure there is at least one endpoint on the interface
before using it.

Also let's fix a minor coding style issue.

The full correct report of this issue can be found in the public
Red Hat Bugzilla:

https://bugzilla.redhat.com/show_bug.cgi?id=1283385

Reported-by: Ralf Spenneberg 
Signed-off-by: Vladis Dronov 
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: ati_remote2 - fix crashes on detecting device with invalid descriptor

2016-04-18T12:49:39+00:00

[ Upstream commit 950336ba3e4a1ffd2ca60d29f6ef386dd2c7351d ]

The ati_remote2 driver expects at least two interfaces with one
endpoint each. If given malicious descriptor that specify one
interface or no endpoints, it will crash in the probe function.
Ensure there is at least two interfaces and one endpoint for each
interface before using it.

The full disclosure: http://seclists.org/bugtraq/2016/Mar/90

Reported-by: Ralf Spenneberg 
Signed-off-by: Vladis Dronov 
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: synaptics - handle spurious release of trackstick buttons, again

2016-04-18T12:49:34+00:00

[ Upstream commit 82be788c96ed5978d3cb4a00079e26b981a3df3f ]

Looks like the fimware 8.2 still has the extra buttons spurious release
bug.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=114321
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin