linux-stable.git/drivers/input, branch linux-5.14.y Linux kernel stable tree Input: st1232 - increase "wait ready" timeout 2021-11-17T10:04:34+00:00 John Keeping john@metanate.com 2021-10-06T18:06:03+00:00 3189e1420b295fef39943806fcfb7579153910a8 [ Upstream commit 2667f6b7af99e81958fa97c03bb519fcb09d0055 ] I have a ST1633 touch controller which fails to probe due to a timeout waiting for the controller to become ready. Increasing the minimum delay to 100ms ensures that the probe sequence completes successfully. The ST1633 datasheet says nothing about the maximum delay here and the ST1232 I2C protocol document says "wait until" with no notion of a timeout. Since this only runs once during probe, being generous with the timout seems reasonable and most likely the device will become ready eventually. (It may be worth noting that I saw this issue with a PREEMPT_RT patched kernel which probably has tighter wakeups from usleep_range() than other preemption models.) Fixes: f605be6a57b4 ("Input: st1232 - wait until device is ready before reading resolution") Signed-off-by: John Keeping <john@metanate.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210929152609.2421483-1-john@metanate.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 2667f6b7af99e81958fa97c03bb519fcb09d0055 ]

I have a ST1633 touch controller which fails to probe due to a timeout
waiting for the controller to become ready.  Increasing the minimum
delay to 100ms ensures that the probe sequence completes successfully.

The ST1633 datasheet says nothing about the maximum delay here and the
ST1232 I2C protocol document says "wait until" with no notion of a
timeout.

Since this only runs once during probe, being generous with the timout
seems reasonable and most likely the device will become ready
eventually.

(It may be worth noting that I saw this issue with a PREEMPT_RT patched
kernel which probably has tighter wakeups from usleep_range() than other
preemption models.)

Fixes: f605be6a57b4 ("Input: st1232 - wait until device is ready before reading resolution")
Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210929152609.2421483-1-john@metanate.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Input: ariel-pwrbutton - add SPI device ID table 2021-11-17T10:04:32+00:00 Mark Brown broonie@kernel.org 2021-10-02T04:20:49+00:00 a58fb2098608efe143cfad94ffa02ff17fb2e4e4 [ Upstream commit 5c4c2c8e6fac26fa0b80c234d6e9f75d637193af ] Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding a SPI device ID table. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210927134104.38648-1-broonie@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 5c4c2c8e6fac26fa0b80c234d6e9f75d637193af ]

Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding a SPI device ID table.

Fixes: 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210927134104.38648-1-broonie@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Input: i8042 - Add quirk for Fujitsu Lifebook T725 2021-11-17T10:03:22+00:00 Takashi Iwai tiwai@suse.de 2021-11-03T07:00:19+00:00 7f94e05338f5d52eef23e6ee98d9b499cafb4ced commit 16e28abb7290c4ca3b3a0f333ba067f34bb18c86 upstream. Fujitsu Lifebook T725 laptop requires, like a few other similar models, the nomux and notimeout options to probe the touchpad properly. This patch adds the corresponding quirk entries. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1191980 Tested-by: Neal Gompa <ngompa13@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20211103070019.13374-1-tiwai@suse.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 16e28abb7290c4ca3b3a0f333ba067f34bb18c86 upstream.

Fujitsu Lifebook T725 laptop requires, like a few other similar
models, the nomux and notimeout options to probe the touchpad
properly.  This patch adds the corresponding quirk entries.

BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1191980
Tested-by: Neal Gompa <ngompa13@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20211103070019.13374-1-tiwai@suse.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: elantench - fix misreporting trackpoint coordinates 2021-11-17T10:03:22+00:00 Phoenix Huang phoenix@emc.com.tw 2021-11-08T06:00:03+00:00 94e0a6bc4130aad78840ceb427916c1be993d722 commit be896bd3b72b44126c55768f14c22a8729b0992e upstream. Some firmwares occasionally report bogus data from trackpoint, with X or Y displacement being too large (outside of [-127, 127] range). Let's drop such packets so that we do not generate jumps. Signed-off-by: Phoenix Huang <phoenix@emc.com.tw> Tested-by: Yufei Du <yufeidu@cs.unc.edu> Link: https://lore.kernel.org/r/20210729010940.5752-1-phoenix@emc.com.tw Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit be896bd3b72b44126c55768f14c22a8729b0992e upstream.

Some firmwares occasionally report bogus data from trackpoint, with X or Y
displacement being too large (outside of [-127, 127] range). Let's drop such
packets so that we do not generate jumps.

Signed-off-by: Phoenix Huang <phoenix@emc.com.tw>
Tested-by: Yufei Du <yufeidu@cs.unc.edu>
Link: https://lore.kernel.org/r/20210729010940.5752-1-phoenix@emc.com.tw
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: iforce - fix control-message timeout 2021-11-17T10:03:22+00:00 Johan Hovold johan@kernel.org 2021-11-10T06:58:01+00:00 f9ccab9a050dda2861438e90def9537f80f281a8 commit 744d0090a5f6dfa4c81b53402ccdf08313100429 upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 487358627825 ("Input: iforce - use DMA-safe buffer when getting IDs from USB") Signed-off-by: Johan Hovold <johan@kernel.org> Cc: stable@vger.kernel.org # 5.3 Link: https://lore.kernel.org/r/20211025115501.5190-1-johan@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 744d0090a5f6dfa4c81b53402ccdf08313100429 upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Fixes: 487358627825 ("Input: iforce - use DMA-safe buffer when getting IDs from USB")
Signed-off-by: Johan Hovold <johan@kernel.org>
Cc: stable@vger.kernel.org      # 5.3
Link: https://lore.kernel.org/r/20211025115501.5190-1-johan@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: snvs_pwrkey - add clk handling 2021-10-27T07:59:52+00:00 Uwe Kleine-König u.kleine-koenig@pengutronix.de 2021-10-16T04:19:33+00:00 9eb2aaede63292b99d63121ede2723e089c7c9f3 [ Upstream commit d997cc1715df7b6c3df798881fb9941acf0079f8 ] On i.MX7S and i.MX8M* (but not i.MX6*) the pwrkey device has an associated clock. Accessing the registers requires that this clock is enabled. Binding the driver on at least i.MX7S and i.MX8MP while not having the clock enabled results in a complete hang of the machine. (This usually only happens if snvs_pwrkey is built as a module and the rtc-snvs driver isn't already bound because at bootup the required clk is on and only gets disabled when the clk framework disables unused clks late during boot.) This completes the fix in commit 135be16d3505 ("ARM: dts: imx7s: add snvs clock to pwrkey"). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20211013062848.2667192-1-u.kleine-koenig@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit d997cc1715df7b6c3df798881fb9941acf0079f8 ]

On i.MX7S and i.MX8M* (but not i.MX6*) the pwrkey device has an
associated clock. Accessing the registers requires that this clock is
enabled. Binding the driver on at least i.MX7S and i.MX8MP while not
having the clock enabled results in a complete hang of the machine.
(This usually only happens if snvs_pwrkey is built as a module and the
rtc-snvs driver isn't already bound because at bootup the required clk
is on and only gets disabled when the clk framework disables unused clks
late during boot.)

This completes the fix in commit 135be16d3505 ("ARM: dts: imx7s: add
snvs clock to pwrkey").

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20211013062848.2667192-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Input: resistive-adc-touch - fix division by zero error on z1 == 0 2021-10-20T09:57:52+00:00 Oleksij Rempel o.rempel@pengutronix.de 2021-10-16T04:12:06+00:00 1a5ba478c41c4842e899a95458cb7c7a1228b5b9 commit fe0a7e3d012738b0034b3c97ddb0e8bc0a3ff0e6 upstream. For proper pressure calculation we need at least x and z1 to be non zero. Even worse, in case z1 we may run in to division by zero error. Fixes: 60b7db914ddd ("Input: resistive-adc-touch - rework mapping of channels") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20211007095727.29579-1-o.rempel@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit fe0a7e3d012738b0034b3c97ddb0e8bc0a3ff0e6 upstream.

For proper pressure calculation we need at least x and z1 to be non
zero. Even worse, in case z1 we may run in to division by zero
error.

Fixes: 60b7db914ddd ("Input: resistive-adc-touch - rework mapping of channels")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20211007095727.29579-1-o.rempel@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: xpad - add support for another USB ID of Nacon GC-100 2021-10-20T09:57:49+00:00 Michael Cullen michael@michaelcullen.name 2021-10-15T20:17:50+00:00 96703298fc519f3bbd88066f3f3c8096c539df8c commit 3378a07daa6cdd11e042797454c706d1c69f9ca6 upstream. The Nacon GX100XF is already mapped, but it seems there is a Nacon GC-100 (identified as NC5136Wht PCGC-100WHITE though I believe other colours exist) with a different USB ID when in XInput mode. Signed-off-by: Michael Cullen <michael@michaelcullen.name> Link: https://lore.kernel.org/r/20211015192051.5196-1-michael@michaelcullen.name Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3378a07daa6cdd11e042797454c706d1c69f9ca6 upstream.

The Nacon GX100XF is already mapped, but it seems there is a Nacon
GC-100 (identified as NC5136Wht PCGC-100WHITE though I believe other
colours exist) with a different USB ID when in XInput mode.

Signed-off-by: Michael Cullen <michael@michaelcullen.name>
Link: https://lore.kernel.org/r/20211015192051.5196-1-michael@michaelcullen.name
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: elan_i2c - reduce the resume time for controller in Whitebox 2021-09-18T11:43:20+00:00 jingle.wu jingle.wu@emc.com.tw 2021-09-07T04:52:05+00:00 a9607572b0a2e1eec1a841d1a83fd7791c28ad2f commit d198b8273e3006818ea287a93eb4d8fd2543e512 upstream. Similar to controllers found Voxel, Delbin, Magpie and Bobba, the one found in Whitebox does not need to be reset after issuing power-on command, and skipping reset saves resume time. Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210907012924.11391-1-jingle.wu@emc.com.tw Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d198b8273e3006818ea287a93eb4d8fd2543e512 upstream.

Similar to controllers found Voxel, Delbin, Magpie and Bobba, the one found
in Whitebox does not need to be reset after issuing power-on command, and
skipping reset saves resume time.

Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210907012924.11391-1-jingle.wu@emc.com.tw
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'for-linus-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml 2021-07-09T17:19:13+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-07-09T17:19:13+00:00 dcf3c935dd9e8e76c9922e88672fa4ad6a8a4df8 Pull UML updates from Richard Weinberger: - Support for optimized routines based on the host CPU - Support for PCI via virtio - Various fixes * tag 'for-linus-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: remove unneeded semicolon in um_arch.c um: Remove the repeated declaration um: fix error return code in winch_tramp() um: fix error return code in slip_open() um: Fix stack pointer alignment um: implement flush_cache_vmap/flush_cache_vunmap um: add a UML specific futex implementation um: enable the use of optimized xor routines in UML um: Add support for host CPU flags and alignment um: allow not setting extra rpaths in the linux binary um: virtio/pci: enable suspend/resume um: add PCI over virtio emulation driver um: irqs: allow invoking time-travel handler multiple times um: time-travel/signals: fix ndelay() in interrupt um: expose time-travel mode to userspace side um: export signals_enabled directly um: remove unused smp_sigio_handler() declaration lib: add iomem emulation (logic_iomem) um: allow disabling NO_IOMEM 
Pull UML updates from Richard Weinberger:

 - Support for optimized routines based on the host CPU

 - Support for PCI via virtio

 - Various fixes

* tag 'for-linus-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: remove unneeded semicolon in um_arch.c
  um: Remove the repeated declaration
  um: fix error return code in winch_tramp()
  um: fix error return code in slip_open()
  um: Fix stack pointer alignment
  um: implement flush_cache_vmap/flush_cache_vunmap
  um: add a UML specific futex implementation
  um: enable the use of optimized xor routines in UML
  um: Add support for host CPU flags and alignment
  um: allow not setting extra rpaths in the linux binary
  um: virtio/pci: enable suspend/resume
  um: add PCI over virtio emulation driver
  um: irqs: allow invoking time-travel handler multiple times
  um: time-travel/signals: fix ndelay() in interrupt
  um: expose time-travel mode to userspace side
  um: export signals_enabled directly
  um: remove unused smp_sigio_handler() declaration
  lib: add iomem emulation (logic_iomem)
  um: allow disabling NO_IOMEM