linux-stable.git/drivers/input, branch linux-3.7.y Linux kernel stable tree Input: gpio_keys - defer probing if GPIO probing is deferred 2013-01-11T17:18:47+00:00 Dmitry Torokhov dmitry.torokhov@gmail.com 2012-12-24T17:32:46+00:00 dfcffbb7f048e69812ad92a293ea71a6514e4077 commit e324ce61ef483dd26d03502d35666ad48a2e1b33 upstream. If of_get_gpio_flags() returns an error (as in case when GPIO probe is deferred) the driver would attempt to claim invalid GPIO. It should propagate the error code up the stack instead so that the probe either fails or will be retried later (in case of -EPROBE_DEFER). Reported-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e324ce61ef483dd26d03502d35666ad48a2e1b33 upstream.

If of_get_gpio_flags() returns an error (as in case when GPIO probe is
deferred) the driver would attempt to claim invalid GPIO. It should
propagate the error code up the stack instead so that the probe either
fails or will be retried later (in case of -EPROBE_DEFER).

Reported-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: gpio_keys_polled - defer probing if GPIO probing is deferred 2013-01-11T17:18:46+00:00 Gabor Juhos juhosg@openwrt.org 2012-12-23T09:54:58+00:00 d9f5f4bc9a6ca2558588eee434027b0b2af2f121 commit d46329a708c1a3301e272a029266b69339c0877f upstream. If GPIO probing is deferred, the driver tries to claim an invalid GPIO line which leads to an error message like this: gpio-keys-polled buttons.2: unable to claim gpio 4294966779, err=-22 gpio-keys-polled: probe of buttons.2 failed with error -22 We should make sure that error code returned by of_get_gpio_flags (including -EPROBE_DEFER) is propagated up the stack. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d46329a708c1a3301e272a029266b69339c0877f upstream.

If GPIO probing is deferred, the driver tries to claim an invalid GPIO line
which leads to an error message like this:

  gpio-keys-polled buttons.2: unable to claim gpio 4294966779, err=-22
  gpio-keys-polled: probe of buttons.2 failed with error -22

We should make sure that error code returned by of_get_gpio_flags (including
-EPROBE_DEFER) is propagated up the stack.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: sentelic - only report position of first finger as ST coordinates 2013-01-11T17:18:39+00:00 Christophe TORDEUX christophe@tordeux.net 2012-12-24T17:20:40+00:00 459825b716b4f7f71d3d0a0da9c7e4192eb371c6 commit a25461659050b913e114d282bf58823682eb56b6 upstream. Report only the position of the first finger as absolute non-MT coordinates, instead of reporting both fingers alternatively. Actual MT events are unaffected. This fixes horizontal and improves vertical scrolling with the touchpad. Signed-off-by: Christophe TORDEUX <christophe@tordeux.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a25461659050b913e114d282bf58823682eb56b6 upstream.

Report only the position of the first finger as absolute non-MT coordinates,
instead of reporting both fingers alternatively. Actual MT events are
unaffected.

This fixes horizontal and improves vertical scrolling with the touchpad.

Signed-off-by: Christophe TORDEUX <christophe@tordeux.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: wacom - fix touch support for Bamboo Fun CTH-461 2013-01-11T17:18:39+00:00 Diego Calleja diegocg@gmail.com 2012-12-04T05:16:11+00:00 2bf3364673ef36af85003ead8247313f78df515a commit e12b3cecf221644ccab64d7c30a6df58b7630cb0 upstream. Commit f393ee2b814e3291c12565000210b3cf10aa5c1d forgot to add the touch_max property for Wacom Bamboo Fun CTH-461/S, ID 056a:00d2. This broke the touch functionality for that device. This patch, (done with help of Ping Cheng), adds the correct value and makes touch work again. Signed-off-by: Diego Calleja <diegocg@gmail.com> Reviewed-by: Ping Cheng <pinglinux@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e12b3cecf221644ccab64d7c30a6df58b7630cb0 upstream.

Commit f393ee2b814e3291c12565000210b3cf10aa5c1d forgot to add the
touch_max property for Wacom Bamboo Fun CTH-461/S, ID 056a:00d2.

This broke the touch functionality for that device. This patch,
(done with help of Ping Cheng), adds the correct value and makes
touch work again.

Signed-off-by: Diego Calleja <diegocg@gmail.com>
Reviewed-by: Ping Cheng <pinglinux@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: walkera0701 - fix crash on startup 2013-01-11T17:18:39+00:00 Peter Popovec popovec@oko.fei.tuke.sk 2012-12-15T06:57:25+00:00 df433c41eb955760b92949c2d7a229ace30789db commit a455e2985f57e2a71566bb8850094af38b2c932d upstream. The driver's timer must be set up before enabling IRQ handler, otherwise bad things may happen. Reported-and-tested-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Peter Popovec <popovec@fei.tuke.sk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a455e2985f57e2a71566bb8850094af38b2c932d upstream.

The driver's timer must be set up before enabling IRQ handler, otherwise
bad things may happen.

Reported-and-tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Peter Popovec <popovec@fei.tuke.sk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
x86, 8042: Enable A20 using KBC to fix S3 resume on some MSI laptops 2013-01-11T17:18:17+00:00 Ondrej Zary linux@rainbow-software.org 2012-12-11T21:18:05+00:00 2dfc7a391af637b6a820c0ded3964c2b9efd417f commit ad68652412276f68ad4fe3e1ecf5ee6880876783 upstream. Some MSI laptop BIOSes are broken - INT 15h code uses port 92h to enable A20 line but resume code assumes that KBC was used. The laptop will not resume from S3 otherwise but powers off after a while and then powers on again stuck with a blank screen. Fix it by enabling A20 using KBC in i8042_platform_init for x86. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=12878 Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Rafael J. Wysocki <rjw@sisk.pl> Link: http://lkml.kernel.org/r/201212112218.06551.linux@rainbow-software.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ad68652412276f68ad4fe3e1ecf5ee6880876783 upstream.

Some MSI laptop BIOSes are broken - INT 15h code uses port 92h to enable A20
line but resume code assumes that KBC was used.
The laptop will not resume from S3 otherwise but powers off after a while
and then powers on again stuck with a blank screen.

Fix it by enabling A20 using KBC in i8042_platform_init for x86.

Fixes https://bugzilla.kernel.org/show_bug.cgi?id=12878

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Link: http://lkml.kernel.org/r/201212112218.06551.linux@rainbow-software.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: matrix-keymap - provide proper module license 2012-12-11T00:10:05+00:00 Florian Fainelli florian@openwrt.org 2012-12-10T20:25:32+00:00 55220bb3e5f917dd5fee1153c612f9a83599f639 The matrix-keymap module is currently lacking a proper module license, add one so we don't have this module tainting the entire kernel. This issue has been present since commit 1932811f426f ("Input: matrix-keymap - uninline and prepare for device tree support") Signed-off-by: Florian Fainelli <florian@openwrt.org> CC: stable@vger.kernel.org # v3.5+ Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
The matrix-keymap module is currently lacking a proper module license,
add one so we don't have this module tainting the entire kernel.  This
issue has been present since commit 1932811f426f ("Input: matrix-keymap
- uninline and prepare for device tree support")

Signed-off-by: Florian Fainelli <florian@openwrt.org>
CC: stable@vger.kernel.org # v3.5+
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input 2012-11-23T07:45:34+00:00 Linus Torvalds torvalds@linux-foundation.org 2012-11-23T07:45:34+00:00 26d29d06ea020411559f75ec908db235ca1838d9 Pull input updates from Dmitry Torokhov: "This fixes recent regression where /dev/input/mice got assigned wrong device node which messed up setups with static /dev, and a regression in ads7846 GPIO debounce setup." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: ARM - OMAP: ads7846: fix pendown debounce setting Input: ads7846 - enable pendown GPIO debounce time setting Input: mousedev - move /dev/input/mice to the correct minor Input: MT - document new 'flags' argument of input_mt_init_slots() 
Pull input updates from Dmitry Torokhov:
 "This fixes recent regression where /dev/input/mice got assigned wrong
  device node which messed up setups with static /dev, and a regression
  in ads7846 GPIO debounce setup."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  ARM - OMAP: ads7846: fix pendown debounce setting
  Input: ads7846 - enable pendown GPIO debounce time setting
  Input: mousedev - move /dev/input/mice to the correct minor
  Input: MT - document new 'flags' argument of input_mt_init_slots()
Input: ads7846 - enable pendown GPIO debounce time setting 2012-11-21T21:09:56+00:00 Igor Grinberg grinberg@compulab.co.il 2012-11-21T07:00:10+00:00 c4f4925439f13a243aecfb36c693613603c0bfbd Some platforms need the pendown GPIO debounce time setting programmed. Since the pendown GPIO is handled by the driver, the debounce time should also be handled along with the pendown GPIO request. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
Some platforms need the pendown GPIO debounce time setting programmed.
Since the pendown GPIO is handled by the driver, the debounce time
should also be handled along with the pendown GPIO request.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: mousedev - move /dev/input/mice to the correct minor 2012-11-19T07:15:16+00:00 Dmitry Torokhov dmitry.torokhov@gmail.com 2012-11-16T17:14:12+00:00 c91cb7a75eaf65358aac5ea2b512ac60a9437ff4 When doing conversion to dynamic input numbers I inadvertently moved /dev/input/mice from c,13,63 to c,13,31. We need to fix this so that setups with statically populated /dev continue working. Tested-by: Krzysztof Mazur <krzysiek@podlesie.net> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
When doing conversion to dynamic input numbers I inadvertently moved
/dev/input/mice from c,13,63 to c,13,31. We need to fix this so that
setups with statically populated /dev continue working.

Tested-by: Krzysztof Mazur <krzysiek@podlesie.net>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>