[ Upstream commit c7e37cc6240767f794678d11704935d49cc81d59 ] On ACPI systems (irq_pin_access_method == IRQ_PIN_ACCESS_ACPI_*) the driver does not reset the controller at probe time, because sometimes the system firmware loads a config and resetting might loose this config. On the Nanote UMPC-01 device OTOH the config is in flash of the controller, the controller needs a reset to load this; and the system firmware does not reset the controller on a cold boot. To fix the Nanote UMPC-01 touchscreen not working on a cold boot, try resetting the controller and then re-reading the config when encountering a config with 0 width/height/max_touch_num value and the controller has not already been reset by goodix_ts_probe(). This should be safe to do in general because normally we should never encounter a config with 0 width/height/max_touch_num. Doing this in general not only avoids the need for a DMI quirk, but also might help other systems. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Bastien Nocera <hadess@hadess.net> Link: https://lore.kernel.org/r/20221025122930.421377-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Pull input fixes from Dmitry Torokhov: - small fixes for iqs62x-keys and melfas_mip4 drivers - corrected register address in snvs_pwrkey driver - Synaptic driver will stop trying to use intertouch (native) mode on some Lenovo AMD devices * tag 'input-for-v6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: snvs_pwrkey - fix SNVS_HPVIDR1 register address Input: synaptics - disable Intertouch for Lenovo T14 and P14s AMD G1 Input: iqs62x-keys - drop unused device node references Input: melfas_mip4 - fix return value check in mip4_probe()
devm_gpiod_get_optional() may return ERR_PTR(-EPROBE_DEFER),
add a minus sign to fix it.
Fixes: 6ccb1d8f78bd ("Input: add MELFAS MIP4 Touchscreen driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220924030715.1653538-1-yangyingliang@huawei.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull input fixes from Dmitry Torokhov: - GT1158 ID added to Goodix touchscreen driver - Boeder Force Feedback Wheel USB added to iforce joystick driver - fixup for iforce driver to avoid hangups - fix autoloading of rk805-pwrkey driver. * tag 'input-for-v6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: iforce - add support for Boeder Force Feedback Wheel Input: iforce - wake up after clearing IFORCE_XMIT_RUNNING flag Input: goodix - add compatible string for GT1158 MAINTAINERS: add include/dt-bindings/input to INPUT DRIVERS Input: rk805-pwrkey - fix module autoloading Input: goodix - add support for GT1158 dt-bindings: input: touchscreen: add compatible string for Goodix GT1158
Add compatible string for GT1158 missing from the previous patch.
Fixes: 425fe4709c76 ("Input: goodix - add support for GT1158")
Signed-off-by: Jarrah Gosbell <kernel@undef.tools>
Link: https://lore.kernel.org/r/20220813043821.9981-1-kernel@undef.tools
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This controller is used by PinePhone and PinePhone Pro. Support for the PinePhone Pro will be added in a later patch set. Signed-off-by: Ondrej Jirman <megi@xff.cz> Signed-off-by: Jarrah Gosbell <kernel@undef.tools> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220809091200.290492-1-kernel@undef.tools Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull input updates from Dmitry Torokhov: - changes to input core to properly queue synthetic events (such as autorepeat) and to release multitouch contacts when an input device is inhibited or suspended - reworked quirk handling in i8042 driver that consolidates multiple DMI tables into one and adds several quirks for TUXEDO line of laptops - update to mt6779 keypad to better reflect organization of the hardware - changes to mtk-pmic-keys driver preparing it to handle more variants - facelift of adp5588-keys driver - improvements to iqs7222 driver - adjustments to various DT binding documents for input devices - other assorted driver fixes. * tag 'input-for-v5.20-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (54 commits) Input: adc-joystick - fix ordering in adc_joystick_probe() dt-bindings: input: ariel-pwrbutton: use spi-peripheral-props.yaml Input: deactivate MT slots when inhibiting or suspending devices Input: properly queue synthetic events dt-bindings: input: iqs7222: Use central 'linux,code' definition Input: i8042 - add dritek quirk for Acer Aspire One AO532 dt-bindings: input: gpio-keys: accept also interrupt-extended dt-bindings: input: gpio-keys: reference input.yaml and document properties dt-bindings: input: gpio-keys: enforce node names to match all properties dt-bindings: input: Convert adc-keys to DT schema dt-bindings: input: Centralize 'linux,input-type' definition dt-bindings: input: Use common 'linux,keycodes' definition dt-bindings: input: Centralize 'linux,code' definition dt-bindings: input: Increase maximum keycode value to 0x2ff Input: mt6779-keypad - implement row/column selection Input: mt6779-keypad - match hardware matrix organization Input: i8042 - add additional TUXEDO devices to i8042 quirk tables Input: goodix - switch use of acpi_gpio_get_*_resource() APIs Input: i8042 - add TUXEDO devices to i8042 quirk tables Input: i8042 - add debug output for quirks ...
Pull SPDX updates from Greg KH: "Here is the set of SPDX comment updates for 6.0-rc1. Nothing huge here, just a number of updated SPDX license tags and cleanups based on the review of a number of common patterns in GPLv2 boilerplate text. Also included in here are a few other minor updates, two USB files, and one Documentation file update to get the SPDX lines correct. All of these have been in the linux-next tree for a very long time" * tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits) Documentation: samsung-s3c24xx: Add blank line after SPDX directive x86/crypto: Remove stray comment terminator treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE ...
Prepare input updates for 5.20 (or 6.0) merge window.
Pull input fixes from Dmitry Torokhov: - fix Goodix driver to properly behave on the Aya Neo Next - some more sanity checks in usbtouchscreen driver - a tweak in wm97xx driver in preparation for remove() to return void - a clarification in input core regarding units of measurement for resolution on touch events. * tag 'input-for-v5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: document the units for resolution of size axes Input: goodix - call acpi_device_fix_up_power() in some cases Input: wm97xx - make .remove() obviously always return 0 Input: usbtouchscreen - add driver_info sanity check