linux-stable.git/drivers/input/touchscreen, branch v4.9.232

Input: usbtouchscreen - add support for BonXeon TP

2020-06-03T06:16:37+00:00

[ Upstream commit e3b4f94ef52ae1592cbe199bd38dbdc0d58b2217 ]

Based on available information this uses the singletouch irtouch
protocol. This is tested and confirmed to be fully functional on
the BonXeon TP hardware I have.

Signed-off-by: James Hilliard 
Link: https://lore.kernel.org/r/20200413184217.55700-1-james.hilliard1@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: raydium_i2c_ts - fix error codes in raydium_i2c_boot_trigger()

2020-04-02T15:20:35+00:00

[ Upstream commit 32cf3a610c35cb21e3157f4bbf29d89960e30a36 ]

These functions are supposed to return negative error codes but instead
it returns true on failure and false on success.  The error codes are
eventually propagated back to user space.

Fixes: 48a2b783483b ("Input: add Raydium I2C touchscreen driver")
Signed-off-by: Dan Carpenter 
Link: https://lore.kernel.org/r/20200303101306.4potflz7na2nn3od@kili.mountain
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: raydium_i2c_ts - use true and false for boolean values

2020-04-02T15:20:35+00:00

[ Upstream commit 6cad4e269e25dddd7260a53e9d9d90ba3a3cc35a ]

Return statements in functions returning bool should use true or false
instead of an integer value.

This code was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: edt-ft5x06 - work around first register access error

2020-02-28T14:42:31+00:00

[ Upstream commit e112324cc0422c046f1cf54c56f333d34fa20885 ]

The EP0700MLP1 returns bogus data on the first register read access
(reading the threshold parameter from register 0x00):

    edt_ft5x06 2-0038: crc error: 0xfc expected, got 0x40

It ignores writes until then. This patch adds a dummy read after which
the number of sensors and parameter read/writes work correctly.

Signed-off-by: Philipp Zabel 
Signed-off-by: Marco Felsch 
Tested-by: Andy Shevchenko 
Reviewed-by: Andy Shevchenko 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: sun4i-ts - add a check for devm_thermal_zone_of_sensor_register

2020-01-29T09:24:39+00:00

commit 97e24b095348a15ec08c476423c3b3b939186ad7 upstream.

The driver misses a check for devm_thermal_zone_of_sensor_register().
Add a check to fix it.

Fixes: e28d0c9cd381 ("input: convert sun4i-ts to use devm_thermal_zone_of_sensor_register")
Signed-off-by: Chuhong Yuan 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: sur40 - fix interface sanity checks

2020-01-29T09:24:39+00:00

commit 6b32391ed675827f8425a414abbc6fbd54ea54fe upstream.

Make sure to use the current alternate setting when verifying the
interface descriptors to avoid binding to an invalid interface.

This in turn could cause the driver to misbehave or trigger a WARN() in
usb_submit_urb() that kernels with panic_on_warn set would choke on.

Fixes: bdb5c57f209c ("Input: add sur40 driver for Samsung SUR40 (aka MS Surface 2.0/Pixelsense)")
Signed-off-by: Johan Hovold 
Acked-by: Vladis Dronov 
Link: https://lore.kernel.org/r/20191210113737.4016-8-johan@kernel.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: atmel_mxt_ts - disable IRQ across suspend

2020-01-04T12:40:35+00:00

[ Upstream commit 463fa44eec2fef50d111ed0199cf593235065c04 ]

Across suspend and resume, we are seeing error messages like the following:

atmel_mxt_ts i2c-PRP0001:00: __mxt_read_reg: i2c transfer failed (-121)
atmel_mxt_ts i2c-PRP0001:00: Failed to read T44 and T5 (-121)

This occurs because the driver leaves its IRQ enabled. Upon resume, there
is an IRQ pending, but the interrupt is serviced before both the driver and
the underlying I2C bus have been resumed. This causes EREMOTEIO errors.

Disable the IRQ in suspend, and re-enable it on resume. If there are cases
where the driver enters suspend with interrupts disabled, that's a bug we
should fix separately.

Signed-off-by: Evan Green 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: goodix - add upside-down quirk for Teclast X89 tablet

2019-12-21T09:41:32+00:00

commit df5b5e555b356662a5e4a23c6774fdfce8547d54 upstream.

The touchscreen on the Teclast X89 is mounted upside down in relation to
the display orientation (the touchscreen itself is mounted upright, but the
display is mounted upside-down). Add a quirk for this so that we send
coordinates which match the display orientation.

Signed-off-by: Hans de Goede 
Reviewed-by: Bastien Nocera 
Link: https://lore.kernel.org/r/20191202085636.6650-1-hdegoede@redhat.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: cyttsp4_core - fix use after free bug

2019-12-21T09:40:48+00:00

[ Upstream commit 79aae6acbef16f720a7949f8fc6ac69816c79d62 ]

The device md->input is used after it is released. Setting the device
data to NULL is unnecessary as the device is never used again. Instead,
md->input should be assigned NULL to avoid accessing the freed memory
accidently. Besides, checking md->si against NULL is superfluous as it
points to a variable address, which cannot be NULL.

Signed-off-by: Pan Bian 
Link: https://lore.kernel.org/r/1572936379-6423-1-git-send-email-bianpan2016@163.com
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: silead - try firmware reload after unsuccessful resume

2019-11-25T08:53:37+00:00

[ Upstream commit dde27443211062e841806feaf690674b7c3a599f ]

A certain silead controller (Chip ID: 0x56810000) loses its firmware
after suspend, causing the resume to fail. This patch tries to load
the firmware, should a resume error occur and retries the resuming.

Signed-off-by: Julian Sax 
Acked-by: Hans de Goede 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin