linux-stable.git/drivers/input/touchscreen, branch v4.9.206

Input: silead - try firmware reload after unsuccessful resume

2019-11-25T08:53:37+00:00

[ Upstream commit dde27443211062e841806feaf690674b7c3a599f ]

A certain silead controller (Chip ID: 0x56810000) loses its firmware
after suspend, causing the resume to fail. This patch tries to load
the firmware, should a resume error occur and retries the resuming.

Signed-off-by: Julian Sax 
Acked-by: Hans de Goede 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: st1232 - set INPUT_PROP_DIRECT property

2019-11-25T08:53:36+00:00

[ Upstream commit 20bbb312079494a406c10c90932e3c80837c9d94 ]

This is how userspace checks for touchscreen devices most reliably.

Signed-off-by: Martin Kepplinger 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

input: rohm_bu21023: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT)

2018-09-26T06:36:39+00:00

[ Upstream commit 193c2a07cfaacb9249ab0e3d34bce32490879355 ]

Locking the root adapter for __i2c_transfer will deadlock if the
device sits behind a mux-locked I2C mux. Switch to the finer-grained
i2c_lock_bus with the I2C_LOCK_SEGMENT flag. If the device does not
sit behind a mux-locked mux, the two locking variants are equivalent.

Signed-off-by: Peter Rosin 
Acked-by: Dmitry Torokhov 
Signed-off-by: Wolfram Sang 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

Input: atmel_mxt_ts - only use first T9 instance

2018-09-19T20:47:15+00:00

[ Upstream commit 36f5d9ef26e52edff046b4b097855db89bf0cd4a ]

The driver only registers one input device, which uses the screen
parameters from the first T9 instance. The first T63 instance also uses
those parameters.

It is incorrect to send input reports from the second instances of these
objects if they are enabled: the input scaling will be wrong and the
positions will be mashed together.

This also causes problems on Android if the number of slots exceeds 32.

In the future, this could be handled by looking for enabled touch object
instances and creating an input device for each one.

Signed-off-by: Nick Dyer 
Acked-by: Benson Leung 
Acked-by: Yufeng Shen 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

Input: goodix - add new ACPI id for GPD Win 2 touch screen

2018-06-16T07:52:34+00:00

commit 5ca4d1ae9bad0f59bd6f851c39b19f5366953666 upstream.

GPD Win 2 Website: http://www.gpd.hk/gpdwin2.asp

Tested on a unit from the first production run sent to Indiegogo backers

Signed-off-by: Ethan Lee 
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: atmel_mxt_ts - add touchpad button mapping for Samsung Chromebook Pro

2018-05-09T07:50:20+00:00

commit f372b81101e6895252298e563d634d5e44ae81e7 upstream.

This patch adds the correct platform data information for the Caroline
Chromebook, so that the mouse button does not get stuck in pressed state
after the first click.

The Samus button keymap and platform data definition are the correct
ones for Caroline, so they have been reused here.

Signed-off-by: Vittorio Gambaletta 
Signed-off-by: Salvatore Bellizzi 
Tested-by: Guenter Roeck 
Cc: stable@vger.kernel.org
[dtor: adjusted vendor spelling to match shipping firmware]
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: goodix - disable IRQs while suspended

2018-04-13T17:48:31+00:00

[ Upstream commit faec44b6838312484d63e82286087cf2d5ebb891 ]

We should not try to do any i2c transfers before the controller is
resumed (which happens before our resume method gets called).

So we need to disable our IRQ while suspended to enforce this. The
code paths for devices with GPIOs for the int and reset pins already
disable the IRQ the through goodix_free_irq().

This commit also disables the IRQ while suspended for devices without
GPIOs for the int and reset pins.

This fixes the i2c bus sometimes getting stuck after a suspend/resume
causing the touchscreen to sometimes not work after a suspend/resume.
This has been tested on a GPD pocked device.

BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10
BugLink: https://www.reddit.com/r/GPDPocket/comments/7niut2/fix_for_broken_touch_after_resume_all_linux/
Tested-by: Hans de Goede 
Signed-off-by: Hans de Goede 
Reviewed-by: Bastien Nocera 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

Input: ar1021_i2c - fix too long name in driver's device table

2018-03-24T10:00:09+00:00

[ Upstream commit 95123fc43560d6f4a60e74f72836e63cd8848f76 ]

The name field in structure i2c_device_id is 20 characters, and we expect
it to be NULL-terminated, however we are trying to stuff it with 21 bytes
and thus NULL-terminator is lost. This causes issues when one creates
device with name "MICROCHIP_AR1021_I2C" as i2c core cuts off the last "C",
and automatic module loading by alias does not work as result.

The -I2C suffix in the device name is superfluous, we know what bus we are
dealing with, so let's drop it. Also, no other driver uses capitals, and
the manufacturer name is normally not included, except in very rare cases
of incompatible name collisions.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116211
Fixes: dd4cae8bf166 ("Input: Add Microchip AR1021 i2c touchscreen")
Reviewed-By: Christian Gmeiner 
Tested-by: Martin Kepplinger 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

Input: tsc2007 - check for presence and power down tsc2007 during probe

2018-03-22T08:17:35+00:00

[ Upstream commit 934df23171e7c5b71d937104d4957891c39748ff ]

1. check if chip is really present and don't succeed if it isn't.
2. if it succeeds, power down the chip until accessed

Signed-off-by: H. Nikolaus Schaller 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

Input: 88pm860x-ts - fix child-node lookup

2018-01-23T18:57:07+00:00

commit 906bf7daa0618d0ef39f4872ca42218c29a3631f upstream.

Fix child node-lookup during probe, which ended up searching the whole
device tree depth-first starting at parent rather than just matching on
its children.

To make things worse, the parent node was prematurely freed, while the
child node was leaked.

Fixes: 2e57d56747e6 ("mfd: 88pm860x: Device tree support")
Signed-off-by: Johan Hovold 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman