linux-stable.git/drivers/input/touchscreen, branch v4.19.321

Input: silead - Always support 10 fingers

2024-07-27T08:33:41+00:00

[ Upstream commit 38a38f5a36da9820680d413972cb733349400532 ]

When support for Silead touchscreens was orginal added some touchscreens
with older firmware versions only supported 5 fingers and this was made
the default requiring the setting of a "silead,max-fingers=10" uint32
device-property for all touchscreen models which do support 10 fingers.

There are very few models with the old 5 finger fw, so in practice the
setting of the "silead,max-fingers=10" is boilerplate which needs to
be copy and pasted to every touchscreen config.

Reporting that 10 fingers are supported on devices which only support
5 fingers doesn't cause any problems for userspace in practice, since
at max 4 finger gestures are supported anyways. Drop the max_fingers
configuration and simply always assume 10 fingers.

Signed-off-by: Hans de Goede 
Acked-by: Dmitry Torokhov 
Link: https://lore.kernel.org/r/20240525193854.39130-2-hdegoede@redhat.com
Signed-off-by: Sasha Levin

Input: ads7846 - don't check penirq immediately for 7845

2023-03-11T15:31:43+00:00

[ Upstream commit fa9f4275b20ec7b2a8fb05c66362d10b36f9efec ]

To discard false readings, one should use "ti,penirq-recheck-delay-usecs".
Checking get_pendown_state() at the beginning, most of the time fails
causing malfunctioning.

Fixes: ffa458c1bd9b ("spi: ads7846 driver")
Signed-off-by: Luca Ellero 
Reviewed-by: Andy Shevchenko 
Link: https://lore.kernel.org/r/20230126105227.47648-4-l.ellero@asem.it
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: ads7846 - don't report pressure for ads7845

2023-03-11T15:31:43+00:00

[ Upstream commit d50584d783313c8b05b84d0b07a2142f1bde46dd ]

ADS7845 doesn't support pressure.
Avoid the following error reported by libinput-list-devices:
"ADS7845 Touchscreen: kernel bug: device has min == max on ABS_PRESSURE".

Fixes: ffa458c1bd9b ("spi: ads7846 driver")
Signed-off-by: Luca Ellero 
Reviewed-by: Andy Shevchenko 
Link: https://lore.kernel.org/r/20230126105227.47648-2-l.ellero@asem.it
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: elants_i2c - properly handle the reset GPIO when power is off

2023-01-18T10:30:12+00:00

[ Upstream commit a85fbd6498441694475716a4d5c65f9d3e073faf ]

As can be seen in elants_i2c_power_off(), we want the reset GPIO
asserted when power is off. The reset GPIO is active low so we need
the reset line logic low when power is off to avoid leakage.

We have a problem, though, at probe time. At probe time we haven't
powered the regulators on yet but we have:

  devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_LOW);

While that _looks_ right, it turns out that it's not. The
GPIOD_OUT_LOW doesn't mean to init the GPIO to low. It means init the
GPIO to "not asserted". Since this is an active low GPIO that inits it
to be high.

Let's fix this to properly init the GPIO. Now after both probe and
power off the state of the GPIO is consistent (it's "asserted" or
level low).

Once we fix this, we can see that at power on time we no longer to
assert the reset GPIO as the first thing. The reset GPIO is _always_
asserted before powering on. Let's fix powering on to account for
this.

Fixes: afe10358e47a ("Input: elants_i2c - wire up regulator support")
Signed-off-by: Douglas Anderson 
Link: https://lore.kernel.org/r/20221117123805.1.I9959ac561dd6e1e8e1ce7085e4de6167b27c574f@changeid
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: melfas_mip4 - fix return value check in mip4_probe()

2022-10-05T08:36:45+00:00

[ Upstream commit a54dc27bd25f20ee3ea2009584b3166d25178243 ]

devm_gpiod_get_optional() may return ERR_PTR(-EPROBE_DEFER),
add a minus sign to fix it.

Fixes: 6ccb1d8f78bd ("Input: add MELFAS MIP4 Touchscreen driver")
Signed-off-by: Yang Yingliang 
Link: https://lore.kernel.org/r/20220924030715.1653538-1-yangyingliang@huawei.com
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: stmfts - fix reference leak in stmfts_input_open

2022-05-25T07:10:37+00:00

[ Upstream commit 26623eea0da3476446909af96c980768df07bbd9 ]

pm_runtime_get_sync() will increment pm usage counter even it
failed. Forgetting to call pm_runtime_put_noidle will result
in reference leak in stmfts_input_open, so we should fix it.

Signed-off-by: Zheng Yongjun 
Link: https://lore.kernel.org/r/20220317131604.53538-1-zhengyongjun3@huawei.com
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: atmel_mxt_ts - fix double free in mxt_read_info_block

2021-12-29T11:20:46+00:00

commit 12f247ab590a08856441efdbd351cf2cc8f60a2d upstream.

The "id_buf" buffer is stored in "data->raw_info_block" and freed by
"mxt_free_object_table" in case of error.

Return instead of jumping to avoid a double free.

Addresses-Coverity-ID: 1474582 ("Double free")
Fixes: 068bdb67ef74 ("Input: atmel_mxt_ts - fix the firmware update")
Signed-off-by: José Expósito 
Link: https://lore.kernel.org/r/20211212194257.68879-1-jose.exposito89@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: touchscreen - avoid bitwise vs logical OR warning

2021-12-22T08:19:04+00:00

commit a02dcde595f7cbd240ccd64de96034ad91cffc40 upstream.

A new warning in clang points out a few places in this driver where a
bitwise OR is being used with boolean types:

drivers/input/touchscreen.c:81:17: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
        data_present = touchscreen_get_prop_u32(dev, "touchscreen-min-x",
                       ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This use of a bitwise OR is intentional, as bitwise operations do not
short circuit, which allows all the calls to touchscreen_get_prop_u32()
to happen so that the last parameter is initialized while coalescing the
results of the calls to make a decision after they are all evaluated.

To make this clearer to the compiler, use the '|=' operator to assign
the result of each touchscreen_get_prop_u32() call to data_present,
which keeps the meaning of the code the same but makes it obvious that
every one of these calls is expected to happen.

Signed-off-by: Nathan Chancellor 
Reported-by: Nick Desaulniers 
Reviewed-by: Nick Desaulniers 
Link: https://lore.kernel.org/r/20211014205757.3474635-1-nathan@kernel.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Anders Roxell 
Signed-off-by: Greg Kroah-Hartman

Input: hideep - fix the uninitialized use in hideep_nvm_unlock()

2021-07-20T14:16:09+00:00

[ Upstream commit cac7100d4c51c04979dacdfe6c9a5e400d3f0a27 ]

Inside function hideep_nvm_unlock(), variable "unmask_code" could
be uninitialized if hideep_pgm_r_reg() returns error, however, it
is used in the later if statement after an "and" operation, which
is potentially unsafe.

Signed-off-by: Yizhuo 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: usbtouchscreen - fix control-request directions

2021-07-20T14:15:38+00:00

commit 41e81022a04a0294c55cfa7e366bc14b9634c66e upstream.

The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.

Fix the four control requests which erroneously used usb_rcvctrlpipe().

Fixes: 1d3e20236d7a ("[PATCH] USB: usbtouchscreen: unified USB touchscreen driver")
Fixes: 24ced062a296 ("usbtouchscreen: add support for DMC TSC-10/25 devices")
Fixes: 9e3b25837a20 ("Input: usbtouchscreen - add support for e2i touchscreen controller")
Signed-off-by: Johan Hovold 
Cc: stable@vger.kernel.org      # 2.6.17
Link: https://lore.kernel.org/r/20210524092048.4443-1-johan@kernel.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman