linux-stable.git/drivers/input/touchscreen, branch linux-6.14.y Linux kernel stable tree Input: cyttsp5 - fix power control issue on wakeup 2025-05-18T06:25:59+00:00 Mikael Gonella-Bolduc mgonellabolduc@dimonoff.com 2025-04-23T13:52:43+00:00 b320bba0ab541cd52bfeb6dcf384a81e21792d24 commit 7675b5efd81fe6d524e29d5a541f43201e98afa8 upstream. The power control function ignores the "on" argument when setting the report ID, and thus is always sending HID_POWER_SLEEP. This causes a problem when trying to wakeup. Fix by sending the state variable, which contains the proper HID_POWER_ON or HID_POWER_SLEEP based on the "on" argument. Fixes: 3c98b8dbdced ("Input: cyttsp5 - implement proper sleep and wakeup procedures") Cc: stable@vger.kernel.org Signed-off-by: Mikael Gonella-Bolduc <mgonellabolduc@dimonoff.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Alistair Francis <alistair@alistair23.me> Link: https://lore.kernel.org/r/20250423135243.1261460-1-hugo@hugovil.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7675b5efd81fe6d524e29d5a541f43201e98afa8 upstream.

The power control function ignores the "on" argument when setting the
report ID, and thus is always sending HID_POWER_SLEEP. This causes a
problem when trying to wakeup.

Fix by sending the state variable, which contains the proper HID_POWER_ON or
HID_POWER_SLEEP based on the "on" argument.

Fixes: 3c98b8dbdced ("Input: cyttsp5 - implement proper sleep and wakeup procedures")
Cc: stable@vger.kernel.org
Signed-off-by: Mikael Gonella-Bolduc <mgonellabolduc@dimonoff.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/20250423135243.1261460-1-hugo@hugovil.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: cyttsp5 - ensure minimum reset pulse width 2025-05-18T06:25:59+00:00 Hugo Villeneuve hvilleneuve@dimonoff.com 2025-04-10T18:46:32+00:00 fe27bfb637998e33bdda2258544b86990385e1da commit c6cb8bf79466ae66bd0d07338c7c505ce758e9d7 upstream. The current reset pulse width is measured to be 5us on a Renesas RZ/G2L SOM. The manufacturer's minimum reset pulse width is specified as 10us. Extend reset pulse width to make sure it is long enough on all platforms. Also reword confusing comments about reset pin assertion. Fixes: 5b0c03e24a06 ("Input: Add driver for Cypress Generation 5 touchscreen") Cc: stable@vger.kernel.org Acked-by: Alistair Francis <alistair@alistair23.me> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20250410184633.1164837-1-hugo@hugovil.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c6cb8bf79466ae66bd0d07338c7c505ce758e9d7 upstream.

The current reset pulse width is measured to be 5us on a
Renesas RZ/G2L SOM. The manufacturer's minimum reset pulse width is
specified as 10us.

Extend reset pulse width to make sure it is long enough on all platforms.

Also reword confusing comments about reset pin assertion.

Fixes: 5b0c03e24a06 ("Input: Add driver for Cypress Generation 5 touchscreen")
Cc: stable@vger.kernel.org
Acked-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20250410184633.1164837-1-hugo@hugovil.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: goodix-berlin - fix vddio regulator references 2025-02-25T06:28:50+00:00 Luca Weiss luca.weiss@fairphone.com 2025-01-03T09:21:36+00:00 3b0011059334a1cf554c2c1f67d7a7b822d8238a As per dt-bindings the property is called vddio-supply, so use the correct name in the driver instead of iovdd. The datasheet also calls the supply 'VDDIO'. Fixes: 44362279bdd4 ("Input: add core support for Goodix Berlin Touchscreen IC") Cc: stable@vger.kernel.org Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250103-goodix-berlin-fixes-v1-2-b014737b08b2@fairphone.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
As per dt-bindings the property is called vddio-supply, so use the
correct name in the driver instead of iovdd. The datasheet also calls
the supply 'VDDIO'.

Fixes: 44362279bdd4 ("Input: add core support for Goodix Berlin Touchscreen IC")
Cc: stable@vger.kernel.org
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250103-goodix-berlin-fixes-v1-2-b014737b08b2@fairphone.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: goodix-berlin - fix comment referencing wrong regulator 2025-02-25T06:28:49+00:00 Luca Weiss luca.weiss@fairphone.com 2025-01-03T09:21:35+00:00 5bab1ae5a375ccde25ac9a142ea933a5d3bdf38d In the statement above AVDD gets enabled, and not IOVDD, so fix this copy-paste mistake. Fixes: 44362279bdd4 ("Input: add core support for Goodix Berlin Touchscreen IC") Reported-by: Jens Reidel <adrian@travitia.xyz> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250103-goodix-berlin-fixes-v1-1-b014737b08b2@fairphone.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
In the statement above AVDD gets enabled, and not IOVDD, so fix this
copy-paste mistake.

Fixes: 44362279bdd4 ("Input: add core support for Goodix Berlin Touchscreen IC")
Reported-by: Jens Reidel <adrian@travitia.xyz>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250103-goodix-berlin-fixes-v1-1-b014737b08b2@fairphone.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: imagis - add support for imagis IST3038H 2025-02-25T02:11:06+00:00 Andras Sebok sebokandris2009@gmail.com 2025-02-24T09:03:54+00:00 83a4a5a82a154277dfe61d135a445901cd6d0e6f Add support for imagis IST3038H, which seems mostly compatible with IST3038C except that it reports a different chip ID value. Tested on samsung,j5y17lte. Signed-off-by: Andras Sebok <sebokandris2009@gmail.com> Link: https://lore.kernel.org/r/20250224090354.102903-2-sebokandris2009@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
Add support for imagis IST3038H, which seems mostly compatible with
IST3038C except that it reports a different chip ID value.

Tested on samsung,j5y17lte.

Signed-off-by: Andras Sebok <sebokandris2009@gmail.com>
Link: https://lore.kernel.org/r/20250224090354.102903-2-sebokandris2009@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: ads7846 - fix gpiod allocation 2025-02-03T12:37:57+00:00 H. Nikolaus Schaller hns@goldelico.com 2025-02-01T11:43:24+00:00 c9ccb88f534ca760d06590b67571c353a2f0cbcd commit 767d83361aaa ("Input: ads7846 - Convert to use software nodes") has simplified the code but accidentially converted a devm_gpiod_get() to gpiod_get(). This leaves the gpio reserved on module remove and the driver can no longer be loaded again. Fixes: 767d83361aaa ("Input: ads7846 - Convert to use software nodes") Cc: stable@vger.kernel.org Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Link: https://lore.kernel.org/r/6e9b143f19cdfda835711a8a7a3966e5a2494cff.1738410204.git.hns@goldelico.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
commit 767d83361aaa ("Input: ads7846 - Convert to use software nodes")

has simplified the code but accidentially converted a devm_gpiod_get()
to gpiod_get(). This leaves the gpio reserved on module remove and the
driver can no longer be loaded again.

Fixes: 767d83361aaa ("Input: ads7846 - Convert to use software nodes")
Cc: stable@vger.kernel.org
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/6e9b143f19cdfda835711a8a7a3966e5a2494cff.1738410204.git.hns@goldelico.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: wdt87xx_i2c - fix compiler warning 2025-01-22T18:40:00+00:00 Yu-Chun Lin eleanor15x@gmail.com 2025-01-19T08:43:12+00:00 c8084a89bd91b05f51a36bff61f63a94c800b0d6 As reported by the kernel test robot, the following warning occur: >> drivers/input/touchscreen/wdt87xx_i2c.c:1166:36: warning: 'wdt87xx_acpi_id' defined but not used [-Wunused-const-variable=] 1166 | static const struct acpi_device_id wdt87xx_acpi_id[] = { | ^~~~~~~~~~~~~~~ The 'wdt87xx_acpi_id' array is only used when CONFIG_ACPI is enabled. Wrapping its definition and 'MODULE_DEVICE_TABLE' in '#ifdef CONFIG_ACPI' prevents a compiler warning when ACPI is disabled. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202501181549.uzdlBwuN-lkp@intel.com/ Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com> Link: https://lore.kernel.org/r/20250119084312.1851486-1-eleanor15x@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
As reported by the kernel test robot, the following warning occur:

>> drivers/input/touchscreen/wdt87xx_i2c.c:1166:36: warning: 'wdt87xx_acpi_id' defined but not used [-Wunused-const-variable=]
    1166 | static const struct acpi_device_id wdt87xx_acpi_id[] = {
         |                                    ^~~~~~~~~~~~~~~

The 'wdt87xx_acpi_id' array is only used when CONFIG_ACPI is enabled.
Wrapping its definition and 'MODULE_DEVICE_TABLE' in '#ifdef CONFIG_ACPI'
prevents a compiler warning when ACPI is disabled.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501181549.uzdlBwuN-lkp@intel.com/
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Link: https://lore.kernel.org/r/20250119084312.1851486-1-eleanor15x@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: Use str_enable_disable-like helpers 2025-01-14T21:41:41+00:00 Krzysztof Kozlowski krzysztof.kozlowski@linaro.org 2025-01-14T21:40:22+00:00 7ef9bdec9a22ad48a76e0c446d54b2274eaf2fca Replace ternary (condition ? "enable" : "disable") syntax with helpers from string_choices.h because: 1. Simple function call with one argument is easier to read. Ternary operator has three arguments and with wrapping might lead to quite long code. 2. Is slightly shorter thus also easier to read. 3. It brings uniformity in the text - same string. 4. Allows deduping by the linker, which results in a smaller binary file. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250114192701.912430-1-krzysztof.kozlowski@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read.  Ternary
   operator has three arguments and with wrapping might lead to quite
   long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
   file.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250114192701.912430-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Merge tag 'input-for-v6.13-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input 2024-11-25T18:31:39+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-11-25T18:31:39+00:00 3e51108c72e8adbcf3180ed40527a2a9d2d0123b Pull input updates from Dmitry Torokhov: - support for NT36672A touchscreen added to novatek-nvt-ts driver - a change to ads7846 driver to prevent XPT2046 from locking up - a change switching platform input dirves back to using remove() method (from remove_new()) - updates to a number of input drivers to use the new cleanup facilities (__free(...), guard(), and scoped-guard()) which ensure that the resources and locks are released properly and automatically - other assorted driver cleanups and fixes. * tag 'input-for-v6.13-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (109 commits) Input: mpr121 - use devm_regulator_get_enable_read_voltage() Input: sun4i-lradc-keys - don't include 'pm_wakeup.h' directly Input: spear-keyboard - don't include 'pm_wakeup.h' directly Input: cypress-sf - constify struct i2c_device_id Input: ads7846 - increase xfer array size in 'struct ser_req' Input: fix the input_event struct documentation Input: i8042 - fix typo dublicate to duplicate Input: ads7846 - add dummy command register clearing cycle Input: cs40l50 - fix wrong usage of INIT_WORK() Input: introduce notion of passive observers for input handlers Input: maple_keyb - use guard notation when acquiring mutex Input: locomokbd - use guard notation when acquiring spinlock Input: hilkbd - use guard notation when acquiring spinlock Input: synaptics-rmi4 - switch to using cleanup functions in F34 Input: synaptics - fix a typo dt-bindings: input: rotary-encoder: Fix "rotary-encoder,rollover" type Input: omap-keypad - use guard notation when acquiring mutex Input: imagis - fix warning regarding 'imagis_3038_data' being unused Input: userio - remove unneeded semicolon Input: sparcspkr - use cleanup facility for device_node ... 
Pull input updates from Dmitry Torokhov:

 - support for NT36672A touchscreen added to novatek-nvt-ts driver

 - a change to ads7846 driver to prevent XPT2046 from locking up

 - a change switching platform input dirves back to using remove()
   method (from remove_new())

 - updates to a number of input drivers to use the new cleanup
   facilities (__free(...), guard(), and scoped-guard()) which ensure
   that the resources and locks are released properly and automatically

 - other assorted driver cleanups and fixes.

* tag 'input-for-v6.13-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (109 commits)
  Input: mpr121 - use devm_regulator_get_enable_read_voltage()
  Input: sun4i-lradc-keys - don't include 'pm_wakeup.h' directly
  Input: spear-keyboard - don't include 'pm_wakeup.h' directly
  Input: cypress-sf - constify struct i2c_device_id
  Input: ads7846 - increase xfer array size in 'struct ser_req'
  Input: fix the input_event struct documentation
  Input: i8042 - fix typo dublicate to duplicate
  Input: ads7846 - add dummy command register clearing cycle
  Input: cs40l50 - fix wrong usage of INIT_WORK()
  Input: introduce notion of passive observers for input handlers
  Input: maple_keyb - use guard notation when acquiring mutex
  Input: locomokbd - use guard notation when acquiring spinlock
  Input: hilkbd - use guard notation when acquiring spinlock
  Input: synaptics-rmi4 - switch to using cleanup functions in F34
  Input: synaptics - fix a typo
  dt-bindings: input: rotary-encoder: Fix "rotary-encoder,rollover" type
  Input: omap-keypad - use guard notation when acquiring mutex
  Input: imagis - fix warning regarding 'imagis_3038_data' being unused
  Input: userio - remove unneeded semicolon
  Input: sparcspkr - use cleanup facility for device_node
  ...
Merge branch 'next' into for-linus 2024-11-25T01:05:27+00:00 Dmitry Torokhov dmitry.torokhov@gmail.com 2024-11-25T01:05:27+00:00 0201710ba6308a61f1a775c418fe74b8a31ace08 Prepare input updates for 6.13 merge window. 
Prepare input updates for 6.13 merge window.