linux-stable.git/drivers/input/mouse, branch v5.4.285

Input: elan_i2c - do not leave interrupt disabled on suspend failure

2024-08-19T03:33:33+00:00

[ Upstream commit 5f82c1e04721e7cd98e604eb4e58f0724d8e5a65 ]

Make sure interrupts are not left disabled when we fail to suspend the
touch controller.

Fixes: 6696777c6506 ("Input: add driver for Elan I2C/SMbus touchpad")
Link: https://lore.kernel.org/r/ZmKiiL-1wzKrhqBj@google.com
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: elantech - fix touchpad state on resume for Lenovo N24

2024-07-27T08:38:30+00:00

[ Upstream commit a69ce592cbe0417664bc5a075205aa75c2ec1273 ]

The Lenovo N24 on resume becomes stuck in a state where it
sends incorrect packets, causing elantech_packet_check_v4 to fail.
The only way for the device to resume sending the correct packets is for
it to be disabled and then re-enabled.

This change adds a dmi check to trigger this behavior on resume.

Signed-off-by: Jonathan Denose 
Link: https://lore.kernel.org/r/20240503155020.v2.1.Ifa0e25ebf968d8f307f58d678036944141ab17e6@changeid
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: synaptics-rmi4 - handle reset delay when using SMBus trsnsport

2023-11-08T10:23:40+00:00

[ Upstream commit 5030b2fe6aab37fe42d14f31842ea38be7c55c57 ]

Touch controllers need some time after receiving reset command for the
firmware to finish re-initializing and be ready to respond to commands
from the host. The driver already had handling for the post-reset delay
for I2C and SPI transports, this change adds the handling to
SMBus-connected devices.

SMBus devices are peculiar because they implement legacy PS/2
compatibility mode, so reset is actually issued by psmouse driver on the
associated serio port, after which the control is passed to the RMI4
driver with SMBus companion device.

Note that originally the delay was added to psmouse driver in
92e24e0e57f7 ("Input: psmouse - add delay when deactivating for SMBus
mode"), but that resulted in an unwanted delay in "fast" reconnect
handler for the serio port, so it was decided to revert the patch and
have the delay being handled in the RMI4 driver, similar to the other
transports.

Tested-by: Jeffery Miller 
Link: https://lore.kernel.org/r/ZR1yUFJ8a9Zt606N@penguin
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: psmouse - fix fast_reconnect function for PS/2 mode

2023-10-25T09:53:19+00:00

commit e2cb5cc822b6c9ee72c56ce1d81671b22c05406a upstream.

When the SMBus connection is attempted psmouse_smbus_init() sets
the fast_reconnect pointer to psmouse_smbus_reconnecti(). If SMBus
initialization fails, elantech_setup_ps2() and synaptics_init_ps2() will
fallback to PS/2 mode, replacing the psmouse private data. This can cause
issues on resume, since psmouse_smbus_reconnect() expects to find an
instance of struct psmouse_smbus_dev in psmouse->private.

The issue was uncovered when in 92e24e0e57f7 ("Input: psmouse - add
delay when deactivating for SMBus mode") psmouse_smbus_reconnect()
started attempting to use more of the data structure. The commit was
since reverted, not because it was at fault, but because there was found
a better way of doing what it was attempting to do.

Fix the problem by resetting the fast_reconnect pointer in psmouse
structure in elantech_setup_ps2() and synaptics_init_ps2() when the PS/2
mode is used.

Reported-by: Thorsten Leemhuis 
Tested-by: Thorsten Leemhuis 
Signed-off-by: Jeffery Miller 
Fixes: bf232e460a35 ("Input: psmouse-smbus - allow to control psmouse_deactivate")
Link: https://lore.kernel.org/r/20231005002249.554877-1-jefferymiller@google.com
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: psmouse - fix OOB access in Elantech protocol

2023-06-14T08:59:56+00:00

commit 7b63a88bb62ba2ddf5fcd956be85fe46624628b9 upstream.

The kernel only allocate 5 MT slots; check that transmitted slot ID
falls within the acceptable range.

Link: https://lore.kernel.org/r/ZFnEL91nrT789dbG@google.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: focaltech - use explicitly signed char type

2023-04-05T09:16:45+00:00

commit 8980f190947ba29f23110408e712444884b74251 upstream.

The recent change of -funsigned-char causes additions of negative
numbers to become additions of large positive numbers, leading to wrong
calculations of mouse movement. Change these casts to be explicitly
signed, to take into account negative offsets.

Fixes: 3bc753c06dd0 ("kbuild: treat char as always unsigned")
Signed-off-by: Jason A. Donenfeld 
Reviewed-by: Hans de Goede 
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217211
Link: https://lore.kernel.org/r/20230318133010.1285202-1-Jason@zx2c4.com
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: alps - fix compatibility with -funsigned-char

2023-04-05T09:16:44+00:00

commit 754ff5060daf5a1cf4474eff9b4edeb6c17ef7ab upstream.

The AlpsPS/2 code previously relied on the assumption that `char` is a
signed type, which was true on x86 platforms (the only place where this
driver is used) before kernel 6.2. However, on 6.2 and later, this
assumption is broken due to the introduction of -funsigned-char as a new
global compiler flag.

Fix this by explicitly specifying the signedness of `char` when sign
extending the values received from the device.

Fixes: f3f33c677699 ("Input: alps - Rushmore and v7 resolution support")
Signed-off-by: msizanoen 
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230320045228.182259-1-msizanoen@qtmlabs.xyz
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Revert "Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode"

2023-02-06T06:52:47+00:00

commit 3c44e2b6cde674797b76e76d3a903a63ce8a18bb upstream.

This reverts commit ac5408991ea6b06e29129b4d4861097c4c3e0d59 because
it causes loss of keyboard on HP 15-da1xxx.

Fixes: ac5408991ea6 ("Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode")
Reported-by: Jiri Slaby 
Link: https://lore.kernel.org/r/824effa5-8b9a-c28a-82bb-9b0ab24623e1@kernel.org
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1206358
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode

2022-12-08T10:23:00+00:00

[ Upstream commit ac5408991ea6b06e29129b4d4861097c4c3e0d59 ]

The device works fine in native RMI mode, there is no reason to use legacy
PS/2 mode with it.

Signed-off-by: Aman Dhoot 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: bcm5974 - set missing URB_NO_TRANSFER_DMA_MAP urb flag

2022-06-14T16:12:03+00:00

commit c42e65664390be7c1ef3838cd84956d3a2739d60 upstream.

The bcm5974 driver does the allocation and dma mapping of the usb urb
data buffer, but driver does not set the URB_NO_TRANSFER_DMA_MAP flag
to let usb core know the buffer is already mapped.

usb core tries to map the already mapped buffer, causing a warning:
"xhci_hcd 0000:00:14.0: rejecting DMA map of vmalloc memory"

Fix this by setting the URB_NO_TRANSFER_DMA_MAP, letting usb core
know buffer is already mapped by bcm5974 driver

Signed-off-by: Mathias Nyman 
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215890
Link: https://lore.kernel.org/r/20220606113636.588955-1-mathias.nyman@linux.intel.com
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman