linux-stable.git/drivers/input/mouse, branch v3.2.65

Input: alps - allow up to 2 invalid packets without resetting device

2014-12-14T16:23:56+00:00

commit 9d720b34c0a432639252f63012e18b0507f5b432 upstream.

On some Dell Latitude laptops ALPS device or Dell EC send one invalid byte
in 6 bytes ALPS packet. In this case psmouse driver enter out of sync
state. It looks like that all other bytes in packets are valid and also
device working properly. So there is no need to do full device reset, just
need to wait for byte which match condition for first byte (start of
packet). Because ALPS packets are bigger (6 or 8 bytes) default limit is
small.

This patch increase number of invalid bytes to size of 2 ALPS packets which
psmouse driver can drop before do full reset.

Resetting ALPS devices take some time and when doing reset on some Dell
laptops touchpad, trackstick and also keyboard do not respond. So it is
better to do it only if really necessary.

Signed-off-by: Pali Rohár 
Tested-by: Pali Rohár 
Reviewed-by: Hans de Goede 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Ben Hutchings

Input: alps - ignore potential bare packets when device is out of sync

2014-12-14T16:23:55+00:00

commit 4ab8f7f320f91f279c3f06a9795cfea5c972888a upstream.

5th and 6th byte of ALPS trackstick V3 protocol match condition for first
byte of PS/2 3 bytes packet. When driver enters out of sync state and ALPS
trackstick is sending data then driver match 5th, 6th and next 1st bytes as
PS/2.

It basically means if user is using trackstick when driver is in out of
sync state driver will never resync. Processing these bytes as 3 bytes PS/2
data cause total mess (random cursor movements, random clicks) and make
trackstick unusable until psmouse driver decide to do full device reset.

Lot of users reported problems with ALPS devices on Dell Latitude E6440,
E6540 and E7440 laptops. ALPS device or Dell EC for unknown reason send
some invalid ALPS PS/2 bytes which cause driver out of sync. It looks like
that i8042 and psmouse/alps driver always receive group of 6 bytes packets
so there are no missing bytes and no bytes were inserted between valid
ones.

This patch does not fix root of problem with ALPS devices found in Dell
Latitude laptops but it does not allow to process some (invalid)
subsequence of 6 bytes ALPS packets as 3 bytes PS/2 when driver is out of
sync.

So with this patch trackstick input device does not report bogus data when
also driver is out of sync, so trackstick should be usable on those
machines.

Signed-off-by: Pali Rohár 
Tested-by: Pali Rohár 
Reviewed-by: Hans de Goede 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Ben Hutchings

Input: synaptics - gate forcepad support by DMI check

2014-12-14T16:23:48+00:00

commit aa972409951e0675e07918620427517cad5090e0 upstream.

Unfortunately, ForcePad capability is not actually exported over PS/2, so
we have to resort to DMI checks.

Reported-by: Nicole Faerber 
Signed-off-by: Dmitry Torokhov 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

Input: synaptics - add support for ForcePads

2014-11-05T20:27:42+00:00

commit 5715fc764f7753d464dbe094b5ef9cffa6e479a4 upstream.

ForcePads are found on HP EliteBook 1040 laptops. They lack any kind of
physical buttons, instead they generate primary button click when user
presses somewhat hard on the surface of the touchpad. Unfortunately they
also report primary button click whenever there are 2 or more contacts
on the pad, messing up all multi-finger gestures (2-finger scrolling,
multi-finger tapping, etc). To cope with this behavior we introduce a
delay (currently 50 msecs) in reporting primary press in case more
contacts appear.

Reviewed-by: Hans de Goede 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Ben Hutchings

Input: elantech - fix detection of touchpad on ASUS s301l

2014-11-05T20:27:41+00:00

commit 271329b3c798b2102120f5df829071c211ef00ed upstream.

Adjust Elantech signature validation to account fo rnewer models of
touchpads.

Reported-and-tested-by: Màrius Monton 
Signed-off-by: Hans de Goede 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Ben Hutchings

Input: synaptics - fix resolution for manually provided min/max

2014-07-11T12:33:48+00:00

commit d49cb7aeebb974713f9f7ab2991352d3050b095b upstream.

commit 421e08c41fda fixed the reported min/max for the X and Y axis,
but unfortunately, it broke the resolution of those same axis.

On the t540p, the resolution is the same regarding X and Y. It is not
a problem for xf86-input-synaptics because this driver is only interested
in the ratio between X and Y.
Unfortunately, xf86-input-cmt uses directly the resolution, and having a
null resolution leads to some divide by 0 errors, which are translated by
-infinity in the resulting coordinates.

Reported-by: Peter Hutterer 
Signed-off-by: Benjamin Tissoires 
Signed-off-by: Dmitry Torokhov 
[bwh: Backported to 3.2: I didn't apply the PNP ID changes, so the
 code being moved looks different]
Signed-off-by: Ben Hutchings

Input: elantech - don't set bit 1 of reg_10 when the no_hw_res quirk is set

2014-07-11T12:33:48+00:00

commit fb4f8f568a9def02240ef9bf7aabd246dc63a081 upstream.

The touchpad on the GIGABYTE U2442 not only stops communicating when we try
to set bit 3 (enable real hardware resolution) of reg_10, but on some BIOS
versions also when we set bit 1 (enable two finger mode auto correct).

I've asked the original reporter of:
https://bugzilla.kernel.org/show_bug.cgi?id=61151

To check that not setting bit 1 does not lead to any adverse effects on his
model / BIOS revision, and it does not, so this commit fixes the touchpad
not working on these versions by simply never setting bit 1 for laptop
models with the no_hw_res quirk.

Reported-and-tested-by: James Lademann 
Tested-by: Philipp Wolfer 
Signed-off-by: Hans de Goede 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Ben Hutchings

Input: elantech - deal with clickpads reporting right button events

2014-07-11T12:33:48+00:00

commit cd9e83e2754465856097f31c7ab933ce74c473f8 upstream.

At least the Dell Vostro 5470 elantech *clickpad* reports right button
clicks when clicked in the right bottom area:

https://bugzilla.redhat.com/show_bug.cgi?id=1103528

This is different from how (elantech) clickpads normally operate, normally
no matter where the user clicks on the pad the pad always reports a left
button event, since there is only 1 hardware button beneath the path.

It looks like Dell has put 2 buttons under the pad, one under each bottom
corner, causing this.

Since this however still clearly is a real clickpad hardware-wise, we still
want to report it as such to userspace, so that things like finger movement
in the bottom area can be properly ignored as it should be on clickpads.

So deal with this weirdness by simply mapping a right click to a left click
on elantech clickpads. As an added advantage this is something which we can
simply do on all elantech clickpads, so no need to add special quirks for
this weird model.

Reported-and-tested-by: Elder Marco 
Signed-off-by: Hans de Goede 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Ben Hutchings

Input: synaptics - T540p - unify with other LEN0034 models

2014-07-11T12:33:36+00:00

commit 6d396ede224dc596d92d7cab433713536e68916c upstream.

The T540p has a touchpad with pnp-id LEN0034, all the models with this
pnp-id have the same min/max values, except the T540p where the values are
slightly off. Fix them to be identical.

This is a preparation patch for simplifying the quirk table.

Signed-off-by: Hans de Goede 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Ben Hutchings

Input: synaptics - add min/max quirk for the ThinkPad W540

2014-07-11T12:33:34+00:00

commit 0b5fe736fe923f1f5e05413878d5990e92ffbdf5 upstream.

https://bugzilla.redhat.com/show_bug.cgi?id=1096436

Tested-and-reported-by: ajayr@bigfoot.com
Signed-off-by: Hans de Goede 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Ben Hutchings