linux-stable.git/drivers/input/mouse, branch v3.12.71

Input: elantech - add Fujitsu Lifebook E556 to force crc_enabled

2016-10-28T18:37:00+00:00

commit 62837b3c1a95535d1a287c9c8c6563bbd8d37033 upstream.

Another Lifebook machine that needs the same quirk as other similar
models to make the driver working.

Also let's reorder elantech_dmi_force_crc_enabled list so LIfebook enries
are in alphabetical order.

Reported-by: William Linna 
Tested-by: William Linna 
Reviewed-by: Benjamin Tissoires 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Jiri Slaby

Input: elantech - force needed quirks on Fujitsu H760

2016-10-28T18:36:59+00:00

commit f9a703a54d16ba2470391c4b12236ee56591d50c upstream.

Just like Fujitsu CELSIUS H730, the H760 also has an Elantech touchpad with
the same quirks. Without this patch, the touchpad is useless out-of-the-box
as the mouse pointer won't move.

This patch makes the driver aware of both the crc_enabled=1 requirement and
the middle button, making the touchpad fully functional out-of-the-box.

Signed-off-by: Matti Kurkela 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Jiri Slaby

Input: elantech - mark protocols v2 and v3 as semi-mt

2016-02-25T09:49:10+00:00

commit 6544a1df11c48c8413071aac3316792e4678fbfb upstream.

When using a protocol v2 or v3 hardware, elantech uses the function
elantech_report_semi_mt_data() to report data. This devices are rather
creepy because if num_finger is 3, (x2,y2) is (0,0). Yes, only one valid
touch is reported.

Anyway, userspace (libinput) is now confused by these (0,0) touches,
and detect them as palm, and rejects them.

Commit 3c0213d17a09 ("Input: elantech - fix semi-mt protocol for v3 HW")
was sufficient enough for xf86-input-synaptics and libinput before it has
palm rejection. Now we need to actually tell libinput that this device is
a semi-mt one and it should not rely on the actual values of the 2 touches.

Signed-off-by: Benjamin Tissoires 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Jiri Slaby

Input: elantech - add Fujitsu Lifebook U745 to force crc_enabled

2016-02-25T09:49:10+00:00

commit 60603950f836ef4e88daddf61a273b91e671db2d upstream.

Another Lifebook machine that needs the same quirk as other similar
models to make the driver working.

Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=883192
Signed-off-by: Takashi Iwai 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Jiri Slaby

Input: psmouse - add small delay for IBM trackpoint pass-through mode

2015-10-28T15:38:29+00:00

commit 66bc2f51ef7deabc8b8f3baa98ae64b65e5e973a upstream.

There are trackpoint devices that fail to respond to the PS2 command
PSMOUSE_CMD_GETID if immediately queried after the parent device is
deactivated. Add a small delay for the hardware to get in a sane state
before sending any PS2 commands.

One example of such a system is:
Lenovo ThinkPad X120e, model 30515QG
synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x121c00, board id: 1811, fw id: 797391

Signed-off-by: Stefan Assmann 
Signed-off-by: Dmitry Torokhov 
Cc: Oliver Neukum 
Signed-off-by: Jiri Slaby

Input: elantech - fix detection of touchpads where the revision matches a known rate

2015-06-23T12:55:11+00:00

commit 5f0ee9d17aae628b22be86966471db65be21f262 upstream.

Make the check to skip the rate check more lax, so that it applies
to all hw_version 4 models.

This fixes the touchpad not being detected properly on Asus PU551LA
laptops.

Reported-and-tested-by: David Zafra Gómez 
Signed-off-by: Hans de Goede 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Jiri Slaby

Input: synaptics - add min/max quirk for Lenovo S540

2015-06-23T12:55:11+00:00

commit 7f2ca8b55aeff1fe51ed3570200ef88a96060917 upstream.

https://bugzilla.redhat.com/show_bug.cgi?id=1223051#c2

Tested-by: tommy.gagnes@gmail.com
Signed-off-by: Peter Hutterer 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Jiri Slaby

Input: elantech - fix semi-mt protocol for v3 HW

2015-06-03T09:33:14+00:00

commit 3c0213d17a09601e0c6c0ae0e27caf70d988290f upstream.

When the v3 hardware sees more than one finger, it uses the semi-mt
protocol to report the touches. However, it currently works when
num_fingers is 0, 1 or 2, but when it is 3 and above, it sends only 1
finger as if num_fingers was 1.

This confuses userspace which knows how to deal with extra fingers
when all the slots are used, but not when some are missing.

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=90101

Signed-off-by: Benjamin Tissoires 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Jiri Slaby

Input: elantech - fix absolute mode setting on some ASUS laptops

2015-05-04T09:50:01+00:00

commit bd884149aca61de269fd9bad83fe2a4232ffab21 upstream.

On ASUS TP500LN and X750JN, the touchpad absolute mode is reset each
time set_rate is done.

In order to fix this, we will verify the firmware version, and if it
matches the one in those laptops, the set_rate function is overloaded
with a function elantech_set_rate_restore_reg_07 that performs the
set_rate with the original function, followed by a restore of reg_07
(the register that sets the absolute mode on elantech v4 hardware).

Also the ASUS TP500LN and X750JN firmware version, capabilities, and
button constellation is added to elantech.c

Reported-and-tested-by: George Moutsopoulos 
Signed-off-by: Ulrik De Bie 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Jiri Slaby

Input: elantech - add more Fujtisu notebooks to force crc_enabled

2015-04-27T18:38:20+00:00

commit 47c1ffb2b6b630894e9a16442611c056ab21c057 upstream.

Add two more Fujitsu LIFEBOOK models that also ship with the Elantech
touchpad and don't work with crc_disabled to the quirk list.

Signed-off-by: Rainer Koenig 
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Jiri Slaby