linux-stable.git/drivers/input/mouse, branch v3.12.52 Linux kernel stable tree Input: psmouse - add small delay for IBM trackpoint pass-through mode 2015-10-28T15:38:29+00:00 Stefan Assmann sassmann@kpanic.de 2015-08-26T20:11:49+00:00 666e2269eccc2f1a996b6110040f37d45cb76840 commit 66bc2f51ef7deabc8b8f3baa98ae64b65e5e973a upstream. There are trackpoint devices that fail to respond to the PS2 command PSMOUSE_CMD_GETID if immediately queried after the parent device is deactivated. Add a small delay for the hardware to get in a sane state before sending any PS2 commands. One example of such a system is: Lenovo ThinkPad X120e, model 30515QG synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x121c00, board id: 1811, fw id: 797391 Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Oliver Neukum <ONeukum@suse.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 66bc2f51ef7deabc8b8f3baa98ae64b65e5e973a upstream.

There are trackpoint devices that fail to respond to the PS2 command
PSMOUSE_CMD_GETID if immediately queried after the parent device is
deactivated. Add a small delay for the hardware to get in a sane state
before sending any PS2 commands.

One example of such a system is:
Lenovo ThinkPad X120e, model 30515QG
synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x121c00, board id: 1811, fw id: 797391

Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Oliver Neukum <ONeukum@suse.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Input: elantech - fix detection of touchpads where the revision matches a known rate 2015-06-23T12:55:11+00:00 Hans de Goede hdegoede@redhat.com 2015-06-02T17:40:50+00:00 bc2990ca6c55f98dab00d90d32649bec039ff111 commit 5f0ee9d17aae628b22be86966471db65be21f262 upstream. Make the check to skip the rate check more lax, so that it applies to all hw_version 4 models. This fixes the touchpad not being detected properly on Asus PU551LA laptops. Reported-and-tested-by: David Zafra Gómez <dezeta@klo.es> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 5f0ee9d17aae628b22be86966471db65be21f262 upstream.

Make the check to skip the rate check more lax, so that it applies
to all hw_version 4 models.

This fixes the touchpad not being detected properly on Asus PU551LA
laptops.

Reported-and-tested-by: David Zafra Gómez <dezeta@klo.es>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Input: synaptics - add min/max quirk for Lenovo S540 2015-06-23T12:55:11+00:00 Peter Hutterer peter.hutterer@who-t.net 2015-06-08T17:17:32+00:00 d00b7b6be65c096f65beb829c1b6fd010c026e8b commit 7f2ca8b55aeff1fe51ed3570200ef88a96060917 upstream. https://bugzilla.redhat.com/show_bug.cgi?id=1223051#c2 Tested-by: tommy.gagnes@gmail.com Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 7f2ca8b55aeff1fe51ed3570200ef88a96060917 upstream.

https://bugzilla.redhat.com/show_bug.cgi?id=1223051#c2

Tested-by: tommy.gagnes@gmail.com
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Input: elantech - fix semi-mt protocol for v3 HW 2015-06-03T09:33:14+00:00 Benjamin Tissoires benjamin.tissoires@redhat.com 2015-04-23T16:08:43+00:00 46ea90bbae1e7ead36a867dfefcbb1988d305861 commit 3c0213d17a09601e0c6c0ae0e27caf70d988290f upstream. When the v3 hardware sees more than one finger, it uses the semi-mt protocol to report the touches. However, it currently works when num_fingers is 0, 1 or 2, but when it is 3 and above, it sends only 1 finger as if num_fingers was 1. This confuses userspace which knows how to deal with extra fingers when all the slots are used, but not when some are missing. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=90101 Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 3c0213d17a09601e0c6c0ae0e27caf70d988290f upstream.

When the v3 hardware sees more than one finger, it uses the semi-mt
protocol to report the touches. However, it currently works when
num_fingers is 0, 1 or 2, but when it is 3 and above, it sends only 1
finger as if num_fingers was 1.

This confuses userspace which knows how to deal with extra fingers
when all the slots are used, but not when some are missing.

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=90101

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Input: elantech - fix absolute mode setting on some ASUS laptops 2015-05-04T09:50:01+00:00 Ulrik De Bie ulrik.debie-os@e2big.org 2015-04-06T22:35:38+00:00 40236427a828dd93a0dda9652063fb969a42aabd commit bd884149aca61de269fd9bad83fe2a4232ffab21 upstream. On ASUS TP500LN and X750JN, the touchpad absolute mode is reset each time set_rate is done. In order to fix this, we will verify the firmware version, and if it matches the one in those laptops, the set_rate function is overloaded with a function elantech_set_rate_restore_reg_07 that performs the set_rate with the original function, followed by a restore of reg_07 (the register that sets the absolute mode on elantech v4 hardware). Also the ASUS TP500LN and X750JN firmware version, capabilities, and button constellation is added to elantech.c Reported-and-tested-by: George Moutsopoulos <gmoutso@yahoo.co.uk> Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit bd884149aca61de269fd9bad83fe2a4232ffab21 upstream.

On ASUS TP500LN and X750JN, the touchpad absolute mode is reset each
time set_rate is done.

In order to fix this, we will verify the firmware version, and if it
matches the one in those laptops, the set_rate function is overloaded
with a function elantech_set_rate_restore_reg_07 that performs the
set_rate with the original function, followed by a restore of reg_07
(the register that sets the absolute mode on elantech v4 hardware).

Also the ASUS TP500LN and X750JN firmware version, capabilities, and
button constellation is added to elantech.c

Reported-and-tested-by: George Moutsopoulos <gmoutso@yahoo.co.uk>
Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Input: elantech - add more Fujtisu notebooks to force crc_enabled 2015-04-27T18:38:20+00:00 Rainer Koenig Rainer.Koenig@ts.fujitsu.com 2015-01-27T23:15:11+00:00 7f41838fc37fefd89dfcb985d37037e1d4cf0180 commit 47c1ffb2b6b630894e9a16442611c056ab21c057 upstream. Add two more Fujitsu LIFEBOOK models that also ship with the Elantech touchpad and don't work with crc_disabled to the quirk list. Signed-off-by: Rainer Koenig <Rainer.Koenig@ts.fujitsu.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 47c1ffb2b6b630894e9a16442611c056ab21c057 upstream.

Add two more Fujitsu LIFEBOOK models that also ship with the Elantech
touchpad and don't work with crc_disabled to the quirk list.

Signed-off-by: Rainer Koenig <Rainer.Koenig@ts.fujitsu.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Input: elantech - fix crc_enabled for Fujitsu H730 2015-04-27T18:38:19+00:00 Ulrik De Bie ulrik.debie-os@e2big.org 2014-11-08T07:57:34+00:00 072321081349db237dc23700224ade2b5e43b805 commit 0dc1587905a50f8f61bbc29e850aa592821e4bea upstream. The Fujitsu H730 does not work with crc_enabled = 0, even though the crc_enabled bit in the firmware version indicated it would. When switching this value to crc_enabled to 1, the touchpad works. This patch uses DMI to detect H730. Reported-by: Stefan Valouch <stefan@valouch.com> Tested-by: Stefan Valouch <stefan@valouch.com> Tested-by: Alfredo Gemma <alfredo.gemma@gmail.com> Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 0dc1587905a50f8f61bbc29e850aa592821e4bea upstream.

The Fujitsu H730 does not work with crc_enabled = 0, even though the
crc_enabled bit in the firmware version indicated it would. When switching
this value to crc_enabled to 1, the touchpad works. This patch uses DMI to
detect H730.

Reported-by: Stefan Valouch <stefan@valouch.com>
Tested-by: Stefan Valouch <stefan@valouch.com>
Tested-by: Alfredo Gemma <alfredo.gemma@gmail.com>
Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Input: synaptics - adjust min/max for Lenovo ThinkPad X1 Carbon 2nd 2015-02-08T19:01:57+00:00 Peter Hutterer peter.hutterer@who-t.net 2015-01-20T00:29:25+00:00 cc356228c40a7d3979f6047fff9cf71ff40dad71 commit 8543cf1c247909ce85850ca6e2714adba351d6aa upstream. LEN0037 found in the Lenovo ThinkPad X1 Carbon 2nd (2014 model) Reported-and-tested-by: Bjoern Olausson <bjoern@olausson.de> Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 8543cf1c247909ce85850ca6e2714adba351d6aa upstream.

LEN0037 found in the Lenovo ThinkPad X1 Carbon 2nd (2014 model)

Reported-and-tested-by: Bjoern Olausson <bjoern@olausson.de>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Input: synaptics - adjust min/max on Thinkpad E540 2014-12-06T14:18:21+00:00 Ben Sagal bensagal@gmail.com 2014-11-17T01:23:40+00:00 2c2bbb8a720934e493feb6dc52dd84bb04e60562 commit bce4f9e764c36bc35dd5c9cf9e057c09f422397d upstream. The LEN2006 Synaptics touchpad (as found in Thinkpad E540) returns wrong min max values. touchpad-edge-detector output: > Touchpad SynPS/2 Synaptics TouchPad on /dev/input/event6 > Move one finger around the touchpad to detect the actual edges > Kernel says: x [1472..5674], y [1408..4684] > Touchpad sends: x [1264..5675], y [1171..4688] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88211 Signed-off-by: Binyamin Sagal <bensagal@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit bce4f9e764c36bc35dd5c9cf9e057c09f422397d upstream.

The LEN2006 Synaptics touchpad (as found in Thinkpad E540) returns wrong
min max values.

touchpad-edge-detector output:
>  Touchpad SynPS/2 Synaptics TouchPad on /dev/input/event6
>  Move one finger around the touchpad to detect the actual edges
>  Kernel says:    x [1472..5674], y [1408..4684]
>  Touchpad sends: x [1264..5675], y [1171..4688]

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88211
Signed-off-by: Binyamin Sagal <bensagal@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Input: synaptics - add min/max quirk for Lenovo T440s 2014-12-06T14:02:57+00:00 Takashi Iwai tiwai@suse.de 2014-11-06T17:27:11+00:00 c5ddd2b1c74f81410950298b964bbb9c588f5aa6 commit e4742b1e786ca386e88e6cfb2801e14e15e365cd upstream. The new Lenovo T440s laptop has a different PnP ID "LEN0039", and it needs the similar min/max quirk to make its clickpad working. BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=903748 Reported-and-tested-by: Joschi Brauchle <joschibrauchle@gmx.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit e4742b1e786ca386e88e6cfb2801e14e15e365cd upstream.

The new Lenovo T440s laptop has a different PnP ID "LEN0039", and it
needs the similar min/max quirk to make its clickpad working.

BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=903748
Reported-and-tested-by: Joschi Brauchle <joschibrauchle@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>