linux-stable.git/drivers/input/misc, branch v4.14.331 Linux kernel stable tree Input: powermate - fix use-after-free in powermate_config_complete 2023-10-25T09:13:30+00:00 Javier Carrasco javier.carrasco.cruz@gmail.com 2023-10-14T03:11:33+00:00 8677575c4f39d65bf0d719b5d20e8042e550ccb9 commit 5c15c60e7be615f05a45cd905093a54b11f461bc upstream. syzbot has found a use-after-free bug [1] in the powermate driver. This happens when the device is disconnected, which leads to a memory free from the powermate_device struct. When an asynchronous control message completes after the kfree and its callback is invoked, the lock does not exist anymore and hence the bug. Use usb_kill_urb() on pm->config to cancel any in-progress requests upon device disconnection. [1] https://syzkaller.appspot.com/bug?extid=0434ac83f907a1dbdd1e Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Reported-by: syzbot+0434ac83f907a1dbdd1e@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20230916-topic-powermate_use_after_free-v3-1-64412b81a7a2@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5c15c60e7be615f05a45cd905093a54b11f461bc upstream.

syzbot has found a use-after-free bug [1] in the powermate driver. This
happens when the device is disconnected, which leads to a memory free from
the powermate_device struct.  When an asynchronous control message
completes after the kfree and its callback is invoked, the lock does not
exist anymore and hence the bug.

Use usb_kill_urb() on pm->config to cancel any in-progress requests upon
device disconnection.

[1] https://syzkaller.appspot.com/bug?extid=0434ac83f907a1dbdd1e

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reported-by: syzbot+0434ac83f907a1dbdd1e@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20230916-topic-powermate_use_after_free-v3-1-64412b81a7a2@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: adxl34x - do not hardcode interrupt trigger type 2023-08-11T09:33:36+00:00 Marek Vasut marex@denx.de 2023-05-11T00:27:55+00:00 89d454d5f4c22836330bba546b41defac5cd894d [ Upstream commit e96220bce5176ed2309f77f061dcc0430b82b25e ] Instead of hardcoding IRQ trigger type to IRQF_TRIGGER_HIGH, let's respect the settings specified in the firmware description. Fixes: e27c729219ad ("Input: add driver for ADXL345/346 Digital Accelerometers") Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Link: https://lore.kernel.org/r/20230509203555.549158-1-marex@denx.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e96220bce5176ed2309f77f061dcc0430b82b25e ]

Instead of hardcoding IRQ trigger type to IRQF_TRIGGER_HIGH, let's
respect the settings specified in the firmware description.

Fixes: e27c729219ad ("Input: add driver for ADXL345/346 Digital Accelerometers")
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Link: https://lore.kernel.org/r/20230509203555.549158-1-marex@denx.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Input: drv260x - sleep between polling GO bit 2023-08-11T09:33:36+00:00 Luca Weiss luca@z3ntu.xyz 2023-05-02T00:01:45+00:00 6939d5a953605039d2ceb85ab59684abb2015d19 [ Upstream commit efef661dfa6bf8cbafe4cd6a97433fcef0118967 ] When doing the initial startup there's no need to poll without any delay and spam the I2C bus. Let's sleep 15ms between each attempt, which is the same time as used in the vendor driver. Fixes: 7132fe4f5687 ("Input: drv260x - add TI drv260x haptics driver") Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Link: https://lore.kernel.org/r/20230430-drv260x-improvements-v1-2-1fb28b4cc698@z3ntu.xyz Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit efef661dfa6bf8cbafe4cd6a97433fcef0118967 ]

When doing the initial startup there's no need to poll without any
delay and spam the I2C bus.

Let's sleep 15ms between each attempt, which is the same time as used
in the vendor driver.

Fixes: 7132fe4f5687 ("Input: drv260x - add TI drv260x haptics driver")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20230430-drv260x-improvements-v1-2-1fb28b4cc698@z3ntu.xyz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Input: rk805-pwrkey - fix module autoloading 2022-09-15T10:23:50+00:00 Peter Robinson pbrobinson@gmail.com 2022-08-22T23:33:18+00:00 40d8aaa4b9e8dd7ad4bcf245ad419258010b6ea3 [ Upstream commit 99077ad668ddd9b4823cc8ce3f3c7a3fc56f6fd9 ] Add the module alias so the rk805-pwrkey driver will autoload when built as a module. Fixes: 5a35b85c2d92 ("Input: add power key driver for Rockchip RK805 PMIC") Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/r/20220612225437.3628788-1-pbrobinson@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 99077ad668ddd9b4823cc8ce3f3c7a3fc56f6fd9 ]

Add the module alias so the rk805-pwrkey driver will
autoload when built as a module.

Fixes: 5a35b85c2d92 ("Input: add power key driver for Rockchip RK805 PMIC")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20220612225437.3628788-1-pbrobinson@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Input: sparcspkr - fix refcount leak in bbc_beep_probe 2022-06-14T14:53:51+00:00 Miaoqian Lin linmq006@gmail.com 2022-05-16T21:55:55+00:00 f13064b0f2c651a3fbb0749932795c6fd21556a8 [ Upstream commit c8994b30d71d64d5dcc9bc0edbfdf367171aa96f ] of_find_node_by_path() calls of_find_node_opts_by_path(), which returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak. Fixes: 9c1a5077fdca ("input: Rewrite sparcspkr device probing.") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220516081018.42728-1-linmq006@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit c8994b30d71d64d5dcc9bc0edbfdf367171aa96f ]

of_find_node_by_path() calls of_find_node_opts_by_path(),
which returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.

Fixes: 9c1a5077fdca ("input: Rewrite sparcspkr device probing.")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220516081018.42728-1-linmq006@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Input: cm109 - do not stomp on control URB 2020-12-29T12:46:43+00:00 Dmitry Torokhov dmitry.torokhov@gmail.com 2020-12-10T04:13:24+00:00 faed9d0fd9afeb0ff3ccb59d655de4d4ac9a23d0 commit 82e06090473289ce63e23fdeb8737aad59b10645 upstream. We need to make sure we are not stomping on the control URB that was issued when opening the device when attempting to toggle buzzer. To do that we need to mark it as pending in cm109_open(). Reported-and-tested-by: syzbot+150f793ac5bc18eee150@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 82e06090473289ce63e23fdeb8737aad59b10645 upstream.

We need to make sure we are not stomping on the control URB that was
issued when opening the device when attempting to toggle buzzer.
To do that we need to mark it as pending in cm109_open().

Reported-and-tested-by: syzbot+150f793ac5bc18eee150@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: adxl34x - clean up a data type in adxl34x_probe() 2020-11-24T12:05:44+00:00 Dan Carpenter dan.carpenter@oracle.com 2020-10-27T00:10:09+00:00 3df6cf35ef16c00a1623670c010f71dc7a491afb [ Upstream commit 33b6c39e747c552fa770eecebd1776f1f4a222b1 ] The "revid" is used to store negative error codes so it should be an int type. Fixes: e27c729219ad ("Input: add driver for ADXL345/346 Digital Accelerometers") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Link: https://lore.kernel.org/r/20201026072824.GA1620546@mwanda Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 33b6c39e747c552fa770eecebd1776f1f4a222b1 ]

The "revid" is used to store negative error codes so it should be an int
type.

Fixes: e27c729219ad ("Input: add driver for ADXL345/346 Digital Accelerometers")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Link: https://lore.kernel.org/r/20201026072824.GA1620546@mwanda
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Input: pm8xxx-vib - fix handling of separate enable register 2020-01-29T14:02:38+00:00 Stephan Gerhold stephan@gerhold.net 2020-01-17T21:40:36+00:00 1130377fb5a8095a13c23018edadbabbec7f7fef commit 996d5d5f89a558a3608a46e73ccd1b99f1b1d058 upstream. Setting the vibrator enable_mask is not implemented correctly: For regmap_update_bits(map, reg, mask, val) we give in either regs->enable_mask or 0 (= no-op) as mask and "val" as value. But "val" actually refers to the vibrator voltage control register, which has nothing to do with the enable_mask. So we usually end up doing nothing when we really wanted to enable the vibrator. We want to set or clear the enable_mask (to enable/disable the vibrator). Therefore, change the call to always modify the enable_mask and set the bits only if we want to enable the vibrator. Fixes: d4c7c5c96c92 ("Input: pm8xxx-vib - handle separate enable register") Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20200114183442.45720-1-stephan@gerhold.net Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 996d5d5f89a558a3608a46e73ccd1b99f1b1d058 upstream.

Setting the vibrator enable_mask is not implemented correctly:

For regmap_update_bits(map, reg, mask, val) we give in either
regs->enable_mask or 0 (= no-op) as mask and "val" as value.
But "val" actually refers to the vibrator voltage control register,
which has nothing to do with the enable_mask.

So we usually end up doing nothing when we really wanted
to enable the vibrator.

We want to set or clear the enable_mask (to enable/disable the vibrator).
Therefore, change the call to always modify the enable_mask
and set the bits only if we want to enable the vibrator.

Fixes: d4c7c5c96c92 ("Input: pm8xxx-vib - handle separate enable register")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200114183442.45720-1-stephan@gerhold.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: keyspan-remote - fix control-message timeouts 2020-01-29T14:02:37+00:00 Johan Hovold johan@kernel.org 2020-01-13T18:38:57+00:00 68c538b4a1cb84906fbcbffc62d4d6064ec8c9f8 commit ba9a103f40fc4a3ec7558ec9b0b97d4f92034249 upstream. The driver was issuing synchronous uninterruptible control requests without using a timeout. This could lead to the driver hanging on probe due to a malfunctioning (or malicious) device until the device is physically disconnected. While sleeping in probe the driver prevents other devices connected to the same hub from being added to (or removed from) the bus. The USB upper limit of five seconds per request should be more than enough. Fixes: 99f83c9c9ac9 ("[PATCH] USB: add driver for Keyspan Digital Remote") Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable <stable@vger.kernel.org> # 2.6.13 Link: https://lore.kernel.org/r/20200113171715.30621-1-johan@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ba9a103f40fc4a3ec7558ec9b0b97d4f92034249 upstream.

The driver was issuing synchronous uninterruptible control requests
without using a timeout. This could lead to the driver hanging on probe
due to a malfunctioning (or malicious) device until the device is
physically disconnected. While sleeping in probe the driver prevents
other devices connected to the same hub from being added to (or removed
from) the bus.

The USB upper limit of five seconds per request should be more than
enough.

Fixes: 99f83c9c9ac9 ("[PATCH] USB: add driver for Keyspan Digital Remote")
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable <stable@vger.kernel.org>     # 2.6.13
Link: https://lore.kernel.org/r/20200113171715.30621-1-johan@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: da9063 - fix capability and drop KEY_SLEEP 2019-10-29T08:17:33+00:00 Marco Felsch m.felsch@pengutronix.de 2019-09-16T19:45:48+00:00 1c725772e6f23698d3ee414637a3426e752bbd20 commit afce285b859cea91c182015fc9858ea58c26cd0e upstream. Since commit f889beaaab1c ("Input: da9063 - report KEY_POWER instead of KEY_SLEEP during power key-press") KEY_SLEEP isn't supported anymore. This caused input device to not generate any events if "dlg,disable-key-power" is set. Fix this by unconditionally setting KEY_POWER capability, and not declaring KEY_SLEEP. Fixes: f889beaaab1c ("Input: da9063 - report KEY_POWER instead of KEY_SLEEP during power key-press") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit afce285b859cea91c182015fc9858ea58c26cd0e upstream.

Since commit f889beaaab1c ("Input: da9063 - report KEY_POWER instead of
KEY_SLEEP during power key-press") KEY_SLEEP isn't supported anymore. This
caused input device to not generate any events if "dlg,disable-key-power"
is set.

Fix this by unconditionally setting KEY_POWER capability, and not
declaring KEY_SLEEP.

Fixes: f889beaaab1c ("Input: da9063 - report KEY_POWER instead of KEY_SLEEP during power key-press")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>