linux-stable.git/drivers/input/misc, branch v3.2.86

Input: pwm-beeper - fix - scheduling while atomic

2016-08-22T21:37:12+00:00

commit f49cf3b8b4c841457244c461c66186a719e13bcc upstream.

Pwm config may sleep so defer it using a worker.

On a Freescale i.MX53 based board we ran into "BUG: scheduling while
atomic" because input_inject_event locks interrupts, but
imx_pwm_config_v2 sleeps.

Tested on Freescale i.MX53 SoC with 4.6.0.

Signed-off-by: Manfred Schlaegl 
Signed-off-by: Dmitry Torokhov 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

Input: pwm-beeper - remove useless call to pwm_config()

2016-08-22T21:37:12+00:00

commit d1b12075ffa808dce33dd46b7ad035bebf8da215 upstream.

Calling pwm_config() with a period equal to zero always results in
error (-EINVAL) and pwm chip config method is never called.

Signed-off-by: Olivier Sobrie 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Ben Hutchings

Input: uinput - handle compat ioctl for UI_SET_PHYS

2016-08-22T21:37:12+00:00

commit affa80bd97f7ca282d1faa91667b3ee9e4c590e6 upstream.

When running a 32-bit userspace on a 64-bit kernel, the UI_SET_PHYS
ioctl needs to be treated with special care, as it has the pointer
size encoded in the command.

Signed-off-by: Ricky Liang 
Signed-off-by: Dmitry Torokhov 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

Input: pmic8xxx-pwrkey - fix algorithm for converting trigger delay

2016-06-15T20:28:12+00:00

commit eda5ecc0a6b865561997e177c393f0b0136fe3b7 upstream.

The trigger delay algorithm that converts from microseconds to
the register value looks incorrect. According to most of the PMIC
documentation, the equation is

	delay (Seconds) = (1 / 1024) * 2 ^ (x + 4)

except for one case where the documentation looks to have a
formatting issue and the equation looks like

	delay (Seconds) = (1 / 1024) * 2 x + 4

Most likely this driver was written with the improper
documentation to begin with. According to the downstream sources
the valid delays are from 2 seconds to 1/64 second, and the
latter equation just doesn't make sense for that. Let's fix the
algorithm and the range check to match the documentation and the
downstream sources.

Reported-by: Bjorn Andersson 
Fixes: 92d57a73e410 ("input: Add support for Qualcomm PMIC8XXX power key")
Signed-off-by: Stephen Boyd 
Tested-by: John Stultz 
Acked-by: Bjorn Andersson 
Signed-off-by: Dmitry Torokhov 
[bwh: Backported to 3.2: use pdata->kpd_trigger_delay_us not kpd_delay]
Signed-off-by: Ben Hutchings

Input: ati_remote2 - fix crashes on detecting device with invalid descriptor

2016-04-30T22:05:21+00:00

commit 950336ba3e4a1ffd2ca60d29f6ef386dd2c7351d upstream.

The ati_remote2 driver expects at least two interfaces with one
endpoint each. If given malicious descriptor that specify one
interface or no endpoints, it will crash in the probe function.
Ensure there is at least two interfaces and one endpoint for each
interface before using it.

The full disclosure: http://seclists.org/bugtraq/2016/Mar/90

Reported-by: Ralf Spenneberg 
Signed-off-by: Vladis Dronov 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Ben Hutchings

Input: powermate - fix oops with malicious USB descriptors

2016-04-30T22:05:18+00:00

commit 9c6ba456711687b794dcf285856fc14e2c76074f upstream.

The powermate driver expects at least one valid USB endpoint in its
probe function.  If given malicious descriptors that specify 0 for
the number of endpoints, it will crash.  Validate the number of
endpoints on the interface before using them.

The full report for this issue can be found here:
http://seclists.org/bugtraq/2016/Mar/85

Reported-by: Ralf Spenneberg 
Signed-off-by: Josh Boyer 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Ben Hutchings

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2011-12-19T23:11:12+00:00

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: synaptics - fix touchpad not working after S2R on Vostro V13
  Input: cma3000_d0x - fix signedness bug in cma3000_thread_irq()
  Input: wacom - add product id used by Samsung Slate 7

Input: cma3000_d0x - fix signedness bug in cma3000_thread_irq()

2011-12-12T08:01:02+00:00

The error check (intr_status < 0) didn't work because intr_status is
a u8.  Change its type to signed int.

Signed-off-by: Xi Wang 
Signed-off-by: Dmitry Torokhov

Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux

2011-11-07T03:44:47+00:00

* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
  Revert "tracing: Include module.h in define_trace.h"
  irq: don't put module.h into irq.h for tracking irqgen modules.
  bluetooth: macroize two small inlines to avoid module.h
  ip_vs.h: fix implicit use of module_get/module_put from module.h
  nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
  include: replace linux/module.h with "struct module" wherever possible
  include: convert various register fcns to macros to avoid include chaining
  crypto.h: remove unused crypto_tfm_alg_modname() inline
  uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
  pm_runtime.h: explicitly requires notifier.h
  linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
  miscdevice.h: fix up implicit use of lists and types
  stop_machine.h: fix implicit use of smp.h for smp_processor_id
  of: fix implicit use of errno.h in include/linux/of.h
  of_platform.h: delete needless include 
  acpi: remove module.h include from platform/aclinux.h
  miscdevice.h: delete unnecessary inclusion of module.h
  device_cgroup.h: delete needless include 
  net: sch_generic remove redundant use of 
  net: inet_timewait_sock doesnt need 
  ...

Fix up trivial conflicts (other header files, and  removal of the ab3550 mfd driver) in
 - drivers/media/dvb/frontends/dibx000_common.c
 - drivers/media/video/{mt9m111.c,ov6650.c}
 - drivers/mfd/ab3550-core.c
 - include/linux/dmaengine.h

Merge branch 'for-next' of git://git.infradead.org/users/sameo/mfd-2.6

2011-11-03T16:40:51+00:00

* 'for-next' of git://git.infradead.org/users/sameo/mfd-2.6: (80 commits)
  mfd: Fix missing abx500 header file updates
  mfd: Add missing  include to intel_msic
  x86, mrst: add platform support for MSIC MFD driver
  mfd: Expose TurnOnStatus in ab8500 sysfs
  mfd: Remove support for early drop ab8500 chip
  mfd: Add support for ab8500 v3.3
  mfd: Add ab8500 interrupt disable hook
  mfd: Convert db8500-prcmu panic() into pr_crit()
  mfd: Refactor db8500-prcmu request_clock() function
  mfd: Rename db8500-prcmu init function
  mfd: Fix db5500-prcmu defines
  mfd: db8500-prcmu voltage domain consumers additions
  mfd: db8500-prcmu reset code retrieval
  mfd: db8500-prcmu tweak for modem wakeup
  mfd: Add db8500-pcmu watchdog accessor functions for watchdog
  mfd: hwacc power state db8500-prcmu accessor
  mfd: Add db8500-prcmu accessors for PLL and SGA clock
  mfd: Move to the new db500 PRCMU API
  mfd: Create a common interface for dbx500 PRCMU drivers
  mfd: Initialize DB8500 PRCMU regs
  ...

Fix up trivial conflicts in
	arch/arm/mach-imx/mach-mx31moboard.c
	arch/arm/mach-omap2/board-omap3beagle.c
	arch/arm/mach-u300/include/mach/irqs.h
	drivers/mfd/wm831x-spi.c