linux-stable.git/drivers/input/misc, branch linux-6.4.y

Input: pm8941-powerkey - fix debounce on gen2+ PMICs

2023-07-19T14:35:57+00:00

[ Upstream commit 8c9cce9cb81b5fdc6e66bf3f129727b89e8daab7 ]

Since PM8998/PM660, the power key debounce register was redefined to
support shorter debounce times. On PM8941 the shortest debounce time
(represented by register value 0) was 15625us, on PM8998 the shortest
debounce time is 62us, with the default being 2ms.

Adjust the bit shift to correctly program debounce on PM8998 and newer.

Fixes: 68c581d5e7d8 ("Input: add Qualcomm PM8941 power key driver")
Signed-off-by: Caleb Connolly 
Link: https://lore.kernel.org/r/20230529-pm8941-pwrkey-debounce-v1-2-c043a6d5c814@linaro.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: adxl34x - do not hardcode interrupt trigger type

2023-07-19T14:35:42+00:00

[ Upstream commit e96220bce5176ed2309f77f061dcc0430b82b25e ]

Instead of hardcoding IRQ trigger type to IRQF_TRIGGER_HIGH, let's
respect the settings specified in the firmware description.

Fixes: e27c729219ad ("Input: add driver for ADXL345/346 Digital Accelerometers")
Signed-off-by: Marek Vasut 
Acked-by: Michael Hennerich 
Link: https://lore.kernel.org/r/20230509203555.549158-1-marex@denx.de
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: drv260x - sleep between polling GO bit

2023-07-19T14:35:39+00:00

[ Upstream commit efef661dfa6bf8cbafe4cd6a97433fcef0118967 ]

When doing the initial startup there's no need to poll without any
delay and spam the I2C bus.

Let's sleep 15ms between each attempt, which is the same time as used
in the vendor driver.

Fixes: 7132fe4f5687 ("Input: drv260x - add TI drv260x haptics driver")
Signed-off-by: Luca Weiss 
Link: https://lore.kernel.org/r/20230430-drv260x-improvements-v1-2-1fb28b4cc698@z3ntu.xyz
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: soc_button_array - add invalid acpi_index DMI quirk handling

2023-05-11T19:06:58+00:00

Some devices have a wrong entry in their button array which points to
a GPIO which is required in another driver, so soc_button_array must
not claim it.

A specific example of this is the Lenovo Yoga Book X90F / X90L,
where the PNP0C40 home button entry points to a GPIO which is not
a home button and which is required by the lenovo-yogabook driver.

Add a DMI quirk table which can specify an ACPI GPIO resource index which
should be skipped; and add an entry for the Lenovo Yoga Book X90F / X90L
to this new DMI quirk table.

Signed-off-by: Hans de Goede 
Link: https://lore.kernel.org/r/20230414072116.4497-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov

Input: cma3000_d0x - remove unneeded code

2023-04-10T02:18:39+00:00

Function input_set_abs_params() has already set EV_ABS bit for us.

drivers/input/misc/cma3000_d0x.c:328 cma3000_init() warn: inconsistent indenting.

Reported-by: Abaci Robot 
Signed-off-by: Jiapeng Chong 
Link: https://lore.kernel.org/r/20230407021343.63512-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Dmitry Torokhov

Merge tag 'v6.3-rc2' into next

2023-03-17T11:01:30+00:00

Merge with mainline to get of_property_present() and other newer APIs.

Merge tag 'input-for-v6.3-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2023-02-25T23:01:32+00:00

Pull input updates from Dmitry Torokhov:

 - a set of tweaks to iqs269a touch controller driver

 - a fix for ads7846 driver to properly handle 7845 chip

 - cap11xx driver will support cap1203, cap1293 and cap1298 models

 - xpad driver will support 8BitDo Pro 2 Wired Controller

 - input drivers have been switched to DEFINE_SIMPLE_DEV_PM_OPS() and
   pm_sleep_ptr()

 - other miscellaneous fixes and tweaks

* tag 'input-for-v6.3-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (113 commits)
  dt-bindings: input: iqs626a: Redefine trackpad property types
  Input: iqs626a - drop unused device node references
  dt-bindings: input: touchscreen: st,stmfts: convert to dtschema
  Input: cyttsp5 - fix bitmask for touch buttons
  Input: exc3000 - properly stop timer on shutdown
  Input: synaptics-rmi4 - fix SPI device ID
  Input: cap11xx - add support for cap1203, cap1293 and cap1298
  dt-bindings: input: microchip,cap11xx: add cap1203, cap1293 and cap1298
  Input: pmic8xxx-keypad - fix a Kconfig spelling mistake & hyphenation
  Input: edt-ft5x06 - fix typo in a comment
  Input: tegra-kbc - use devm_platform_get_and_ioremap_resource()
  Input: st-keyscan - use devm_platform_get_and_ioremap_resource()
  Input: spear-keyboard - use devm_platform_get_and_ioremap_resource()
  Input: olpc_apsp - use devm_platform_get_and_ioremap_resource()
  Input: arc_ps2 - use devm_platform_get_and_ioremap_resource()
  Input: apbps2 - use devm_platform_get_and_ioremap_resource()
  Input: altera_ps2 - use devm_platform_get_and_ioremap_resource()
  Input: ads7846 - don't check penirq immediately for 7845
  Input: ads7846 - always set last command to PWRDOWN
  Input: ads7846 - don't report pressure for ads7845
  ...

Input: hp_sdc_rtc - mark an unused function as __maybe_unused

2023-02-21T21:57:40+00:00

When CONFIG_PROC_FS is not set, one procfs-related function is not
used, causing a build error or warning.
Mark this function as __maybe_unused to quieten the build.

../drivers/input/misc/hp_sdc_rtc.c:268:12: warning: 'hp_sdc_rtc_proc_show' defined but not used [-Wunused-function]
  268 | static int hp_sdc_rtc_proc_show(struct seq_file *m, void *v)
      |            ^~~~~~~~~~~~~~~~~~~~

Fixes: c18bd9a1ff47 ("hp_sdc_rtc: Don't use create_proc_read_entry()")
Signed-off-by: Randy Dunlap 
Reviewed-by: Geert Uytterhoeven 
Link: https://lore.kernel.org/r/20230209010125.23690-1-rdunlap@infradead.org
Signed-off-by: Dmitry Torokhov

Input: bbnsm_pwrkey - add bbnsm power key support

2023-02-21T21:56:35+00:00

The ON/OFF logic inside the BBNSM allows for connecting directly
into a PMIC or other voltage regulator device. The module has an
button input signal and a wakeup request input signal. It also
has two interrupts (set_pwr_off_irq and set_pwr_on_irq) and an
active-low PMIC enable (pmic_en_b) output.

Add the power key support for the ON/OFF button function found in
BBNSM module.

Signed-off-by: Jacky Bai 
Reviewed-by: Peng Fan 
Link: https://lore.kernel.org/r/20230215024117.3357341-2-ping.bai@nxp.com
Signed-off-by: Dmitry Torokhov

Input: iqs626a - drop unused device node references

2023-02-04T01:21:04+00:00

Each call to device/fwnode_get_named_child_node() must be matched
with a call to fwnode_handle_put() once the corresponding node is
no longer in use. This ensures a reference count remains balanced
in the case of dynamic device tree support.

Currently, the driver never calls fwnode_handle_put(); this patch
adds the missing calls. Because fwnode_handle_put() does not take
a const *fwnode_handle, the const qualifier is removed across all
corresponding *fwnode_handle instances.

As part of this change, trackpad channel touch thresholds and ATI
base values are now specified under single trackpad channel child
nodes. This enhancement moves both properties to scalar values as
opposed to arrays, making their types consistent across bindings.

Fixes: f1d2809de97a ("Input: Add support for Azoteq IQS626A")
Signed-off-by: Jeff LaBundy 
Link: https://lore.kernel.org/r/Y9RQVe/V1Hnw1oly@nixie71
Signed-off-by: Dmitry Torokhov