linux-stable.git/drivers/input/misc, branch linux-5.19.y Linux kernel stable tree Input: rk805-pwrkey - fix module autoloading 2022-09-08T09:24:03+00:00 Peter Robinson pbrobinson@gmail.com 2022-08-22T23:33:18+00:00 dd5ec5416171a55cd3d6fa2c349e3e5d9364b706 [ Upstream commit 99077ad668ddd9b4823cc8ce3f3c7a3fc56f6fd9 ] Add the module alias so the rk805-pwrkey driver will autoload when built as a module. Fixes: 5a35b85c2d92 ("Input: add power key driver for Rockchip RK805 PMIC") Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/r/20220612225437.3628788-1-pbrobinson@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 99077ad668ddd9b4823cc8ce3f3c7a3fc56f6fd9 ]

Add the module alias so the rk805-pwrkey driver will
autoload when built as a module.

Fixes: 5a35b85c2d92 ("Input: add power key driver for Rockchip RK805 PMIC")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20220612225437.3628788-1-pbrobinson@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Input: iqs7222 - remove support for RF filter 2022-08-25T09:45:20+00:00 Jeff LaBundy jeff@labundy.com 2022-06-27T22:15:25+00:00 179331884af66c80db881eea41247b28884bcabb commit 381932cf61d52bde656c8596c0cb8f46bed53dc0 upstream. The vendor has marked the RF filter enable control as reserved in the datasheet; remove it from the driver. Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C") Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20220626072412.475211-7-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 381932cf61d52bde656c8596c0cb8f46bed53dc0 upstream.

The vendor has marked the RF filter enable control as reserved in
the datasheet; remove it from the driver.

Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20220626072412.475211-7-jeff@labundy.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: iqs7222 - handle reset during ATI 2022-08-25T09:45:19+00:00 Jeff LaBundy jeff@labundy.com 2022-06-27T22:15:09+00:00 5384b932e259a621e880076a4e963bc683f03a77 commit 8635c68891c6d786d644747d599c41bdf512fbbf upstream. If the device suffers a spurious reset during ATI, there is no point in enduring any further retries. Instead, simply return successfully from the polling loop. In this case, the interrupt handler will intervene and recognize the device has been reset. It then proceeds to initialize the device and trigger ATI once more. As part of this change, swap the order of status field evaluation to match that of the interrupt handler, and correct a nearby off-by-one error that causes an error message to suggest the final attempt will be retried. Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C") Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20220626072412.475211-6-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8635c68891c6d786d644747d599c41bdf512fbbf upstream.

If the device suffers a spurious reset during ATI, there is no point
in enduring any further retries. Instead, simply return successfully
from the polling loop.

In this case, the interrupt handler will intervene and recognize the
device has been reset. It then proceeds to initialize the device and
trigger ATI once more.

As part of this change, swap the order of status field evaluation to
match that of the interrupt handler, and correct a nearby off-by-one
error that causes an error message to suggest the final attempt will
be retried.

Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20220626072412.475211-6-jeff@labundy.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: iqs7222 - acknowledge reset before writing registers 2022-08-25T09:45:19+00:00 Jeff LaBundy jeff@labundy.com 2022-06-27T22:14:42+00:00 2aa156cbc4bdd824b5de411fb8df506226910f64 commit 2e70ef525b7309287b2d4dd24e7c9c038a006328 upstream. If the device suffers a spurious reset while reacting to a previous spurious reset, the second reset interrupt is preempted because the ACK_RESET bit is written last. To solve this problem, write the ACK_RESET bit prior to writing any other registers. This ensures that any registers written before the second spurious reset will be rewritten. Last but not least, the order in which the ACK_RESET bit is written relative to the second filter beta register is important for select variants of silicon. Enforce the correct order so as to not clobber the system status register. Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C") Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20220626072412.475211-5-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2e70ef525b7309287b2d4dd24e7c9c038a006328 upstream.

If the device suffers a spurious reset while reacting to a previous
spurious reset, the second reset interrupt is preempted because the
ACK_RESET bit is written last.

To solve this problem, write the ACK_RESET bit prior to writing any
other registers. This ensures that any registers written before the
second spurious reset will be rewritten.

Last but not least, the order in which the ACK_RESET bit is written
relative to the second filter beta register is important for select
variants of silicon. Enforce the correct order so as to not clobber
the system status register.

Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20220626072412.475211-5-jeff@labundy.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: iqs7222 - protect volatile registers 2022-08-25T09:45:19+00:00 Jeff LaBundy jeff@labundy.com 2022-06-27T22:14:23+00:00 7d45f72dcb766fe239c4619fc50a2bbc379aafca commit 1e4189d8af2749e2db406f92bdc4abccbab63138 upstream. Select variants of silicon silently mirror part of the event mask register to the system setup register (0xD0), and vice versa. For the following sequence: 1. Read registers 0xD0 onward and store their contents. 2. Modify the contents, including event mask fields. 3. Write registers 0xD0 onward with the modified contents. 4. Write register 0xD0 on its own again later, using the contents from step 1 to populate any reserved fields. ...the event mask register (e.g. address 0xDA) has been corrupted by writing register 0xD0 with contents that were made stale after step 3. To solve this problem, read register 0xD0 once more between steps 3 and 4. When register 0xD0 is written during step 4, the portion which is mirrored to the event mask register already matches what was written in step 3. Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C") Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20220626072412.475211-4-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1e4189d8af2749e2db406f92bdc4abccbab63138 upstream.

Select variants of silicon silently mirror part of the event mask
register to the system setup register (0xD0), and vice versa. For
the following sequence:

1. Read registers 0xD0 onward and store their contents.
2. Modify the contents, including event mask fields.
3. Write registers 0xD0 onward with the modified contents.
4. Write register 0xD0 on its own again later, using the contents
   from step 1 to populate any reserved fields.

...the event mask register (e.g. address 0xDA) has been corrupted
by writing register 0xD0 with contents that were made stale after
step 3.

To solve this problem, read register 0xD0 once more between steps
3 and 4. When register 0xD0 is written during step 4, the portion
which is mirrored to the event mask register already matches what
was written in step 3.

Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20220626072412.475211-4-jeff@labundy.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: iqs7222 - fortify slider event reporting 2022-08-25T09:45:19+00:00 Jeff LaBundy jeff@labundy.com 2022-06-27T22:14:04+00:00 4d5f2539375f8ab6fe066c5621935caaa9ea5340 commit 95215d3d19c5b47b8ccef8cb61c9dcd17ac7a669 upstream. The release cycle of any key mapped to a slider gesture relies upon trailing interrupts generated by other unmasked sources, the timing and presence of which are inconsistent. To solve this problem, explicitly report a release cycle to emulate a full keystroke. Also, unmask touch interrupts if the slider press event is defined; this ensures the device reports a final interrupt with coordinate = 0xFFFF once the finger is lifted. As a result of how the logic has been refactored, the press/release event can now be mapped to a GPIO. This is more convenient than the previous solution, which required each channel within the slider to specify the same GPIO. As part of this change, use the device's resolution rather than its number of interrupt status registers to more safely determine if it is capable of reporting gestures. Last but not least, make the code a bit simpler by eliminating some unnecessarily complex conditional statements and a macro that could be derived using information that is already available. Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C") Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20220626072412.475211-3-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 95215d3d19c5b47b8ccef8cb61c9dcd17ac7a669 upstream.

The release cycle of any key mapped to a slider gesture relies upon
trailing interrupts generated by other unmasked sources, the timing
and presence of which are inconsistent.

To solve this problem, explicitly report a release cycle to emulate
a full keystroke. Also, unmask touch interrupts if the slider press
event is defined; this ensures the device reports a final interrupt
with coordinate = 0xFFFF once the finger is lifted.

As a result of how the logic has been refactored, the press/release
event can now be mapped to a GPIO. This is more convenient than the
previous solution, which required each channel within the slider to
specify the same GPIO.

As part of this change, use the device's resolution rather than its
number of interrupt status registers to more safely determine if it
is capable of reporting gestures.

Last but not least, make the code a bit simpler by eliminating some
unnecessarily complex conditional statements and a macro that could
be derived using information that is already available.

Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20220626072412.475211-3-jeff@labundy.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: iqs7222 - correct slider event disable logic 2022-08-25T09:45:19+00:00 Jeff LaBundy jeff@labundy.com 2022-06-27T22:13:49+00:00 aa7ab02564ba23680991a0b751983a9097608829 commit 56a0c54c4c2bdb6c0952de90dd690020a703b50e upstream. If a positive swipe/flick gesture is defined but the corresponding negative gesture is not, the former is inadvertently disabled. Fix this by gently refactoring the logic responsible for disabling all gestures by default. As part of this change, make the code a bit simpler by eliminating a superfluous conditional check. If a slider event does not define an enable control, the second term of the bitwise AND operation is simply 0xFFFF. Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C") Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20220626072412.475211-2-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 56a0c54c4c2bdb6c0952de90dd690020a703b50e upstream.

If a positive swipe/flick gesture is defined but the corresponding
negative gesture is not, the former is inadvertently disabled. Fix
this by gently refactoring the logic responsible for disabling all
gestures by default.

As part of this change, make the code a bit simpler by eliminating
a superfluous conditional check. If a slider event does not define
an enable control, the second term of the bitwise AND operation is
simply 0xFFFF.

Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20220626072412.475211-2-jeff@labundy.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'input-for-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input 2022-06-07T22:00:29+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-06-07T22:00:29+00:00 9886142c7a2226439c1e3f7d9b69f9c7094c3ef6 Pull input fixes from Dmitry Torokhov: - proper annotation of USB buffers in bcm5974 touchpad dirver - a quirk in SOC button driver to handle Lenovo Yoga Tablet2 1051F - a fix for missing dependency in raspberrypi-ts driver to avoid compile breakages with random configs. * tag 'input-for-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: soc_button_array - also add Lenovo Yoga Tablet2 1051F to dmi_use_low_level_irq Input: bcm5974 - set missing URB_NO_TRANSFER_DMA_MAP urb flag Input: raspberrypi-ts - add missing HAS_IOMEM dependency 
Pull input fixes from Dmitry Torokhov:

 - proper annotation of USB buffers in bcm5974 touchpad dirver

 - a quirk in SOC button driver to handle Lenovo Yoga Tablet2 1051F

 - a fix for missing dependency in raspberrypi-ts driver to avoid
   compile breakages with random configs.

* tag 'input-for-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: soc_button_array - also add Lenovo Yoga Tablet2 1051F to dmi_use_low_level_irq
  Input: bcm5974 - set missing URB_NO_TRANSFER_DMA_MAP urb flag
  Input: raspberrypi-ts - add missing HAS_IOMEM dependency
Input: soc_button_array - also add Lenovo Yoga Tablet2 1051F to dmi_use_low_level_irq 2022-06-07T20:44:41+00:00 Marius Hoch mail@mariushoch.de 2022-06-07T19:10:52+00:00 6ab2e51898cd4343bbdf8587af8ce8fbabddbcb5 Commit 223f61b8c5ad ("Input: soc_button_array - add Lenovo Yoga Tablet2 1051L to the dmi_use_low_level_irq list") added the 1051L to this list already, but the same problem applies to the 1051F. As there are no further 1051 variants (just the F/L), we can just DMI match 1051. Tested on a Lenovo Yoga Tablet2 1051F: Without this patch the home-button stops working after a wakeup from suspend. Signed-off-by: Marius Hoch <mail@mariushoch.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220603120246.3065-1-mail@mariushoch.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
Commit 223f61b8c5ad ("Input: soc_button_array - add Lenovo Yoga Tablet2
1051L to the dmi_use_low_level_irq list") added the 1051L to this list
already, but the same problem applies to the 1051F. As there are no
further 1051 variants (just the F/L), we can just DMI match 1051.

Tested on a Lenovo Yoga Tablet2 1051F: Without this patch the
home-button stops working after a wakeup from suspend.

Signed-off-by: Marius Hoch <mail@mariushoch.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220603120246.3065-1-mail@mariushoch.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Merge tag 'for-linus-5.19-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip 2022-06-04T20:42:53+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-06-04T20:42:53+00:00 4ccbe91de91a8f9559052179d15c0229a8ac9f8a Pull more xen updates from Juergen Gross: "Two cleanup patches for Xen related code and (more important) an update of MAINTAINERS for Xen, as Boris Ostrovsky decided to step down" * tag 'for-linus-5.19-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: replace xen_remap() with memremap() MAINTAINERS: Update Xen maintainership xen: switch gnttab_end_foreign_access() to take a struct page pointer 
Pull more xen updates from Juergen Gross:
 "Two cleanup patches for Xen related code and (more important) an
  update of MAINTAINERS for Xen, as Boris Ostrovsky decided to step
  down"

* tag 'for-linus-5.19-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: replace xen_remap() with memremap()
  MAINTAINERS: Update Xen maintainership
  xen: switch gnttab_end_foreign_access() to take a struct page pointer