Pull input fixes from Dmitry Torokhov:

 - Synaptics touchpad on multiple laptops (Dynabook Portege X30L-G,
   Dynabook Portege X30-D, TUXEDO InfinityBook Pro 14 v5, Dell Precision
   M3800, HP Elitebook 850 G1) switched from PS/2 to SMBus mode

 - a number of new controllers added to xpad driver: HORI Drum
   controller, PowerA Fusion Pro 4, PowerA MOGA XP-Ultra controller,
   8BitDo Ultimate 2 Wireless Controller, 8BitDo Ultimate 3-mode
   Controller, Hyperkin DuchesS Xbox One controller

 - fixes to xpad driver to properly handle Mad Catz JOYTECH NEO SE
   Advanced and PDP Mirror's Edge Official controllers

 - fixes to xpad driver to properly handle "Share" button on some
   controllers

 - a fix for device initialization timing and for waking up the
   controller in cyttsp5 driver

 - a fix for hisi_powerkey driver to properly wake up from s2idle state

 - other assorted cleanups and fixes

* tag 'input-for-v6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: xpad - fix xpad_device sorting
  Input: xpad - add support for several more controllers
  Input: xpad - fix Share button on Xbox One controllers
  Input: xpad - fix two controller table values
  Input: hisi_powerkey - enable system-wakeup for s2idle
  Input: synaptics - enable InterTouch on Dell Precision M3800
  Input: synaptics - enable InterTouch on TUXEDO InfinityBook Pro 14 v5
  Input: synaptics - enable InterTouch on Dynabook Portege X30L-G
  Input: synaptics - enable InterTouch on Dynabook Portege X30-D
  Input: synaptics - enable SMBus for HP Elitebook 850 G1
  Input: mtk-pmic-keys - fix possible null pointer dereference
  Input: xpad - add support for 8BitDo Ultimate 2 Wireless Controller
  Input: cyttsp5 - fix power control issue on wakeup
  MAINTAINERS: .mailmap: update Mattijs Korpershoek's email address
  dt-bindings: mediatek,mt6779-keypad: Update Mattijs' email address
  Input: stmpe-ts - use module alias instead of device table
  Input: cyttsp5 - ensure minimum reset pulse width
  Input: sparcspkr - avoid unannotated fall-through
  input/joystick: magellan: Mark __nonstring look-up table

In mtk_pmic_keys_probe, the regs parameter is only set if the button is
parsed in the device tree. However, on hardware where the button is left
floating, that node will most likely be removed not to enable that
input. In that case the code will try to dereference a null pointer.

Let's use the regs struct instead as it is defined for all supported
platforms. Note that it is ok setting the key reg even if that latter is
disabled as the interrupt won't be enabled anyway.

Fixes: b581acb49aec ("Input: mtk-pmic-keys - transfer per-key bit in mtk_pmic_keys_regs")
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull timer cleanups from Thomas Gleixner:
 "A set of final cleanups for the timer subsystem:

   - Convert all del_timer[_sync]() instances over to the new
     timer_delete[_sync]() API and remove the legacy wrappers.

     Conversion was done with coccinelle plus some manual fixups as
     coccinelle chokes on scoped_guard().

   - The final cleanup of the hrtimer_init() to hrtimer_setup()
     conversion.

     This has been delayed to the end of the merge window, so that all
     patches which have been merged through other trees are in mainline
     and all new users are catched.

  Doing this right before rc1 ensures that new code which is merged post
  rc1 is not introducing new instances of the original functionality"

* tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tracing/timers: Rename the hrtimer_init event to hrtimer_setup
  hrtimers: Rename debug_init_on_stack() to debug_setup_on_stack()
  hrtimers: Rename debug_init() to debug_setup()
  hrtimers: Rename __hrtimer_init_sleeper() to __hrtimer_setup_sleeper()
  hrtimers: Remove unnecessary NULL check in hrtimer_start_range_ns()
  hrtimers: Make callback function pointer private
  hrtimers: Merge __hrtimer_init() into __hrtimer_setup()
  hrtimers: Switch to use __htimer_setup()
  hrtimers: Delete hrtimer_init()
  treewide: Convert new and leftover hrtimer_init() users
  treewide: Switch/rename to timer_delete[_sync]()

Pull input updates from Dmitry Torokhov:

 - a brand new driver for touchpads and touchbars in newer Apple devices

 - support for Berlin-A series in goodix-berlin touchscreen driver

 - improvements to matrix_keypad driver to better handle GPIOs toggling

 - assorted small cleanups in other input drivers

* tag 'input-for-v6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: goodix_berlin - add support for Berlin-A series
  dt-bindings: input: goodix,gt9916: Document gt9897 compatible
  dt-bindings: input: matrix_keypad - add wakeup-source property
  dt-bindings: input: matrix_keypad - add missing property
  Input: pm8941-pwrkey - fix dev_dbg() output in pm8941_pwrkey_irq()
  Input: synaptics - hide unused smbus_pnp_ids[] array
  Input: apple_z2 - fix potential confusion in Kconfig
  Input: matrix_keypad - use fsleep for delays after activating columns
  Input: matrix_keypad - add settle time after enabling all columns
  dt-bindings: input: matrix_keypad: add settle time after enabling all columns
  dt-bindings: input: matrix_keypad: convert to YAML
  dt-bindings: input: Correct indentation and style in DTS example
  MAINTAINERS: Add entries for Apple Z2 touchscreen driver
  Input: apple_z2 - add a driver for Apple Z2 touchscreens
  dt-bindings: input: touchscreen: Add Z2 controller
  Input: Switch to use hrtimer_setup()
  Input: drop vb2_ops_wait_prepare/finish

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Coccinelle scripted cleanup.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.

Conversion was done with coccinelle plus manual fixups where necessary.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

The delay is specified in a device property, so the duration can be
arbitrarily large. fsleep() determines the best way of delaying (sleep
vs spin) based on duration.

see Documentation/timers/delay_sleep_functions.rst

Signed-off-by: Markus Burri <markus.burri@mt.com>
Reviewed-by: Manuel Traut <manuel.traut@mt.com>
Link: https://lore.kernel.org/r/20250110054906.354296-2-markus.burri@mt.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Matrix keypads with high capacity need a longer settle time after
enabling all columns before re-enabling interrupts. The delay gives
the system time to settle and avoids spurious interrupts.

Add a new optional device property to configure the delay after
enabling all columns. The default is no delay.

Signed-off-by: Markus Burri <markus.burri@mt.com>
Reviewed-by: Manuel Traut <manuel.traut@mt.com>
Link: https://lore.kernel.org/r/20250110054906.354296-7-markus.burri@mt.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Convert to use devm_kmemdup_array() which is more robust.

Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.

Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.

Patch was created by using Coccinelle.

Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/62db561622799dfc8d58682ca41b54e3f1ff6949.1738746904.git.namcao@linutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>