linux-stable.git/drivers/input/joystick, branch v5.15.78

Input: xpad - fix wireless 360 controller breaking after suspend

2022-10-15T05:59:04+00:00

commit a17b9841152e7f4621619902b347e2cc39c32996 upstream.

Suspending and resuming the system can sometimes cause the out
URB to get hung after a reset_resume. This causes LED setting
and force feedback to break on resume. To avoid this, just drop
the reset_resume callback so the USB core rebinds xpad to the
wireless pads on resume if a reset happened.

A nice side effect of this change is the LED ring on wireless
controllers is now set correctly on system resume.

Cc: stable@vger.kernel.org
Fixes: 4220f7db1e42 ("Input: xpad - workaround dead irq_out after suspend/ resume")
Signed-off-by: Cameron Gutman 
Signed-off-by: Pavel Rojtberg 
Link: https://lore.kernel.org/r/20220818154411.510308-3-rojtberg@gmail.com
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: xpad - add supported devices as contributed on github

2022-10-15T05:59:04+00:00

commit b382c5e37344883dc97525d05f1f6b788f549985 upstream.

This is based on multiple commits at https://github.com/paroj/xpad

Cc: stable@vger.kernel.org
Signed-off-by: Jasper Poppe 
Signed-off-by: Jeremy Palmer 
Signed-off-by: Ruineka 
Signed-off-by: Cleber de Mattos Casali 
Signed-off-by: Kyle Gospodnetich 
Signed-off-by: Pavel Rojtberg 
Link: https://lore.kernel.org/r/20220818154411.510308-2-rojtberg@gmail.com
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: iforce - add support for Boeder Force Feedback Wheel

2022-09-20T10:39:45+00:00

[ Upstream commit 9c9c71168f7979f3798b61c65b4530fbfbcf19d1 ]

Add a new iforce_device entry to support the Boeder Force Feedback Wheel
device.

Signed-off-by: Greg Tulli 
Link: https://lore.kernel.org/r/3256420-c8ac-31b-8499-3c488a9880fd@gmail.com
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Sasha Levin

Input: iforce - wake up after clearing IFORCE_XMIT_RUNNING flag

2022-09-08T10:28:03+00:00

commit 98e01215708b6d416345465c09dce2bd4868c67a upstream.

syzbot is reporting hung task at __input_unregister_device() [1], for
iforce_close() waiting at wait_event_interruptible() with dev->mutex held
is blocking input_disconnect_device() from __input_unregister_device().

It seems that the cause is simply that commit c2b27ef672992a20 ("Input:
iforce - wait for command completion when closing the device") forgot to
call wake_up() after clear_bit().

Fix this problem by introducing a helper that calls clear_bit() followed
by wake_up_all().

Reported-by: syzbot 
Fixes: c2b27ef672992a20 ("Input: iforce - wait for command completion when closing the device")
Tested-by: syzbot 
Suggested-by: Fabio M. De Francesco 
Co-developed-by: Hillf Danton 
Signed-off-by: Hillf Danton 
Signed-off-by: Tetsuo Handa 
Link: https://lore.kernel.org/r/887021c3-4f13-40ce-c8b9-aa6e09faa3a7@I-love.SAKURA.ne.jp
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: spaceball - fix parsing of movement data packets

2022-01-05T11:42:39+00:00

commit bc7ec91718c49d938849697cfad98fcd9877cc26 upstream.

The spaceball.c module was not properly parsing the movement reports
coming from the device.  The code read axis data as signed 16-bit
little-endian values starting at offset 2.

In fact, axis data in Spaceball movement reports are signed 16-bit
big-endian values starting at offset 3.  This was determined first by
visually inspecting the data packets, and later verified by consulting:
http://spacemice.org/pdf/SpaceBall_2003-3003_Protocol.pdf

If this ever worked properly, it was in the time before Git...

Signed-off-by: Leo L. Schwab 
Link: https://lore.kernel.org/r/20211221101630.1146385-1-ewhac@ewhac.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Input: iforce - fix control-message timeout

2021-11-18T18:15:51+00:00

commit 744d0090a5f6dfa4c81b53402ccdf08313100429 upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Fixes: 487358627825 ("Input: iforce - use DMA-safe buffer when getting IDs from USB")
Signed-off-by: Johan Hovold 
Cc: stable@vger.kernel.org      # 5.3
Link: https://lore.kernel.org/r/20211025115501.5190-1-johan@kernel.org
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2021-10-18T02:57:06+00:00

Pull input fixes from Dmitry Torokhov:

 - a new product ID for the xpad joystick driver

 - fixes to resistive-adc-touch and snvs_pwrkey drivers

 - a change to touchscreen helpers to make clang happier

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: touchscreen - avoid bitwise vs logical OR warning
  Input: xpad - add support for another USB ID of Nacon GC-100
  Input: resistive-adc-touch - fix division by zero error on z1 == 0
  Input: snvs_pwrkey - add clk handling

Input: xpad - add support for another USB ID of Nacon GC-100

2021-10-16T05:11:04+00:00

The Nacon GX100XF is already mapped, but it seems there is a Nacon
GC-100 (identified as NC5136Wht PCGC-100WHITE though I believe other
colours exist) with a different USB ID when in XInput mode.

Signed-off-by: Michael Cullen 
Link: https://lore.kernel.org/r/20211015192051.5196-1-michael@michaelcullen.name
Signed-off-by: Dmitry Torokhov

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2021-09-11T16:08:28+00:00

Pull input updates from Dmitry Torokhov:

 - several device tree bindings for input devices have been converted to
   yaml

 - dropped no longer used ixp4xx-beeper and CSR Prima2 PWRC drivers

 - analog joystick has been converted to use ktime API and no longer
   warn about low resolution timers

 - a few driver fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (24 commits)
  Input: analog - always use ktime functions
  Input: mms114 - support MMS134S
  Input: elan_i2c - reduce the resume time for controller in Whitebox
  Input: edt-ft5x06 - added case for EDT EP0110M09
  Input: adc-keys - drop bogus __refdata annotation
  Input: Fix spelling mistake in Kconfig "useable" -> "usable"
  Input: Fix spelling mistake in Kconfig "Modul" -> "Module"
  Input: remove dead CSR Prima2 PWRC driver
  Input: adp5589-keys - use the right header
  Input: adp5588-keys - use the right header
  dt-bindings: input: tsc2005: Convert to YAML schema
  Input: ep93xx_keypad - prepare clock before using it
  dt-bindings: input: sun4i-lradc: Add wakeup-source
  dt-bindings: input: Convert Regulator Haptic binding to a schema
  dt-bindings: input: Convert Pixcir Touchscreen binding to a schema
  dt-bindings: input: Convert ChipOne ICN8318 binding to a schema
  Input: pm8941-pwrkey - fix comma vs semicolon issue
  dt-bindings: power: reset: qcom-pon: Convert qcom PON binding to yaml
  dt-bindings: input: pm8941-pwrkey: Convert pm8941 power key binding to yaml
  dt-bindings: power: reset: Change 'additionalProperties' to true
  ...

Input: analog - always use ktime functions

2021-09-09T06:39:47+00:00

m68k, mips, s390, and sparc allmodconfig images fail to build with the
following error.

drivers/input/joystick/analog.c:160:2: error:
	#warning Precise timer not defined for this architecture.

Remove architecture specific time handling code and always use ktime
functions to determine time deltas. Also remove the now useless use_ktime
kernel parameter.

Signed-off-by: Guenter Roeck 
Reviewed-by: Geert Uytterhoeven 
Acked-by: Randy Dunlap  # build-tested
Link: https://lore.kernel.org/r/20210907123734.21520-1-linux@roeck-us.net
Signed-off-by: Dmitry Torokhov