Pull input fixes from Dmitry Torokhov: "Two small fixups for spaceball joystick driver and appletouch touchpad driver" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: spaceball - fix parsing of movement data packets Input: appletouch - initialize work before device registration
The spaceball.c module was not properly parsing the movement reports coming from the device. The code read axis data as signed 16-bit little-endian values starting at offset 2. In fact, axis data in Spaceball movement reports are signed 16-bit big-endian values starting at offset 3. This was determined first by visually inspecting the data packets, and later verified by consulting: http://spacemice.org/pdf/SpaceBall_2003-3003_Protocol.pdf If this ever worked properly, it was in the time before Git... Signed-off-by: Leo L. Schwab <ewhac@ewhac.org> Link: https://lore.kernel.org/r/20211221101630.1146385-1-ewhac@ewhac.org Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull input updates from Dmitry Torokhov: "Just one new driver (Cypress StreetFighter touchkey), and no input core changes this time. Plus various fixes and enhancements to existing drivers" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (54 commits) Input: iforce - fix control-message timeout Input: wacom_i2c - use macros for the bit masks Input: ili210x - reduce sample period to 15ms Input: ili210x - improve polled sample spacing Input: ili210x - special case ili251x sample read out Input: elantench - fix misreporting trackpoint coordinates Input: synaptics-rmi4 - Fix device hierarchy Input: i8042 - Add quirk for Fujitsu Lifebook T725 Input: cap11xx - add support for cap1206 Input: remove unused header <linux/input/cy8ctmg110_pdata.h> Input: ili210x - add ili251x firmware update support Input: ili210x - export ili251x version details via sysfs Input: ili210x - use resolution from ili251x firmware Input: pm8941-pwrkey - respect reboot_mode for warm reset reboot: export symbol 'reboot_mode' Input: max77693-haptic - drop unneeded MODULE_ALIAS Input: cpcap-pwrbutton - do not set input parent explicitly Input: max8925_onkey - don't mark comment as kernel-doc Input: ads7846 - do not attempt IRQ workaround when deferring probe Input: ads7846 - use input_set_capability() ...
Prepare input updates for 5.16 merge window.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: 487358627825 ("Input: iforce - use DMA-safe buffer when getting IDs from USB")
Signed-off-by: Johan Hovold <johan@kernel.org>
Cc: stable@vger.kernel.org # 5.3
Link: https://lore.kernel.org/r/20211025115501.5190-1-johan@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull input fixes from Dmitry Torokhov: - a new product ID for the xpad joystick driver - fixes to resistive-adc-touch and snvs_pwrkey drivers - a change to touchscreen helpers to make clang happier * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: touchscreen - avoid bitwise vs logical OR warning Input: xpad - add support for another USB ID of Nacon GC-100 Input: resistive-adc-touch - fix division by zero error on z1 == 0 Input: snvs_pwrkey - add clk handling
The Nacon GX100XF is already mapped, but it seems there is a Nacon GC-100 (identified as NC5136Wht PCGC-100WHITE though I believe other colours exist) with a different USB ID when in XInput mode. Signed-off-by: Michael Cullen <michael@michaelcullen.name> Link: https://lore.kernel.org/r/20211015192051.5196-1-michael@michaelcullen.name Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Overlapping input and output arguments to snprintf() are
undefined behavior in C99:
drivers/input/joystick/analog.c: In function 'analog_name':
drivers/input/joystick/analog.c:428:3: error: 'snprintf' argument 4 overlaps destination object 'analog' [-Werror=restrict]
428 | snprintf(analog->name, sizeof(analog->name), "%s %d-hat",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
429 | analog->name, hweight16(analog->mask & ANALOG_HATS_ALL));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/input/joystick/analog.c:420:40: note: destination object referenced by 'restrict'-qualified argument 1 was declared here
420 | static void analog_name(struct analog *analog)
| ~~~~~~~~~~~~~~~^~~~~~
Change this function to use the simpler seq_buf interface instead.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210927101416.1569609-1-arnd@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There is a spelling mistake in the name of a joystick. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210920184748.18519-1-colin.king@canonical.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull input updates from Dmitry Torokhov: - several device tree bindings for input devices have been converted to yaml - dropped no longer used ixp4xx-beeper and CSR Prima2 PWRC drivers - analog joystick has been converted to use ktime API and no longer warn about low resolution timers - a few driver fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (24 commits) Input: analog - always use ktime functions Input: mms114 - support MMS134S Input: elan_i2c - reduce the resume time for controller in Whitebox Input: edt-ft5x06 - added case for EDT EP0110M09 Input: adc-keys - drop bogus __refdata annotation Input: Fix spelling mistake in Kconfig "useable" -> "usable" Input: Fix spelling mistake in Kconfig "Modul" -> "Module" Input: remove dead CSR Prima2 PWRC driver Input: adp5589-keys - use the right header Input: adp5588-keys - use the right header dt-bindings: input: tsc2005: Convert to YAML schema Input: ep93xx_keypad - prepare clock before using it dt-bindings: input: sun4i-lradc: Add wakeup-source dt-bindings: input: Convert Regulator Haptic binding to a schema dt-bindings: input: Convert Pixcir Touchscreen binding to a schema dt-bindings: input: Convert ChipOne ICN8318 binding to a schema Input: pm8941-pwrkey - fix comma vs semicolon issue dt-bindings: power: reset: qcom-pon: Convert qcom PON binding to yaml dt-bindings: input: pm8941-pwrkey: Convert pm8941 power key binding to yaml dt-bindings: power: reset: Change 'additionalProperties' to true ...