Pull iommu updates from Will Deacon:
 "Core:

   - Support for the "ats-supported" device-tree property

   - Removal of the 'ops' field from 'struct iommu_fwspec'

   - Introduction of iommu_paging_domain_alloc() and partial conversion
     of existing users

   - Introduce 'struct iommu_attach_handle' and provide corresponding
     IOMMU interfaces which will be used by the IOMMUFD subsystem

   - Remove stale documentation

   - Add missing MODULE_DESCRIPTION() macro

   - Misc cleanups

  Allwinner Sun50i:

   - Ensure bypass mode is disabled on H616 SoCs

   - Ensure page-tables are allocated below 4GiB for the 32-bit
     page-table walker

   - Add new device-tree compatible strings

  AMD Vi:

   - Use try_cmpxchg64() instead of cmpxchg64() when updating pte

  Arm SMMUv2:

   - Print much more useful information on context faults

   - Fix Qualcomm TBU probing when CONFIG_ARM_SMMU_QCOM_DEBUG=n

   - Add new Qualcomm device-tree bindings

  Arm SMMUv3:

   - Support for hardware update of access/dirty bits and reporting via
     IOMMUFD

   - More driver rework from Jason, this time updating the PASID/SVA
     support to prepare for full IOMMUFD support

   - Add missing MODULE_DESCRIPTION() macro

   - Minor fixes and cleanups

  NVIDIA Tegra:

   - Fix for benign fwspec initialisation issue exposed by rework on the
     core branch

  Intel VT-d:

   - Use try_cmpxchg64() instead of cmpxchg64() when updating pte

   - Use READ_ONCE() to read volatile descriptor status

   - Remove support for handling Execute-Requested requests

   - Avoid calling iommu_domain_alloc()

   - Minor fixes and refactoring

  Qualcomm MSM:

   - Updates to the device-tree bindings"

* tag 'iommu-updates-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (72 commits)
  iommu/tegra-smmu: Pass correct fwnode to iommu_fwspec_init()
  iommu/vt-d: Fix identity map bounds in si_domain_init()
  iommu: Move IOMMU_DIRTY_NO_CLEAR define
  dt-bindings: iommu: Convert msm,iommu-v0 to yaml
  iommu/vt-d: Fix aligned pages in calculate_psi_aligned_address()
  iommu/vt-d: Limit max address mask to MAX_AGAW_PFN_WIDTH
  docs: iommu: Remove outdated Documentation/userspace-api/iommu.rst
  arm64: dts: fvp: Enable PCIe ATS for Base RevC FVP
  iommu/of: Support ats-supported device-tree property
  dt-bindings: PCI: generic: Add ats-supported property
  iommu: Remove iommu_fwspec ops
  OF: Simplify of_iommu_configure()
  ACPI: Retire acpi_iommu_fwspec_ops()
  iommu: Resolve fwspec ops automatically
  iommu/mediatek-v1: Clean up redundant fwspec checks
  RDMA/usnic: Use iommu_paging_domain_alloc()
  wifi: ath11k: Use iommu_paging_domain_alloc()
  wifi: ath10k: Use iommu_paging_domain_alloc()
  drm/msm: Use iommu_paging_domain_alloc()
  vhost-vdpa: Use iommu_paging_domain_alloc()
  ...

Pull rdma updates from Jason Gunthorpe:
 "Usual collection of small improvements and fixes:

   - Bug fixes and minor improvments in efa, irdma, mlx4, mlx5, rxe,
     hf1, qib, ocrdma

   - bnxt_re support for MSN, which is a new retransmit logic

   - Initial mana support for RC qps

   - Use after free bug and cleanups in iwcm

   - Reduce resource usage in mlx5 when RDMA verbs features are not used

   - New verb to drain shared recieve queues, similar to normal recieve
     queues. This is necessary to allow ULPs a clean shutdown. Used in
     the iscsi rdma target

   - mlx5 support for more than 16 bits of doorbell indexes

   - Doorbell moderation support for bnxt_re

   - IB multi-plane support for mlx5

   - New EFA adaptor PCI IDs

   - RDMA_NAME_ASSIGN_TYPE_USER to hint to userspace that it shouldn't
     rename the device

   - A collection of hns bugs

   - Fix long standing bug in bnxt_re with incorrect endian handling of
     immediate data"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (65 commits)
  IB/hfi1: Constify struct flag_table
  RDMA/mana_ib: Set correct device into ib
  bnxt_re: Fix imm_data endianness
  RDMA: Fix netdev tracker in ib_device_set_netdev
  RDMA/hns: Fix mbx timing out before CMD execution is completed
  RDMA/hns: Fix insufficient extend DB for VFs.
  RDMA/hns: Fix undifined behavior caused by invalid max_sge
  RDMA/hns: Fix shift-out-bounds when max_inline_data is 0
  RDMA/hns: Fix missing pagesize and alignment check in FRMR
  RDMA/hns: Fix unmatch exception handling when init eq table fails
  RDMA/hns: Fix soft lockup under heavy CEQE load
  RDMA/hns: Check atomic wr length
  RDMA/ocrdma: Don't inline statistics functions
  RDMA/core: Introduce "name_assign_type" for an IB device
  RDMA/qib: Fix truncation compilation warnings in qib_verbs.c
  RDMA/qib: Fix truncation compilation warnings in qib_init.c
  RDMA/efa: Add EFA 0xefa3 PCI ID
  RDMA/mlx5: Support per-plane port IB counters by querying PPCNT register
  net/mlx5: mlx5_ifc update for accessing ppcnt register of plane ports
  RDMA/mlx5: Add plane index support when querying PTYS registers
  ...

Saeed Mahameed says:

====================
aux-sysfs-irqs

Shay Says:
==========
Introduce auxiliary bus IRQs sysfs

Today, PCI PFs and VFs, which are anchored on the PCI bus, display their
IRQ information in the <pci_device>/msi_irqs/<irq_num> sysfs files.  PCI
subfunctions (SFs) are similar to PFs and VFs and these SFs are anchored
on the auxiliary bus. However, these PCI SFs lack such IRQ information
on the auxiliary bus, leaving users without visibility into which IRQs
are used by the SFs. This absence makes it impossible to debug
situations and to understand the source of interrupts/SFs for
performance tuning and debug.

Additionally, the SFs are multifunctional devices supporting RDMA,
network devices, clocks, and more, similar to their peer PCI PFs and
VFs. Therefore, it is desirable to have SFs' IRQ information available
at the bus/device level.

To overcome the above limitations, this short series extends the
auxiliary bus to display IRQ information in sysfs, similar to that of
PFs and VFs.

It adds an 'irqs' directory under the auxiliary device and includes an
<irq_num> sysfs file within it.

For example:
$ ls /sys/bus/auxiliary/devices/mlx5_core.sf.1/irqs/
50  51  52  53  54  55  56  57  58

Patch summary:
patch-1 adds auxiliary bus to support irqs used by auxiliary device
patch-2 mlx5 driver using exposing irqs for PCI SF devices via auxiliary
        bus
==========

* tag 'aux-sysfs-irqs' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
  net/mlx5: Expose SFs IRQs
  driver core: auxiliary bus: show auxiliary device IRQs
  RDMA/mlx5: Add Qcounters req_transport_retries_exceeded/req_rnr_retries_exceeded
  net/mlx5: Reimplement write combining test
====================

Link: https://patch.msgid.link/20240711213140.256997-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

'struct flag_table' are not modified in this driver.

Constifying this structure moves some data to a read-only section, so
increase overall security.

On a x86_64, with allmodconfig:
Before:
======
   text	   data	    bss	    dec	    hex	filename
 302932	  40271	    112	 343315	  53d13	drivers/infiniband/hw/hfi1/chip.o

After:
=====
   text	   data	    bss	    dec	    hex	filename
 311636	  31567	    112	 343315	  53d13	drivers/infiniband/hw/hfi1/chip.o

Link: https://lore.kernel.org/r/782b6a648bfbbf2bb83f81a73c0460b5bb7642a1.1720959310.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Add mana_get_primary_netdev_rcu helper to get a primary
netdevice for a given port. When mana is used with
netvsc, the VF netdev is controlled by an upper netvsc
device. In a baremetal case, the VF netdev is the
primary device.

Use the mana_get_primary_netdev_rcu() helper in the mana_ib
to get the correct device for querying network states.

Fixes: 8b184e4f1c32 ("RDMA/mana_ib: Enable RoCE on port 1")
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://lore.kernel.org/r/1720705077-322-1-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Long Li <longli@microsoft.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>

When map a device between servers with MLX and BCM RoCE nics, RTRS
server complain about unknown imm type, and can't map the device,

After more debug, it seems bnxt_re wrongly handle the
imm_data, this patch fixed the compat issue with MLX for us.

In off list discussion, Selvin confirmed HW is working in little endian format
and all data needs to be converted to LE while providing.

This patch fix the endianness for imm_data

Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20240710122102.37569-1-jinpu.wang@ionos.com
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>

If a netdev has already been assigned, ib_device_set_netdev needs to
release the reference on the older netdev but it is mistakenly being
called for the new netdev. Fix it and in the process use netdev_put
to be symmetrical with the netdev_hold.

Fixes: 09f530f0c6d6 ("RDMA: Add netdevice_tracker to ib_device_set_netdev()")
Signed-off-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240710203310.19317-1-dsahern@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>

When a large number of tasks are issued, the speed of HW processing
mbx will slow down. The standard for judging mbx timeout in the current
firmware is 30ms, and the current timeout standard for the driver is also
30ms.

Considering that firmware scheduling in multi-function scenarios takes a
certain amount of time, this will cause the driver to time out too early
and report a failure before mbx execution times out.

This patch introduces a new mechanism that can set different timeouts for
different cmds and extends the timeout of mbx to 35ms.

Fixes: a04ff739f2a9 ("RDMA/hns: Add command queue support for hip08 RoCE driver")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20240710133705.896445-9-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>

VFs and its PF will share the memory of the extend DB. Currently,
the number of extend DB allocated by driver is only enough for PF.
This leads to a probability of DB loss and some other problems in
scenarios where both PF and VFs use a large number of QPs.

Fixes: 6b63597d3540 ("RDMA/hns: Add TSQ link table support")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20240710133705.896445-8-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>

If max_sge has been set to 0, roundup_pow_of_two() in
set_srq_basic_param() may have undefined behavior.

Fixes: 9dd052474a26 ("RDMA/hns: Allocate one more recv SGE for HIP08")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20240710133705.896445-7-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>