linux-stable.git/drivers/infiniband, branch v5.4.44

IB/ipoib: Fix double free of skb in case of multicast traffic in CM mode

2020-06-03T06:21:26+00:00

[ Upstream commit 1acba6a817852d4aa7916d5c4f2c82f702ee9224 ]

When connected mode is set, and we have connected and datagram traffic in
parallel, ipoib might crash with double free of datagram skb.

The current mechanism assumes that the order in the completion queue is
the same as the order of sent packets for all QPs. Order is kept only for
specific QP, in case of mixed UD and CM traffic we have few QPs (one UD and
few CM's) in parallel.

The problem:
----------------------------------------------------------

Transmit queue:
-----------------
UD skb pointer kept in queue itself, CM skb kept in spearate queue and
uses transmit queue as a placeholder to count the number of total
transmitted packets.

0   1   2   3   4  5  6  7  8   9  10  11 12 13 .........127
------------------------------------------------------------
NL ud1 UD2 CM1 ud3 cm2 cm3 ud4 cm4 ud5 NL NL NL ...........
------------------------------------------------------------
    ^                                  ^
   tail                               head

Completion queue (problematic scenario) - the order not the same as in
the transmit queue:

  1  2  3  4  5  6  7  8  9
------------------------------------
 ud1 CM1 UD2 ud3 cm2 cm3 ud4 cm4 ud5
------------------------------------

1. CM1 'wc' processing
   - skb freed in cm separate ring.
   - tx_tail of transmit queue increased although UD2 is not freed.
     Now driver assumes UD2 index is already freed and it could be used for
     new transmitted skb.

0   1   2   3   4  5  6  7  8   9  10  11 12 13 .........127
------------------------------------------------------------
NL NL  UD2 CM1 ud3 cm2 cm3 ud4 cm4 ud5 NL NL NL ...........
------------------------------------------------------------
        ^   ^                       ^
      (Bad)tail                    head
(Bad - Could be used for new SKB)

In this case (due to heavy load) UD2 skb pointer could be replaced by new
transmitted packet UD_NEW, as the driver assumes its free.  At this point
we will have to process two 'wc' with same index but we have only one
pointer to free.

During second attempt to free the same skb we will have NULL pointer
exception.

2. UD2 'wc' processing
   - skb freed according the index we got from 'wc', but it was already
     overwritten by mistake. So actually the skb that was released is the
     skb of the new transmitted packet and not the original one.

3. UD_NEW 'wc' processing
   - attempt to free already freed skb. NUll pointer exception.

The fix:
-----------------------------------------------------------------------

The fix is to stop using the UD ring as a placeholder for CM packets, the
cyclic ring variables tx_head and tx_tail will manage the UD tx_ring, a
new cyclic variables global_tx_head and global_tx_tail are introduced for
managing and counting the overall outstanding sent packets, then the send
queue will be stopped and waken based on these variables only.

Note that no locking is needed since global_tx_head is updated in the xmit
flow and global_tx_tail is updated in the NAPI flow only.  A previous
attempt tried to use one variable to count the outstanding sent packets,
but it did not work since xmit and NAPI flows can run at the same time and
the counter will be updated wrongly. Thus, we use the same simple cyclic
head and tail scheme that we have today for the UD tx_ring.

Fixes: 2c104ea68350 ("IB/ipoib: Get rid of the tx_outstanding variable in all modes")
Link: https://lore.kernel.org/r/20200527134705.480068-1-leon@kernel.org
Signed-off-by: Valentine Fatiev 
Signed-off-by: Alaa Hleihel 
Signed-off-by: Leon Romanovsky 
Acked-by: Doug Ledford 
Signed-off-by: Jason Gunthorpe 
Signed-off-by: Sasha Levin

RDMA/core: Fix double destruction of uobject

2020-06-03T06:21:25+00:00

[ Upstream commit c85f4abe66bea0b5db8d28d55da760c4fe0a0301 ]

Fix use after free when user user space request uobject concurrently for
the same object, within the RCU grace period.

In that case, remove_handle_idr_uobject() is called twice and we will have
an extra put on the uobject which cause use after free.  Fix it by leaving
the uobject write locked after it was removed from the idr.

Call to rdma_lookup_put_uobject with UVERBS_LOOKUP_DESTROY instead of
UVERBS_LOOKUP_WRITE will do the work.

  refcount_t: underflow; use-after-free.
  WARNING: CPU: 0 PID: 1381 at lib/refcount.c:28 refcount_warn_saturate+0xfe/0x1a0
  Kernel panic - not syncing: panic_on_warn set ...
  CPU: 0 PID: 1381 Comm: syz-executor.0 Not tainted 5.5.0-rc3 #8
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
  Call Trace:
   dump_stack+0x94/0xce
   panic+0x234/0x56f
   __warn+0x1cc/0x1e1
   report_bug+0x200/0x310
   fixup_bug.part.11+0x32/0x80
   do_error_trap+0xd3/0x100
   do_invalid_op+0x31/0x40
   invalid_op+0x1e/0x30
  RIP: 0010:refcount_warn_saturate+0xfe/0x1a0
  Code: 0f 0b eb 9b e8 23 f6 6d ff 80 3d 6c d4 19 03 00 75 8d e8 15 f6 6d ff 48 c7 c7 c0 02 55 bd c6 05 57 d4 19 03 01 e8 a2 58 49 ff <0f> 0b e9 6e ff ff ff e8 f6 f5 6d ff 80 3d 42 d4 19 03 00 0f 85 5c
  RSP: 0018:ffffc90002df7b98 EFLAGS: 00010282
  RAX: 0000000000000000 RBX: ffff88810f6a193c RCX: ffffffffba649009
  RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88811b0283cc
  RBP: 0000000000000003 R08: ffffed10236060e3 R09: ffffed10236060e3
  R10: 0000000000000001 R11: ffffed10236060e2 R12: ffff88810f6a193c
  R13: ffffc90002df7d60 R14: 0000000000000000 R15: ffff888116ae6a08
   uverbs_uobject_put+0xfd/0x140
   __uobj_perform_destroy+0x3d/0x60
   ib_uverbs_close_xrcd+0x148/0x170
   ib_uverbs_write+0xaa5/0xdf0
   __vfs_write+0x7c/0x100
   vfs_write+0x168/0x4a0
   ksys_write+0xc8/0x200
   do_syscall_64+0x9c/0x390
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x465b49
  Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
  RSP: 002b:00007f759d122c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
  RAX: ffffffffffffffda RBX: 000000000073bfa8 RCX: 0000000000465b49
  RDX: 000000000000000c RSI: 0000000020000080 RDI: 0000000000000003
  RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000246 R12: 00007f759d1236bc
  R13: 00000000004ca27c R14: 000000000070de40 R15: 00000000ffffffff
  Dumping ftrace buffer:
     (ftrace buffer empty)
  Kernel Offset: 0x39400000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)

Fixes: 7452a3c745a2 ("IB/uverbs: Allow RDMA_REMOVE_DESTROY to work concurrently with disassociate")
Link: https://lore.kernel.org/r/20200527135534.482279-1-leon@kernel.org
Signed-off-by: Maor Gottlieb 
Signed-off-by: Leon Romanovsky 
Signed-off-by: Jason Gunthorpe 
Signed-off-by: Sasha Levin

RDMA/pvrdma: Fix missing pci disable in pvrdma_pci_probe()

2020-06-03T06:21:22+00:00

[ Upstream commit db857e6ae548f0f4f4a0f63fffeeedf3cca21f9d ]

In function pvrdma_pci_probe(), pdev was not disabled in one error
path. Thus replace the jump target “err_free_device” by
"err_disable_pdev".

Fixes: 29c8d9eba550 ("IB: Add vmw_pvrdma driver")
Link: https://lore.kernel.org/r/20200523030457.16160-1-wu000273@umn.edu
Signed-off-by: Qiushi Wu 
Signed-off-by: Jason Gunthorpe 
Signed-off-by: Sasha Levin

IB/qib: Call kobject_put() when kobject_init_and_add() fails

2020-06-03T06:21:19+00:00

[ Upstream commit a35cd6447effd5c239b564c80fa109d05ff3d114 ]

When kobject_init_and_add() returns an error in the function
qib_create_port_files(), the function kobject_put() is not called for the
corresponding kobject, which potentially leads to memory leak.

This patch fixes the issue by calling kobject_put() even if
kobject_init_and_add() fails. In addition, the ppd->diagc_kobj is released
along with other kobjects when the sysfs is unregistered.

Fixes: f931551bafe1 ("IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters")
Link: https://lore.kernel.org/r/20200512031328.189865.48627.stgit@awfm-01.aw.intel.com
Cc: 
Suggested-by: Lin Yi 
Reviewed-by: Mike Marciniszyn 
Signed-off-by: Kaike Wan 
Signed-off-by: Dennis Dalessandro 
Reviewed-by: Leon Romanovsky 
Signed-off-by: Jason Gunthorpe 
Signed-off-by: Sasha Levin

IB/i40iw: Remove bogus call to netdev_master_upper_dev_get()

2020-06-03T06:21:13+00:00

[ Upstream commit 856ec7f64688387b100b7083cdf480ce3ac41227 ]

Local variable netdev is not used in these calls.

It should be noted, that this change is required to work in bonded mode.
Otherwise we would get the following assert:

 "RTNL: assertion failed at net/core/dev.c (5665)"

With the calltrace as follows:
	dump_stack+0x19/0x1b
	netdev_master_upper_dev_get+0x61/0x70
	i40iw_addr_resolve_neigh+0x1e8/0x220
	i40iw_make_cm_node+0x296/0x700
	? i40iw_find_listener.isra.10+0xcc/0x110
	i40iw_receive_ilq+0x3d4/0x810
	i40iw_puda_poll_completion+0x341/0x420
	i40iw_process_ceq+0xa5/0x280
	i40iw_ceq_dpc+0x1e/0x40
	tasklet_action+0x83/0x140
	__do_softirq+0x125/0x2bb
	call_softirq+0x1c/0x30
	do_softirq+0x65/0xa0
	irq_exit+0x105/0x110
	do_IRQ+0x56/0xf0
	common_interrupt+0x16a/0x16a
	? cpuidle_enter_state+0x57/0xd0
	cpuidle_idle_call+0xde/0x230
	arch_cpu_idle+0xe/0xc0
	cpu_startup_entry+0x14a/0x1e0
	start_secondary+0x1f7/0x270
	start_cpu+0x5/0x14

Link: https://lore.kernel.org/r/20200428131511.11049-1-den@openvz.org
Signed-off-by: Denis V. Lunev 
Acked-by: Shiraz Saleem 
Signed-off-by: Jason Gunthorpe 
Signed-off-by: Sasha Levin

RDMA/iw_cxgb4: Fix incorrect function parameters

2020-05-20T06:20:26+00:00

[ Upstream commit c8b1f340e54158662acfa41d6dee274846370282 ]

While reading the TCB field in t4_tcb_get_field32() the wrong mask is
passed as a parameter which leads the driver eventually to a kernel
panic/app segfault from access to an illegal SRQ index while flushing the
SRQ completions during connection teardown.

Fixes: 11a27e2121a5 ("iw_cxgb4: complete the cached SRQ buffers")
Link: https://lore.kernel.org/r/20200511185608.5202-1-bharat@chelsio.com
Signed-off-by: Potnuri Bharat Teja 
Signed-off-by: Jason Gunthorpe 
Signed-off-by: Sasha Levin

RDMA/core: Fix double put of resource

2020-05-20T06:20:26+00:00

[ Upstream commit 50bbe3d34fea74b7c0fabe553c40c2f4a48bb9c3 ]

Do not decrease the reference count of resource tracker object twice in
the error flow of res_get_common_doit.

Fixes: c5dfe0ea6ffa ("RDMA/nldev: Add resource tracker doit callback")
Link: https://lore.kernel.org/r/20200507062942.98305-1-leon@kernel.org
Signed-off-by: Maor Gottlieb 
Signed-off-by: Leon Romanovsky 
Signed-off-by: Jason Gunthorpe 
Signed-off-by: Sasha Levin

IB/core: Fix potential NULL pointer dereference in pkey cache

2020-05-20T06:20:26+00:00

[ Upstream commit 1901b91f99821955eac2bd48fe25ee983385dc00 ]

The IB core pkey cache is populated by procedure ib_cache_update().
Initially, the pkey cache pointer is NULL. ib_cache_update allocates a
buffer and populates it with the device's pkeys, via repeated calls to
procedure ib_query_pkey().

If there is a failure in populating the pkey buffer via ib_query_pkey(),
ib_cache_update does not replace the old pkey buffer cache with the
updated one -- it leaves the old cache as is.

Since initially the pkey buffer cache is NULL, when calling
ib_cache_update the first time, a failure in ib_query_pkey() will cause
the pkey buffer cache pointer to remain NULL.

In this situation, any calls subsequent to ib_get_cached_pkey(),
ib_find_cached_pkey(), or ib_find_cached_pkey_exact() will try to
dereference the NULL pkey cache pointer, causing a kernel panic.

Fix this by checking the ib_cache_update() return value.

Fixes: 8faea9fd4a39 ("RDMA/cache: Move the cache per-port data into the main ib_port_data")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/r/20200507071012.100594-1-leon@kernel.org
Signed-off-by: Jack Morgenstein 
Signed-off-by: Leon Romanovsky 
Signed-off-by: Jason Gunthorpe 
Signed-off-by: Sasha Levin

IB/mlx4: Test return value of calls to ib_get_cached_pkey

2020-05-20T06:20:25+00:00

[ Upstream commit 6693ca95bd4330a0ad7326967e1f9bcedd6b0800 ]

In the mlx4_ib_post_send() flow, some functions call ib_get_cached_pkey()
without checking its return value. If ib_get_cached_pkey() returns an
error code, these functions should return failure.

Fixes: 1ffeb2eb8be9 ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support")
Fixes: 225c7b1feef1 ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters")
Fixes: e622f2f4ad21 ("IB: split struct ib_send_wr")
Link: https://lore.kernel.org/r/20200426075921.130074-1-leon@kernel.org
Signed-off-by: Jack Morgenstein 
Signed-off-by: Leon Romanovsky 
Signed-off-by: Jason Gunthorpe 
Signed-off-by: Sasha Levin

RDMA/rxe: Always return ERR_PTR from rxe_create_mmap_info()

2020-05-20T06:20:25+00:00

[ Upstream commit bb43c8e382e5da0ee253e3105d4099820ff4d922 ]

The commit below modified rxe_create_mmap_info() to return ERR_PTR's but
didn't update the callers to handle them. Modify rxe_create_mmap_info() to
only return ERR_PTR and fix all error checking after
rxe_create_mmap_info() is called.

Ensure that all other exit paths properly set the error return.

Fixes: ff23dfa13457 ("IB: Pass only ib_udata in function prototypes")
Link: https://lore.kernel.org/r/20200425233545.17210-1-sudipm.mukherjee@gmail.com
Link: https://lore.kernel.org/r/20200511183742.GB225608@mwanda
Cc: stable@vger.kernel.org [5.4+]
Signed-off-by: Sudip Mukherjee 
Signed-off-by: Dan Carpenter 
Signed-off-by: Jason Gunthorpe 
Signed-off-by: Sasha Levin