linux-stable.git/drivers/infiniband, branch v5.4.166

IB/hfi1: Correct guard on eager buffer deallocation

2021-12-14T13:49:00+00:00

commit 9292f8f9a2ac42eb320bced7153aa2e63d8cc13a upstream.

The code tests the dma address which legitimately can be 0.

The code should test the kernel logical address to avoid leaking eager
buffer allocations that happen to map to a dma address of 0.

Fixes: 60368186fd85 ("IB/hfi1: Fix user-space buffers mapping with IOMMU enabled")
Link: https://lore.kernel.org/r/20211129191952.101968.17137.stgit@awfm-01.cornelisnetworks.com
Signed-off-by: Mike Marciniszyn 
Signed-off-by: Dennis Dalessandro 
Signed-off-by: Jason Gunthorpe 
Signed-off-by: Greg Kroah-Hartman

RDMA/bnxt_re: Check if the vlan is valid before reporting

2021-11-26T09:47:14+00:00

[ Upstream commit 6bda39149d4b8920fdb8744090653aca3daa792d ]

When VF is configured with default vlan, HW strips the vlan from the
packet and driver receives it in Rx completion. VLAN needs to be reported
for UD work completion only if the vlan is configured on the host. Add a
check for valid vlan in the UD receive path.

Link: https://lore.kernel.org/r/1631709163-2287-12-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier 
Signed-off-by: Jason Gunthorpe 
Signed-off-by: Sasha Levin

RDMA/mlx4: Return missed an error if device doesn't support steering

2021-11-17T08:48:43+00:00

[ Upstream commit f4e56ec4452f48b8292dcf0e1c4bdac83506fb8b ]

The error flow fixed in this patch is not possible because all kernel
users of create QP interface check that device supports steering before
set IB_QP_CREATE_NETIF_QP flag.

Fixes: c1c98501121e ("IB/mlx4: Add support for steerable IB UD QPs")
Link: https://lore.kernel.org/r/91c61f6e60eb0240f8bbc321fda7a1d2986dd03c.1634023677.git.leonro@nvidia.com
Reported-by: Dan Carpenter 
Signed-off-by: Leon Romanovsky 
Signed-off-by: Jason Gunthorpe 
Signed-off-by: Sasha Levin

RDMA/bnxt_re: Fix query SRQ failure

2021-11-17T08:48:41+00:00

[ Upstream commit 598d16fa1bf93431ad35bbab3ed1affe4fb7b562 ]

Fill the missing parameters for the FW command while querying SRQ.

Fixes: 37cb11acf1f7 ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters")
Link: https://lore.kernel.org/r/1631709163-2287-8-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier 
Reviewed-by: Leon Romanovsky 
Signed-off-by: Jason Gunthorpe 
Signed-off-by: Sasha Levin

RDMA/rxe: Fix wrong port_cap_flags

2021-11-17T08:48:41+00:00

[ Upstream commit dcd3f985b20ffcc375f82ca0ca9f241c7025eb5e ]

The port->attr.port_cap_flags should be set to enum
ib_port_capability_mask_bits in ib_mad.h, not
RDMA_CORE_CAP_PROT_ROCE_UDP_ENCAP.

Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20210831083223.65797-1-weijunji@bytedance.com
Signed-off-by: Junji Wei 
Reviewed-by: Leon Romanovsky 
Signed-off-by: Jason Gunthorpe 
Signed-off-by: Sasha Levin

RDMA/qedr: Fix NULL deref for query_qp on the GSI QP

2021-11-17T08:48:24+00:00

commit 4f960393a0ee9a39469ceb7c8077ae8db665cc12 upstream.

This patch fixes a crash caused by querying the QP via netlink, and
corrects the state of GSI qp. GSI qp's have a NULL qed_qp.

The call trace is generated by:
 $ rdma res show

 BUG: kernel NULL pointer dereference, address: 0000000000000034
 Hardware name: Dell Inc. PowerEdge R720/0M1GCR, BIOS 1.2.6 05/10/2012
 RIP: 0010:qed_rdma_query_qp+0x33/0x1a0 [qed]
 RSP: 0018:ffffba560a08f580 EFLAGS: 00010206
 RAX: 0000000200000000 RBX: ffffba560a08f5b8 RCX: 0000000000000000
 RDX: ffffba560a08f5b8 RSI: 0000000000000000 RDI: ffff9807ee458090
 RBP: ffffba560a08f5a0 R08: 0000000000000000 R09: ffff9807890e7048
 R10: ffffba560a08f658 R11: 0000000000000000 R12: 0000000000000000
 R13: ffff9807ee458090 R14: ffff9807f0afb000 R15: ffffba560a08f7ec
 FS:  00007fbbf8bfe740(0000) GS:ffff980aafa00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000034 CR3: 00000001720ba001 CR4: 00000000000606f0
 Call Trace:
  qedr_query_qp+0x82/0x360 [qedr]
  ib_query_qp+0x34/0x40 [ib_core]
  ? ib_query_qp+0x34/0x40 [ib_core]
  fill_res_qp_entry_query.isra.26+0x47/0x1d0 [ib_core]
  ? __nla_put+0x20/0x30
  ? nla_put+0x33/0x40
  fill_res_qp_entry+0xe3/0x120 [ib_core]
  res_get_common_dumpit+0x3f8/0x5d0 [ib_core]
  ? fill_res_cm_id_entry+0x1f0/0x1f0 [ib_core]
  nldev_res_get_qp_dumpit+0x1a/0x20 [ib_core]
  netlink_dump+0x156/0x2f0
  __netlink_dump_start+0x1ab/0x260
  rdma_nl_rcv+0x1de/0x330 [ib_core]
  ? nldev_res_get_cm_id_dumpit+0x20/0x20 [ib_core]
  netlink_unicast+0x1b8/0x270
  netlink_sendmsg+0x33e/0x470
  sock_sendmsg+0x63/0x70
  __sys_sendto+0x13f/0x180
  ? setup_sgl.isra.12+0x70/0xc0
  __x64_sys_sendto+0x28/0x30
  do_syscall_64+0x3a/0xb0
  entry_SYSCALL_64_after_hwframe+0x44/0xae

Cc: stable@vger.kernel.org
Fixes: cecbcddf6461 ("qedr: Add support for QP verbs")
Link: https://lore.kernel.org/r/20211027184329.18454-1-palok@marvell.com
Signed-off-by: Ariel Elior 
Signed-off-by: Shai Malin 
Signed-off-by: Prabhakar Kushwaha 
Signed-off-by: Alok Prasad 
Signed-off-by: Jason Gunthorpe 
Signed-off-by: Greg Kroah-Hartman

RDMA/sa_query: Use strscpy_pad instead of memcpy to copy a string

2021-11-02T18:46:14+00:00

commit 64733956ebba7cc629856f4a6ee35a52bc9c023f upstream.

When copying the device name, the length of the data memcpy copied exceeds
the length of the source buffer, which cause the KASAN issue below.  Use
strscpy_pad() instead.

 BUG: KASAN: slab-out-of-bounds in ib_nl_set_path_rec_attrs+0x136/0x320 [ib_core]
 Read of size 64 at addr ffff88811a10f5e0 by task rping/140263
 CPU: 3 PID: 140263 Comm: rping Not tainted 5.15.0-rc1+ #1
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
 Call Trace:
  dump_stack_lvl+0x57/0x7d
  print_address_description.constprop.0+0x1d/0xa0
  kasan_report+0xcb/0x110
  kasan_check_range+0x13d/0x180
  memcpy+0x20/0x60
  ib_nl_set_path_rec_attrs+0x136/0x320 [ib_core]
  ib_nl_make_request+0x1c6/0x380 [ib_core]
  send_mad+0x20a/0x220 [ib_core]
  ib_sa_path_rec_get+0x3e3/0x800 [ib_core]
  cma_query_ib_route+0x29b/0x390 [rdma_cm]
  rdma_resolve_route+0x308/0x3e0 [rdma_cm]
  ucma_resolve_route+0xe1/0x150 [rdma_ucm]
  ucma_write+0x17b/0x1f0 [rdma_ucm]
  vfs_write+0x142/0x4d0
  ksys_write+0x133/0x160
  do_syscall_64+0x43/0x90
  entry_SYSCALL_64_after_hwframe+0x44/0xae
 RIP: 0033:0x7f26499aa90f
 Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 29 fd ff ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 5c fd ff ff 48
 RSP: 002b:00007f26495f2dc0 EFLAGS: 00000293 ORIG_RAX: 0000000000000001
 RAX: ffffffffffffffda RBX: 00000000000007d0 RCX: 00007f26499aa90f
 RDX: 0000000000000010 RSI: 00007f26495f2e00 RDI: 0000000000000003
 RBP: 00005632a8315440 R08: 0000000000000000 R09: 0000000000000001
 R10: 0000000000000000 R11: 0000000000000293 R12: 00007f26495f2e00
 R13: 00005632a83154e0 R14: 00005632a8315440 R15: 00005632a830a810

 Allocated by task 131419:
  kasan_save_stack+0x1b/0x40
  __kasan_kmalloc+0x7c/0x90
  proc_self_get_link+0x8b/0x100
  pick_link+0x4f1/0x5c0
  step_into+0x2eb/0x3d0
  walk_component+0xc8/0x2c0
  link_path_walk+0x3b8/0x580
  path_openat+0x101/0x230
  do_filp_open+0x12e/0x240
  do_sys_openat2+0x115/0x280
  __x64_sys_openat+0xce/0x140
  do_syscall_64+0x43/0x90
  entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: 2ca546b92a02 ("IB/sa: Route SA pathrecord query through netlink")
Link: https://lore.kernel.org/r/72ede0f6dab61f7f23df9ac7a70666e07ef314b0.1635055496.git.leonro@nvidia.com
Signed-off-by: Mark Zhang 
Reviewed-by: Mark Bloch 
Signed-off-by: Leon Romanovsky 
Signed-off-by: Jason Gunthorpe 
Signed-off-by: Greg Kroah-Hartman

RDMA/mlx5: Set user priority for DCT

2021-11-02T18:46:13+00:00

commit 1ab52ac1e9bc9391f592c9fa8340a6e3e9c36286 upstream.

Currently, the driver doesn't set the PCP-based priority for DCT, hence
DCT response packets are transmitted without user priority.

Fix it by setting user provided priority in the eth_prio field in the DCT
context, which in turn sets the value in the transmitted packet.

Fixes: 776a3906b692 ("IB/mlx5: Add support for DC target QP")
Link: https://lore.kernel.org/r/5fd2d94a13f5742d8803c218927322257d53205c.1633512672.git.leonro@nvidia.com
Signed-off-by: Patrisious Haddad 
Reviewed-by: Maor Gottlieb 
Signed-off-by: Leon Romanovsky 
Signed-off-by: Jason Gunthorpe 
Signed-off-by: Greg Kroah-Hartman

IB/hfi1: Fix abba locking issue with sc_disable()

2021-11-02T18:46:13+00:00

commit 13bac861952a78664907a0f927d3e874e9a59034 upstream.

sc_disable() after having disabled the send context wakes up any waiters
by calling hfi1_qp_wakeup() while holding the waitlock for the sc.

This is contrary to the model for all other calls to hfi1_qp_wakeup()
where the waitlock is dropped and a local is used to drive calls to
hfi1_qp_wakeup().

Fix by moving the sc->piowait into a local list and driving the wakeup
calls from the list.

Fixes: 099a884ba4c0 ("IB/hfi1: Handle wakeup of orphaned QPs for pio")
Link: https://lore.kernel.org/r/20211013141852.128104.2682.stgit@awfm-01.cornelisnetworks.com
Signed-off-by: Mike Marciniszyn 
Reported-by: TOTE Robot 
Signed-off-by: Dennis Dalessandro 
Signed-off-by: Jason Gunthorpe 
Signed-off-by: Greg Kroah-Hartman

IB/qib: Protect from buffer overflow in struct qib_user_sdma_pkt fields

2021-11-02T18:46:13+00:00

commit d39bf40e55e666b5905fdbd46a0dced030ce87be upstream.

Overflowing either addrlimit or bytes_togo can allow userspace to trigger
a buffer overflow of kernel memory. Check for overflows in all the places
doing math on user controlled buffers.

Fixes: f931551bafe1 ("IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters")
Link: https://lore.kernel.org/r/20211012175519.7298.77738.stgit@awfm-01.cornelisnetworks.com
Reported-by: Ilja Van Sprundel 
Reviewed-by: Dennis Dalessandro 
Signed-off-by: Mike Marciniszyn 
Signed-off-by: Dennis Dalessandro 
Signed-off-by: Jason Gunthorpe 
Signed-off-by: Greg Kroah-Hartman