linux-stable.git/drivers/infiniband, branch v4.1

Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending

2015-06-21T00:26:01+00:00

Pull scsi target fixes from Nicholas Bellinger:
 "Apologies for the late pull request.

  Here are the outstanding target-pending fixes for v4.1 code.

  The series contains three patches from Sagi + Co that address a few
  iser-target issues that have been uncovered during recent testing at
  Mellanox.

  Patch #1 has a v3.16+ stable tag, and #2-3 have v3.10+ stable tags"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  iser-target: Fix possible use-after-free
  iser-target: release stale iser connections
  iser-target: Fix variable-length response error completion

iser-target: Fix possible use-after-free

2015-06-09T05:17:09+00:00

iser connection termination process happens in 2 stages:
- isert_wait_conn:
  - resumes rdma disconnect
  - wait for session commands
  - wait for flush completions (post a marked wr to signal we are done)
  - wait for logout completion
  - queue work for connection cleanup (depends on disconnected/timewait
    events)
- isert_free_conn
  - last reference put on the connection

In case we are terminating during IOs, we might be posting send/recv
requests after we posted the last work request which might lead
to a use-after-free condition in isert_handle_wc.
After we posted the last wr in isert_wait_conn we are guaranteed that
no successful completions will follow (meaning no new work request posts
may happen) but other flush errors might still come. So before we
put the last reference on the connection, we repeat the process of
posting a marked work request (isert_wait4flush) in order to make sure all
pending completions were flushed.

Signed-off-by: Sagi Grimberg 
Signed-off-by: Jenny Falkovich 
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger

iser-target: release stale iser connections

2015-06-09T05:16:40+00:00

When receiving a new iser connect request we serialize
the pending requests by adding the newly created iser connection
to the np accept list and let the login thread process the connect
request one by one (np_accept_wait).

In case we received a disconnect request before the iser_conn
has begun processing (still linked in np_accept_list) we should
detach it from the list and clean it up and not have the login
thread process a stale connection. We do it only when the connection
state is not already terminating (initiator driven disconnect) as
this might lead us to access np_accept_mutex after the np was released
in live shutdown scenarios.

Signed-off-by: Sagi Grimberg 
Signed-off-by: Jenny Falkovich 
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger

iser-target: Fix variable-length response error completion

2015-06-09T05:16:17+00:00

Since commit "2426bd456a6 target: Report correct response ..."
we might get a command with data_size that does not fit to
the number of allocated data sg elements. Given that we rely on
cmd t_data_nents which might be different than the data_size,
we sometimes receive local length error completion. The correct
approach would be to take the command data_size into account when
constructing the ib sg_list.

Signed-off-by: Sagi Grimberg 
Signed-off-by: Jenny Falkovich 
Cc: stable@vger.kernel.org # 3.16+
Signed-off-by: Nicholas Bellinger

Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending

2015-05-31T18:31:42+00:00

Pull SCSI target fixes from Nicholas Bellinger:
 "These are mostly minor fixes, with the exception of the following that
  address fall-out from recent v4.1-rc1 changes:

   - regression fix related to the big fabric API registration changes
     and configfs_depend_item() usage, that required cherry-picking one
     of HCH's patches from for-next to address the issue for v4.1 code.

   - remaining TCM-USER -v2 related changes to enforce full CDB
     passthrough from Andy + Ilias.

  Also included is a target_core_pscsi driver fix from Andy that
  addresses a long standing issue with a Scsi_Host reference being
  leaked on PSCSI device shutdown"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  iser-target: Fix error path in isert_create_pi_ctx()
  target: Use a PASSTHROUGH flag instead of transport_types
  target: Move passthrough CDB parsing into a common function
  target/user: Only support full command pass-through
  target/user: Update example code for new ABI requirements
  target/pscsi: Don't leak scsi_host if hba is VIRTUAL_HOST
  target: Fix se_tpg_tfo->tf_subsys regression + remove tf_subsystem
  target: Drop signal_pending checks after interruptible lock acquire
  target: Add missing parentheses
  target: Fix bidi command handling
  target/user: Disallow full passthrough (pass_level=0)
  ISCSI: fix minor memory leak

iser-target: Fix error path in isert_create_pi_ctx()

2015-05-31T03:01:04+00:00

We don't assign pi_ctx to desc->pi_ctx until we're certain to succeed
in the function.  That means the cleanup path should use the local
pi_ctx variable, not desc->pi_ctx.

This was detected by Coverity (CID 1260062).

Signed-off-by: Roland Dreier 
Signed-off-by: Nicholas Bellinger

IB/cma: Fix broken AF_IB UD support

2015-05-20T20:15:56+00:00

Support for using UD and AF_IB is currently broken.  The
IB_CM_SIDR_REQ_RECEIVED message is not handled properly in
cma_save_net_info() and we end up falling into code that will try and
process the request as ipv4/ipv6, which will end up failing.

The resolution is to add a check for the SIDR_REQ and call
cma_save_ib_info() with a NULL path record.  Change cma_save_ib_info()
to copy the src sib info from the listen_id when the path record is NULL.

Reported-by: Hari Shankar 
Signed-off-by: Matt Finlay 
Acked-by: Sean Hefty 
Signed-off-by: Doug Ledford

ib/cm: Change reject message type when destroying cm_id

2015-05-20T16:41:38+00:00

Problem reported by: Ted Kim :

We have a case where a Linux system and a non-Linux system are
trying to interoperate.  The Linux host is the active side and
starts the connection establishment, but later decides to not go
through with the connection setup and does rdma_destroy_id().

The rdma_destroy_id() eventually works its way down to cm_destroy_id()
in core/cm.c, where a REJ is sent. The non-Linux system
has some trouble recognizing the REJ because of:

A. CM states which can't receive the REJ
B. Some issues about REJ formatting (missing comm ID)

ISSUE A: That part of the spec says, a Consumer Reject REJ can be
sent for a connection abort, but it goes further
and says: can send a REJ message with a "Consumer Reject"
Reason code if they are in a CM state (i.e. REP
Rcvd, MRA(REP) Sent, REQ Rcvd, MRA Sent) that allows
a REJ to be sent (lines 35-38).

Of the states listed there in that sentence, it would
seem to limit the active side to using the Consumer Reject
(for the abort case) in just the REP-Rcvd and MRA-REP-Sent
states. That is basically only after the active side
sees a REP (or alternatively goes down the state transitions
to timeout in which case a Timeout REJ is sent).

As a fix, in cm-destroy-id() move the IB-CM-MRA-REQ-RCVD case
to the same as REQ-SENT.  Essentially, make a REJ sent after
getting an MRA on active side a timeout rather than Consumer-
Reject, which is arguably more correct with the CM state
diagrams previous to getting a REP.

Signed-off-by: Ted Kim 
Signed-off-by: Sean Hefty

RDMA/ocrdma: Update ocrdma version number

2015-05-18T14:25:24+00:00

Updating the driver version to 10.6.0.0

Signed-off-by: Selvin Xavier 
Signed-off-by: Doug Ledford

RDMA/ocrdma: Fail connection for MTU lesser than 512

2015-05-18T14:25:24+00:00

HW currently restricts the IB MTU range between 512 and 4096.
Fail connection for MTUs lesser than 512.

Signed-off-by: Naga Irrinki 
Signed-off-by: Selvin Xavier 
Signed-off-by: Doug Ledford