linux-stable.git/drivers/infiniband, branch v3.12.65

IB/mlx4: Fix incorrect MC join state bit-masking on SR-IOV

2016-10-07T08:06:57+00:00

commit e5ac40cd66c2f3cd11bc5edc658f012661b16347 upstream.

Because of an incorrect bit-masking done on the join state bits, when
handling a join request we failed to detect a difference between the
group join state and the request join state when joining as send only
full member (0x8). This caused the MC join request not to be sent.
This issue is relevant only when SRIOV is enabled and SM supports
send only full member.

This fix separates scope bits and join states bits a nibble each.

Fixes: b9c5d6a64358 ('IB/mlx4: Add multicast group (MCG) paravirtualization for SR-IOV')
Signed-off-by: Alex Vesker 
Signed-off-by: Leon Romanovsky 
Signed-off-by: Doug Ledford 
Signed-off-by: Jiri Slaby

IB/ipoib: Don't allow MC joins during light MC flush

2016-10-07T08:06:57+00:00

commit 344bacca8cd811809fc33a249f2738ab757d327f upstream.

This fix solves a race between light flush and on the fly joins.
Light flush doesn't set the device to down and unset IPOIB_OPER_UP
flag, this means that if while flushing we have a MC join in progress
and the QP was attached to BC MGID we can have a mismatches when
re-attaching a QP to the BC MGID.

The light flush would set the broadcast group to NULL causing an on
the fly join to rejoin and reattach to the BC MCG as well as adding
the BC MGID to the multicast list. The flush process would later on
remove the BC MGID and detach it from the QP. On the next flush
the BC MGID is present in the multicast list but not found when trying
to detach it because of the previous double attach and single detach.

[18332.714265] ------------[ cut here ]------------
[18332.717775] WARNING: CPU: 6 PID: 3767 at drivers/infiniband/core/verbs.c:280 ib_dealloc_pd+0xff/0x120 [ib_core]
...
[18332.775198] Hardware name: Red Hat KVM, BIOS Bochs 01/01/2011
[18332.779411]  0000000000000000 ffff8800b50dfbb0 ffffffff813fed47 0000000000000000
[18332.784960]  0000000000000000 ffff8800b50dfbf0 ffffffff8109add1 0000011832f58300
[18332.790547]  ffff880226a596c0 ffff880032482000 ffff880032482830 ffff880226a59280
[18332.796199] Call Trace:
[18332.798015]  [] dump_stack+0x63/0x8c
[18332.801831]  [] __warn+0xd1/0xf0
[18332.805403]  [] warn_slowpath_null+0x1d/0x20
[18332.809706]  [] ib_dealloc_pd+0xff/0x120 [ib_core]
[18332.814384]  [] ipoib_transport_dev_cleanup+0xfc/0x1d0 [ib_ipoib]
[18332.820031]  [] ipoib_ib_dev_cleanup+0x98/0x110 [ib_ipoib]
[18332.825220]  [] ipoib_dev_cleanup+0x2d8/0x550 [ib_ipoib]
[18332.830290]  [] ipoib_uninit+0x2f/0x40 [ib_ipoib]
[18332.834911]  [] rollback_registered_many+0x1aa/0x2c0
[18332.839741]  [] rollback_registered+0x31/0x40
[18332.844091]  [] unregister_netdevice_queue+0x48/0x80
[18332.848880]  [] ipoib_vlan_delete+0x1fb/0x290 [ib_ipoib]
[18332.853848]  [] delete_child+0x7d/0xf0 [ib_ipoib]
[18332.858474]  [] dev_attr_store+0x18/0x30
[18332.862510]  [] sysfs_kf_write+0x3a/0x50
[18332.866349]  [] kernfs_fop_write+0x120/0x170
[18332.870471]  [] __vfs_write+0x28/0xe0
[18332.874152]  [] ? percpu_down_read+0x1f/0x50
[18332.878274]  [] vfs_write+0xa2/0x1a0
[18332.881896]  [] SyS_write+0x46/0xa0
[18332.885632]  [] do_syscall_64+0x57/0xb0
[18332.889709]  [] entry_SYSCALL64_slow_path+0x25/0x25
[18332.894727] ---[ end trace 09ebbe31f831ef17 ]---

Fixes: ee1e2c82c245 ("IPoIB: Refresh paths instead of flushing them on SM change events")
Signed-off-by: Alex Vesker 
Signed-off-by: Leon Romanovsky 
Signed-off-by: Doug Ledford 
Signed-off-by: Jiri Slaby

IB/core: Fix use after free in send_leave function

2016-10-07T08:06:56+00:00

commit 68c6bcdd8bd00394c234b915ab9b97c74104130c upstream.

The function send_leave sets the member: group->query_id
(group->query_id = ret) after calling the sa_query, but leave_handler
can be executed before the setting and it might delete the group object,
and will get a memory corruption.

Additionally, this patch gets rid of group->query_id variable which is
not used.

Fixes: faec2f7b96b5 ('IB/sa: Track multicast join/leave requests')
Signed-off-by: Erez Shitrit 
Signed-off-by: Leon Romanovsky 
Signed-off-by: Doug Ledford 
Signed-off-by: Jiri Slaby

IB/ipoib: Fix memory corruption in ipoib cm mode connect flow

2016-10-07T08:06:56+00:00

commit 546481c2816ea3c061ee9d5658eb48070f69212e upstream.

When a new CM connection is being requested, ipoib driver copies data
from the path pointer in the CM/tx object, the path object might be
invalid at the point and memory corruption will happened later when now
the CM driver will try using that data.

The next scenario demonstrates it:
	neigh_add_path --> ipoib_cm_create_tx -->
	queue_work (pointer to path is in the cm/tx struct)
	#while the work is still in the queue,
	#the port goes down and causes the ipoib_flush_paths:
	ipoib_flush_paths --> path_free --> kfree(path)
	#at this point the work scheduled starts.
	ipoib_cm_tx_start --> copy from the (invalid)path pointer:
	(memcpy(&pathrec, &p->path->pathrec, sizeof pathrec);)
	 -> memory corruption.

To fix that the driver now starts the CM/tx connection only if that
specific path exists in the general paths database.
This check is protected with the relevant locks, and uses the gid from
the neigh member in the CM/tx object which is valid according to the ref
count that was taken by the CM/tx.

Fixes: 839fcaba35 ('IPoIB: Connected mode experimental support')
Signed-off-by: Erez Shitrit 
Signed-off-by: Leon Romanovsky 
Signed-off-by: Doug Ledford 
Signed-off-by: Jiri Slaby

IB/srpt: Simplify srpt_handle_tsk_mgmt()

2016-10-06T06:22:03+00:00

commit 51093254bf879bc9ce96590400a87897c7498463 upstream.

Let the target core check task existence instead of the SRP target
driver. Additionally, let the target core check the validity of the
task management request instead of the ib_srpt driver.

This patch fixes the following kernel crash:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000001
IP: [] srpt_handle_new_iu+0x6d7/0x790 [ib_srpt]
Oops: 0002 [#1] SMP
Call Trace:
 [] srpt_process_completion+0xde/0x570 [ib_srpt]
 [] srpt_compl_thread+0x13f/0x160 [ib_srpt]
 [] kthread+0xcf/0xe0
 [] ret_from_fork+0x7c/0xb0

Signed-off-by: Bart Van Assche 
Fixes: 3e4f574857ee ("ib_srpt: Convert TMR path to target_submit_tmr")
Tested-by: Alex Estrin 
Reviewed-by: Christoph Hellwig 
Cc: Nicholas Bellinger 
Cc: Sagi Grimberg 
Cc: stable 
Signed-off-by: Doug Ledford 
Acked-by: Benjamin Poirier 
Signed-off-by: Jiri Slaby

IB/mlx4: Fix the SQ size of an RC QP

2016-08-19T07:51:23+00:00

commit f2940e2c76bb554a7fbdd28ca5b90904117a9e96 upstream.

When calculating the required size of an RC QP send queue, leave
enough space for masked atomic operations, which require more space than
"regular" atomic operation.

Fixes: 6fa8f719844b ("IB/mlx4: Add support for masked atomic operations")
Signed-off-by: Yishai Hadas 
Reviewed-by: Jack Morgenstein 
Reviewed-by: Eran Ben Elisha 
Signed-off-by: Leon Romanovsky 
Signed-off-by: Doug Ledford 
Signed-off-by: Jiri Slaby

IB/IPoIB: Don't update neigh validity for unresolved entries

2016-08-19T07:51:22+00:00

commit 61c78eea9516a921799c17b4c20558e2aa780fd3 upstream.

ipoib_neigh_get unconditionally updates the "alive" variable member on
any packet send.  This prevents the neighbor garbage collection from
cleaning out a dead neighbor entry if we are still queueing packets
for it.  If the queue for this neighbor is full, then don't update the
alive timestamp.  That way the neighbor can time out even if packets
are still being queued as long as none of them are being sent.

Fixes: b63b70d87741 ("IPoIB: Use a private hash table for path lookup in xmit path")
Signed-off-by: Erez Shitrit 
Signed-off-by: Leon Romanovsky 
Signed-off-by: Doug Ledford 
Signed-off-by: Jiri Slaby

IB/mlx5: Fix post send fence logic

2016-08-19T07:51:22+00:00

commit c9b254955b9f8814966f5dabd34c39d0e0a2b437 upstream.

If the caller specified IB_SEND_FENCE in the send flags of the work
request and no previous work request stated that the successive one
should be fenced, the work request would be executed without a fence.
This could result in RDMA read or atomic operations failure due to a MR
being invalidated. Fix this by adding the mlx5 enumeration for fencing
RDMA/atomic operations and fix the logic to apply this.

Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: Eli Cohen 
Signed-off-by: Leon Romanovsky 
Signed-off-by: Doug Ledford 
Signed-off-by: Jiri Slaby

IB/mlx5: Fix returned values of query QP

2016-08-19T07:51:21+00:00

commit 0540d8148d419bf769e5aa99c77027febd8922f0 upstream.

Some variables were not initialized properly: max_recv_wr,
max_recv_sge, max_send_wr, qp_context and max_inline_data.

Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB...')
Signed-off-by: Noa Osherovich 
Signed-off-by: Leon Romanovsky 
Reviewed-by: Sagi Grimberg 
Signed-off-by: Doug Ledford 
Signed-off-by: Jiri Slaby

IB/mlx4: Properly initialize GRH TClass and FlowLabel in AHs

2016-07-21T06:35:58+00:00

commit 8c5122e45a10a9262f872b53f151a592e870f905 upstream.

When this code was reworked for IBoE support the order of assignments
for the sl_tclass_flowlabel got flipped around resulting in
TClass & FlowLabel being permanently set to 0 in the packet headers.

This breaks IB routers that rely on these headers, but only affects
kernel users - libmlx4 does this properly for user space.

Fixes: fa417f7b520e ("IB/mlx4: Add support for IBoE")
Signed-off-by: Jason Gunthorpe 
Signed-off-by: Doug Ledford 
Signed-off-by: Jiri Slaby