<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/drivers/infiniband/ulp, branch v5.1.2</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi</title>
<updated>2019-03-10T00:53:47+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2019-03-10T00:53:47+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=92fff53b7191cae566be9ca6752069426c7f8241'/>
<id>92fff53b7191cae566be9ca6752069426c7f8241</id>
<content type='text'>
Pull SCSI updates from James Bottomley:
 "This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc,
  hisi_sas, target/iscsi and target/core.

  Additionally Christoph refactored gdth as part of the dma changes. The
  major mid-layer change this time is the removal of bidi commands and
  with them the whole of the osd/exofs driver and filesystem. This is a
  major simplification for block and mq in particular"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (240 commits)
  scsi: cxgb4i: validate tcp sequence number only if chip version &lt;= T5
  scsi: cxgb4i: get pf number from lldi-&gt;pf
  scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c
  scsi: mpt3sas: Add missing breaks in switch statements
  scsi: aacraid: Fix missing break in switch statement
  scsi: kill command serial number
  scsi: csiostor: drop serial_number usage
  scsi: mvumi: use request tag instead of serial_number
  scsi: dpt_i2o: remove serial number usage
  scsi: st: osst: Remove negative constant left-shifts
  scsi: ufs-bsg: Allow reading descriptors
  scsi: ufs: Allow reading descriptor via raw upiu
  scsi: ufs-bsg: Change the calling convention for write descriptor
  scsi: ufs: Remove unused device quirks
  Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  scsi: megaraid_sas: Remove a bunch of set but not used variables
  scsi: clean obsolete return values of eh_timed_out
  scsi: sd: Optimal I/O size should be a multiple of physical block size
  scsi: MAINTAINERS: SCSI initiator and target tweaks
  scsi: fcoe: make use of fip_mode enum complete
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull SCSI updates from James Bottomley:
 "This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc,
  hisi_sas, target/iscsi and target/core.

  Additionally Christoph refactored gdth as part of the dma changes. The
  major mid-layer change this time is the removal of bidi commands and
  with them the whole of the osd/exofs driver and filesystem. This is a
  major simplification for block and mq in particular"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (240 commits)
  scsi: cxgb4i: validate tcp sequence number only if chip version &lt;= T5
  scsi: cxgb4i: get pf number from lldi-&gt;pf
  scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c
  scsi: mpt3sas: Add missing breaks in switch statements
  scsi: aacraid: Fix missing break in switch statement
  scsi: kill command serial number
  scsi: csiostor: drop serial_number usage
  scsi: mvumi: use request tag instead of serial_number
  scsi: dpt_i2o: remove serial number usage
  scsi: st: osst: Remove negative constant left-shifts
  scsi: ufs-bsg: Allow reading descriptors
  scsi: ufs: Allow reading descriptor via raw upiu
  scsi: ufs-bsg: Change the calling convention for write descriptor
  scsi: ufs: Remove unused device quirks
  Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  scsi: megaraid_sas: Remove a bunch of set but not used variables
  scsi: clean obsolete return values of eh_timed_out
  scsi: sd: Optimal I/O size should be a multiple of physical block size
  scsi: MAINTAINERS: SCSI initiator and target tweaks
  scsi: fcoe: make use of fip_mode enum complete
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma</title>
<updated>2019-03-09T23:53:03+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2019-03-09T23:53:03+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=a50243b1ddcdd766d0d17fbfeeb1a22e62fdc461'/>
<id>a50243b1ddcdd766d0d17fbfeeb1a22e62fdc461</id>
<content type='text'>
Pull rdma updates from Jason Gunthorpe:
 "This has been a slightly more active cycle than normal with ongoing
  core changes and quite a lot of collected driver updates.

   - Various driver fixes for bnxt_re, cxgb4, hns, mlx5, pvrdma, rxe

   - A new data transfer mode for HFI1 giving higher performance

   - Significant functional and bug fix update to the mlx5
     On-Demand-Paging MR feature

   - A chip hang reset recovery system for hns

   - Change mm-&gt;pinned_vm to an atomic64

   - Update bnxt_re to support a new 57500 chip

   - A sane netlink 'rdma link add' method for creating rxe devices and
     fixing the various unregistration race conditions in rxe's
     unregister flow

   - Allow lookup up objects by an ID over netlink

   - Various reworking of the core to driver interface:
       - drivers should not assume umem SGLs are in PAGE_SIZE chunks
       - ucontext is accessed via udata not other means
       - start to make the core code responsible for object memory
         allocation
       - drivers should convert struct device to struct ib_device via a
         helper
       - drivers have more tools to avoid use after unregister problems"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (280 commits)
  net/mlx5: ODP support for XRC transport is not enabled by default in FW
  IB/hfi1: Close race condition on user context disable and close
  RDMA/umem: Revert broken 'off by one' fix
  RDMA/umem: minor bug fix in error handling path
  RDMA/hns: Use GFP_ATOMIC in hns_roce_v2_modify_qp
  cxgb4: kfree mhp after the debug print
  IB/rdmavt: Fix concurrency panics in QP post_send and modify to error
  IB/rdmavt: Fix loopback send with invalidate ordering
  IB/iser: Fix dma_nents type definition
  IB/mlx5: Set correct write permissions for implicit ODP MR
  bnxt_re: Clean cq for kernel consumers only
  RDMA/uverbs: Don't do double free of allocated PD
  RDMA: Handle ucontext allocations by IB/core
  RDMA/core: Fix a WARN() message
  bnxt_re: fix the regression due to changes in alloc_pbl
  IB/mlx4: Increase the timeout for CM cache
  IB/core: Abort page fault handler silently during owning process exit
  IB/mlx5: Validate correct PD before prefetch MR
  IB/mlx5: Protect against prefetch of invalid MR
  RDMA/uverbs: Store PR pointer before it is overwritten
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull rdma updates from Jason Gunthorpe:
 "This has been a slightly more active cycle than normal with ongoing
  core changes and quite a lot of collected driver updates.

   - Various driver fixes for bnxt_re, cxgb4, hns, mlx5, pvrdma, rxe

   - A new data transfer mode for HFI1 giving higher performance

   - Significant functional and bug fix update to the mlx5
     On-Demand-Paging MR feature

   - A chip hang reset recovery system for hns

   - Change mm-&gt;pinned_vm to an atomic64

   - Update bnxt_re to support a new 57500 chip

   - A sane netlink 'rdma link add' method for creating rxe devices and
     fixing the various unregistration race conditions in rxe's
     unregister flow

   - Allow lookup up objects by an ID over netlink

   - Various reworking of the core to driver interface:
       - drivers should not assume umem SGLs are in PAGE_SIZE chunks
       - ucontext is accessed via udata not other means
       - start to make the core code responsible for object memory
         allocation
       - drivers should convert struct device to struct ib_device via a
         helper
       - drivers have more tools to avoid use after unregister problems"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (280 commits)
  net/mlx5: ODP support for XRC transport is not enabled by default in FW
  IB/hfi1: Close race condition on user context disable and close
  RDMA/umem: Revert broken 'off by one' fix
  RDMA/umem: minor bug fix in error handling path
  RDMA/hns: Use GFP_ATOMIC in hns_roce_v2_modify_qp
  cxgb4: kfree mhp after the debug print
  IB/rdmavt: Fix concurrency panics in QP post_send and modify to error
  IB/rdmavt: Fix loopback send with invalidate ordering
  IB/iser: Fix dma_nents type definition
  IB/mlx5: Set correct write permissions for implicit ODP MR
  bnxt_re: Clean cq for kernel consumers only
  RDMA/uverbs: Don't do double free of allocated PD
  RDMA: Handle ucontext allocations by IB/core
  RDMA/core: Fix a WARN() message
  bnxt_re: fix the regression due to changes in alloc_pbl
  IB/mlx4: Increase the timeout for CM cache
  IB/core: Abort page fault handler silently during owning process exit
  IB/mlx5: Validate correct PD before prefetch MR
  IB/mlx5: Protect against prefetch of invalid MR
  RDMA/uverbs: Store PR pointer before it is overwritten
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>IB/iser: Fix dma_nents type definition</title>
<updated>2019-03-04T19:40:25+00:00</updated>
<author>
<name>Max Gurtovoy</name>
<email>maxg@mellanox.com</email>
</author>
<published>2019-02-26T10:22:11+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=c1545f1a200f4adc4ef8dd534bf33e2f1aa22c2f'/>
<id>c1545f1a200f4adc4ef8dd534bf33e2f1aa22c2f</id>
<content type='text'>
The retured value from ib_dma_map_sg saved in dma_nents variable. To avoid
future mismatch between types, define dma_nents as an integer instead of
unsigned.

Fixes: 57b26497fabe ("IB/iser: Pass the correct number of entries for dma mapped SGL")
Reported-by: Dan Carpenter &lt;dan.carpenter@oracle.com&gt;
Reviewed-by: Israel Rukshin &lt;israelr@mellanox.com&gt;
Signed-off-by: Max Gurtovoy &lt;maxg@mellanox.com&gt;
Acked-by: Sagi Grimberg &lt;sagi@grimberg.me&gt;
Reviewed-by: Dan Carpenter &lt;dan.carpenter@oracle.com&gt;
Signed-off-by: Jason Gunthorpe &lt;jgg@mellanox.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The retured value from ib_dma_map_sg saved in dma_nents variable. To avoid
future mismatch between types, define dma_nents as an integer instead of
unsigned.

Fixes: 57b26497fabe ("IB/iser: Pass the correct number of entries for dma mapped SGL")
Reported-by: Dan Carpenter &lt;dan.carpenter@oracle.com&gt;
Reviewed-by: Israel Rukshin &lt;israelr@mellanox.com&gt;
Signed-off-by: Max Gurtovoy &lt;maxg@mellanox.com&gt;
Acked-by: Sagi Grimberg &lt;sagi@grimberg.me&gt;
Reviewed-by: Dan Carpenter &lt;dan.carpenter@oracle.com&gt;
Signed-off-by: Jason Gunthorpe &lt;jgg@mellanox.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>RDMA: Add and use rdma_for_each_port</title>
<updated>2019-02-19T17:13:39+00:00</updated>
<author>
<name>Jason Gunthorpe</name>
<email>jgg@mellanox.com</email>
</author>
<published>2019-02-13T04:12:47+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=ea1075edcbab7d92f4e4ccf5490043f796bf78be'/>
<id>ea1075edcbab7d92f4e4ccf5490043f796bf78be</id>
<content type='text'>
We have many loops iterating over all of the end port numbers on a struct
ib_device, simplify them with a for_each helper.

Reviewed-by: Parav Pandit &lt;parav@mellanox.com&gt;
Signed-off-by: Jason Gunthorpe &lt;jgg@mellanox.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
We have many loops iterating over all of the end port numbers on a struct
ib_device, simplify them with a for_each helper.

Reviewed-by: Parav Pandit &lt;parav@mellanox.com&gt;
Signed-off-by: Jason Gunthorpe &lt;jgg@mellanox.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>IB/ipoib: Use __func__ instead of function's name</title>
<updated>2019-02-14T21:48:58+00:00</updated>
<author>
<name>Erez Alfasi</name>
<email>ereza@mellanox.com</email>
</author>
<published>2019-02-13T17:12:02+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=0dd9ce18b9f315878894351595a53dd81fdd8598'/>
<id>0dd9ce18b9f315878894351595a53dd81fdd8598</id>
<content type='text'>
Changed debug statements to use %s and __func__ instead
of hard-coded function's name.

Signed-off-by: Erez Alfasi &lt;ereza@mellanox.com&gt;
Signed-off-by: Leon Romanovsky &lt;leonro@mellanox.com&gt;
Signed-off-by: Jason Gunthorpe &lt;jgg@mellanox.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Changed debug statements to use %s and __func__ instead
of hard-coded function's name.

Signed-off-by: Erez Alfasi &lt;ereza@mellanox.com&gt;
Signed-off-by: Leon Romanovsky &lt;leonro@mellanox.com&gt;
Signed-off-by: Jason Gunthorpe &lt;jgg@mellanox.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>scsi: target/iscsi: Fix spelling of "unsolicited"</title>
<updated>2019-02-05T02:33:59+00:00</updated>
<author>
<name>Bart Van Assche</name>
<email>bvanassche@acm.org</email>
</author>
<published>2019-01-25T18:34:54+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=0300b1147e528fe6f6b0632b0ef353a87810dabf'/>
<id>0300b1147e528fe6f6b0632b0ef353a87810dabf</id>
<content type='text'>
Change "unsoliticed" into "unsolicited".

Cc: Nicholas Bellinger &lt;nab@linux-iscsi.org&gt;
Cc: Mike Christie &lt;mchristi@redhat.com&gt;
Cc: Christoph Hellwig &lt;hch@lst.de&gt;
Cc: Hannes Reinecke &lt;hare@suse.de&gt;
Cc: Sagi Grimberg &lt;sagi@grimberg.me&gt;
Signed-off-by: Bart Van Assche &lt;bvanassche@acm.org&gt;
Signed-off-by: Martin K. Petersen &lt;martin.petersen@oracle.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Change "unsoliticed" into "unsolicited".

Cc: Nicholas Bellinger &lt;nab@linux-iscsi.org&gt;
Cc: Mike Christie &lt;mchristi@redhat.com&gt;
Cc: Christoph Hellwig &lt;hch@lst.de&gt;
Cc: Hannes Reinecke &lt;hare@suse.de&gt;
Cc: Sagi Grimberg &lt;sagi@grimberg.me&gt;
Signed-off-by: Bart Van Assche &lt;bvanassche@acm.org&gt;
Signed-off-by: Martin K. Petersen &lt;martin.petersen@oracle.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>scsi: RDMA/srpt: Fix a credit leak for aborted commands</title>
<updated>2019-02-05T02:32:01+00:00</updated>
<author>
<name>Bart Van Assche</name>
<email>bvanassche@acm.org</email>
</author>
<published>2019-01-25T18:34:51+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=40ca8757291ca7a8775498112d320205b2a2e571'/>
<id>40ca8757291ca7a8775498112d320205b2a2e571</id>
<content type='text'>
Make sure that the next time a response is sent to the initiator that the
credit it had allocated for the aborted request gets freed.

Cc: Doug Ledford &lt;dledford@redhat.com&gt;
Cc: Jason Gunthorpe &lt;jgg@ziepe.ca&gt;
Cc: Nicholas Bellinger &lt;nab@linux-iscsi.org&gt;
Cc: Mike Christie &lt;mchristi@redhat.com&gt;
Cc: Hannes Reinecke &lt;hare@suse.com&gt;
Cc: Christoph Hellwig &lt;hch@lst.de&gt;
Fixes: 131e6abc674e ("target: Add TFO-&gt;abort_task for aborted task resources release") # v3.15
Signed-off-by: Bart Van Assche &lt;bvanassche@acm.org&gt;
Signed-off-by: Martin K. Petersen &lt;martin.petersen@oracle.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Make sure that the next time a response is sent to the initiator that the
credit it had allocated for the aborted request gets freed.

Cc: Doug Ledford &lt;dledford@redhat.com&gt;
Cc: Jason Gunthorpe &lt;jgg@ziepe.ca&gt;
Cc: Nicholas Bellinger &lt;nab@linux-iscsi.org&gt;
Cc: Mike Christie &lt;mchristi@redhat.com&gt;
Cc: Hannes Reinecke &lt;hare@suse.com&gt;
Cc: Christoph Hellwig &lt;hch@lst.de&gt;
Fixes: 131e6abc674e ("target: Add TFO-&gt;abort_task for aborted task resources release") # v3.15
Signed-off-by: Bart Van Assche &lt;bvanassche@acm.org&gt;
Signed-off-by: Martin K. Petersen &lt;martin.petersen@oracle.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>scsi: RDMA/srpt: Rework I/O context allocation</title>
<updated>2019-02-05T02:31:37+00:00</updated>
<author>
<name>Bart Van Assche</name>
<email>bvanassche@acm.org</email>
</author>
<published>2019-01-25T18:34:50+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=fd1b6687091450b0ca3303c97f45ecd87401c3d7'/>
<id>fd1b6687091450b0ca3303c97f45ecd87401c3d7</id>
<content type='text'>
Instead of maintaining a list of free I/O contexts, use an sbitmap data
structure to track which I/O contexts are in use and which are free. This
makes the ib_srpt driver more consistent with other LIO drivers.

Cc: Doug Ledford &lt;dledford@redhat.com&gt;
Cc: Jason Gunthorpe &lt;jgg@ziepe.ca&gt;
Cc: Nicholas Bellinger &lt;nab@linux-iscsi.org&gt;
Cc: Mike Christie &lt;mchristi@redhat.com&gt;
Cc: Hannes Reinecke &lt;hare@suse.com&gt;
Cc: Christoph Hellwig &lt;hch@lst.de&gt;
Signed-off-by: Bart Van Assche &lt;bvanassche@acm.org&gt;
Signed-off-by: Martin K. Petersen &lt;martin.petersen@oracle.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Instead of maintaining a list of free I/O contexts, use an sbitmap data
structure to track which I/O contexts are in use and which are free. This
makes the ib_srpt driver more consistent with other LIO drivers.

Cc: Doug Ledford &lt;dledford@redhat.com&gt;
Cc: Jason Gunthorpe &lt;jgg@ziepe.ca&gt;
Cc: Nicholas Bellinger &lt;nab@linux-iscsi.org&gt;
Cc: Mike Christie &lt;mchristi@redhat.com&gt;
Cc: Hannes Reinecke &lt;hare@suse.com&gt;
Cc: Christoph Hellwig &lt;hch@lst.de&gt;
Signed-off-by: Bart Van Assche &lt;bvanassche@acm.org&gt;
Signed-off-by: Martin K. Petersen &lt;martin.petersen@oracle.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>scsi: RDMA/srpt: Fix handling of TMF submission failure</title>
<updated>2019-02-05T02:30:37+00:00</updated>
<author>
<name>Bart Van Assche</name>
<email>bvanassche@acm.org</email>
</author>
<published>2019-01-25T18:34:49+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=337ec69ed761ae02a5d1226d607c487fedbd8dd7'/>
<id>337ec69ed761ae02a5d1226d607c487fedbd8dd7</id>
<content type='text'>
If submitting a TMF to the target core fails, send the "FUNCTION REJECTED"
response to the initiator.

Reviewed-by: Hannes Reinecke &lt;hare@suse.com&gt;
Cc: Doug Ledford &lt;dledford@redhat.com&gt;
Cc: Jason Gunthorpe &lt;jgg@ziepe.ca&gt;
Cc: Nicholas Bellinger &lt;nab@linux-iscsi.org&gt;
Cc: Mike Christie &lt;mchristi@redhat.com&gt;
Cc: Christoph Hellwig &lt;hch@lst.de&gt;
Signed-off-by: Bart Van Assche &lt;bvanassche@acm.org&gt;
Signed-off-by: Martin K. Petersen &lt;martin.petersen@oracle.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
If submitting a TMF to the target core fails, send the "FUNCTION REJECTED"
response to the initiator.

Reviewed-by: Hannes Reinecke &lt;hare@suse.com&gt;
Cc: Doug Ledford &lt;dledford@redhat.com&gt;
Cc: Jason Gunthorpe &lt;jgg@ziepe.ca&gt;
Cc: Nicholas Bellinger &lt;nab@linux-iscsi.org&gt;
Cc: Mike Christie &lt;mchristi@redhat.com&gt;
Cc: Christoph Hellwig &lt;hch@lst.de&gt;
Signed-off-by: Bart Van Assche &lt;bvanassche@acm.org&gt;
Signed-off-by: Martin K. Petersen &lt;martin.petersen@oracle.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>scsi: RDMA/srpt: Fix handling of command / TMF submission failure</title>
<updated>2019-02-05T02:29:45+00:00</updated>
<author>
<name>Bart Van Assche</name>
<email>bvanassche@acm.org</email>
</author>
<published>2019-01-25T18:34:48+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=8b8807b9e982e4ba05da8c0092f3c101daec5b2c'/>
<id>8b8807b9e982e4ba05da8c0092f3c101daec5b2c</id>
<content type='text'>
If submitting an SRP IU to the target core fails, send the SCSI response
"BUSY" to the initiator instead of not sending any response.

Reviewed-by: Hannes Reinecke &lt;hare@suse.com&gt;
Cc: Doug Ledford &lt;dledford@redhat.com&gt;
Cc: Jason Gunthorpe &lt;jgg@ziepe.ca&gt;
Cc: Nicholas Bellinger &lt;nab@linux-iscsi.org&gt;
Cc: Mike Christie &lt;mchristi@redhat.com&gt;
Cc: Christoph Hellwig &lt;hch@lst.de&gt;
Signed-off-by: Bart Van Assche &lt;bvanassche@acm.org&gt;
Signed-off-by: Martin K. Petersen &lt;martin.petersen@oracle.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
If submitting an SRP IU to the target core fails, send the SCSI response
"BUSY" to the initiator instead of not sending any response.

Reviewed-by: Hannes Reinecke &lt;hare@suse.com&gt;
Cc: Doug Ledford &lt;dledford@redhat.com&gt;
Cc: Jason Gunthorpe &lt;jgg@ziepe.ca&gt;
Cc: Nicholas Bellinger &lt;nab@linux-iscsi.org&gt;
Cc: Mike Christie &lt;mchristi@redhat.com&gt;
Cc: Christoph Hellwig &lt;hch@lst.de&gt;
Signed-off-by: Bart Van Assche &lt;bvanassche@acm.org&gt;
Signed-off-by: Martin K. Petersen &lt;martin.petersen@oracle.com&gt;
</pre>
</div>
</content>
</entry>
</feed>
